Dude... Thank you for an in depth video... That side panel you had to pull down on with a pick tool was giving me fits till I saw this vid. You're only one that explained it correctly!
Excellent video, thanks for the detailed instructions. I’m about to install LED light bars(small ones) in the grill on either side of the RAM emblem. I must say after searching and looking at many videos on this subject, your video was the best. Thanks.👍
Thanks for the video, I'm a tech and you saved me sooo much time, Alldata is wrong LOL, they don't tell you how to release the side panel LOL...Thanks again!
Yes but clips won’t move so easily, take a flathead and push the clips in from the backside where they lock. Pull the flares at the same time and you’ll see an opportunity to remove it. Once you have the first 3 out the rest should undo easily.
It was done in a permanent paint finish which required me to remove the grille, a liquid spray wrap can be done without removing it if you decide to go that route.
Correct, it’s difficult to vinyl wrap but if you have it spray wrapped the grille can stay on. Spray wraps has that advantage vs a vinyl wrap because you don’t have to remove any parts.
@@newtouchauto is that what you did you spray wrapped? Since I've already had the outer parts of the frame wrapped I'd rather have the grill wrapped. So I just want to make sure that it can be done before I go ahead and start the. I imagine it's just a bunch of clips that hold the grill onto the grill frame
@@Unconventionalreefer no this vehicle was finished in a permanent paint finish. Yeah once you have the grille removed the clips are the last obstacle.
Thanks and I appreciate you for watching the video. I’m open to hearing your pitch on the sponsored products, you can reach me by email newtouchauto@yahoo.com
Changed headlights yesterday…. The wheel well liners and the fender flares were the pain in the a**… putting the liner back properly and removing the flares… def popped some clips and cracked an internal piece that holds one of the clips on both fenders but all in all I successfully changed the lights and everybody thinks they look dope. 🫡 wil buy more clips as replacements if I can.
Thanks for watching the video and sharing your experience. It’s normal to break a few clips when disassembling any parts but at least they’re at our local auto parts stores. I’m glad that you were successful with your installation though.
I never comment on videos, but just had to say this was the best, most thorough video ever. Great job on the video !!! Very well done !!!
Thanks for the compliment and watching the video, I really appreciate your reply.
I agree, I think it would be impossible to do better!
I appreciate your compliment and sharing your thoughts.
Dude... Thank you for an in depth video... That side panel you had to pull down on with a pick tool was giving me fits till I saw this vid. You're only one that explained it correctly!
Thanks for the compliment and watching the video, I already know the frustration you experienced and I’m glad to be of help.
Did a GREAT job o n video
Thank you ,saved my customer a bunch of money
Thanks for the compliment and watching the video, I’m glad you found this to be helpful.
Great video my guy!! Very helpful and easy to follow.
You’re welcome and thank you for watching the video.
Excellent video, thanks for the detailed instructions. I’m about to install LED light bars(small ones) in the grill on either side of the RAM emblem. I must say after searching and looking at many videos on this subject, your video was the best. Thanks.👍
You’re welcome and that’s gonna look tough when it’s done. Thanks for the compliment and watching the video.
Thanks for the video, I'm a tech and you saved me sooo much time, Alldata is wrong LOL, they don't tell you how to release the side panel LOL...Thanks again!
You’re welcome and I’m glad that you found use in this video. Thanks for sharing your thoughts and watching.
Saved me on the front corner panels. Thanks you!!
You’re welcome and thank you for watching the video.
The attention to detail from you is amazing thank you I was sure struggling 😂😂😂
You’re welcome and thanks for watching the video, trust me when I say I can relate to your struggles 😆
Excelente work bro👏🏻👏🏻👏🏻👏🏻👏🏻
Thank you so much. Just the video I needed.
You’re welcome and thank you for watching the video.
Thanks, you really saved my butt with this one!
You’re welcome and I’m glad that it was helpful, thank you for watching the video.
Thanks for the video it was a time saver 🙌
You’re welcome and I’m glad to be of help, thanks for watching the video.
Very helpful! Thanks!
You’re welcome and thanks for watching the video.
Thanks bro. Great detail and patience!
You’re welcome and thank you for watching the video.
You make this look a lot easier than it was 😅
😆 I didn’t enjoy it at all until everything was put back together. Thanks for watching the video.
How do you remove the fender flare clips? Just pull on the flare?
Yes but clips won’t move so easily, take a flathead and push the clips in from the backside where they lock. Pull the flares at the same time and you’ll see an opportunity to remove it. Once you have the first 3 out the rest should undo easily.
this is an awesome and very helpful video
Thanks for watching the video and sharing your thoughts.
This video is damn good. Theres a chick doin it for install of rough country lights and she has no fuckin clue.
😆 well I’m glad that you found this helpful, thanks for watching the video.
How did you blackout the grille? I’m deciding between wrapping or painting…
It was done in a permanent paint finish which required me to remove the grille, a liquid spray wrap can be done without removing it if you decide to go that route.
@@newtouchautoIs the paint fairly durable?
@@pjfan173 Yes, with the proper steps completed before painting no issues occurred.
@@newtouchauto Thanks for the reply
You’re welcome and thank you for watching the video.
Do the horizontal strips come apart from the frame of the grill? Im trying to have mine wrapped and the shop said it needs to be disassembled first
Correct, it’s difficult to vinyl wrap but if you have it spray wrapped the grille can stay on. Spray wraps has that advantage vs a vinyl wrap because you don’t have to remove any parts.
@@newtouchauto is that what you did you spray wrapped? Since I've already had the outer parts of the frame wrapped I'd rather have the grill wrapped. So I just want to make sure that it can be done before I go ahead and start the. I imagine it's just a bunch of clips that hold the grill onto the grill frame
@@Unconventionalreefer no this vehicle was finished in a permanent paint finish. Yeah once you have the grille removed the clips are the last obstacle.
Hi, I like your content. Do you accept sponsored products?
Thanks and I appreciate you for watching the video. I’m open to hearing your pitch on the sponsored products, you can reach me by email newtouchauto@yahoo.com
@@newtouchauto hi
I have just sent you an email.
I’ll take a look at it tomorrow morning
FYI… it’s not Dodge anymore. Just RAM. Stelantis split em up years ago
Really! I wasn’t aware of the change.
Changed headlights yesterday…. The wheel well liners and the fender flares were the pain in the a**… putting the liner back properly and removing the flares… def popped some clips and cracked an internal piece that holds one of the clips on both fenders but all in all I successfully changed the lights and everybody thinks they look dope. 🫡 wil buy more clips as replacements if I can.
Thanks for watching the video and sharing your experience. It’s normal to break a few clips when disassembling any parts but at least they’re at our local auto parts stores. I’m glad that you were successful with your installation though.