Encasing An Entire Can Of Pringles In Clear Epoxy Resin
Vložit
- čas přidán 11. 02. 2022
- We tried encasing an entire can of Pringles in clear epoxy resin. It took some learnding but we figured it out. The results weren't half bad actually.
🔪🔪 waterjetknives.com 🗡️🗡️
Are you or anyone you know going through a divorce? If so, i'm sorry to hear about it, but we'd love to help divide the assets.
Music: David Cutter Music - www.davidcuttermusic.com
Don’t steal our videos, if you’d like to use our video for something please contact us via email. - Zábava
Honestly, I didn't know that Dan and Mitchell even had normal jobs at the shop. I thought all they did was make circles on water jet.
Literally my exact thought. Dan and Mitchell do actual work?!
Yeah they make knife blanks, even better than circles
Lmaooo that made me laugh probably more than it should have.
"Why's it so milky, what'd you do to it?" Dan is 100% going to do something to you.
I love how of all channels it’s Waterjet Channel that’s creating groundbreaking techniques for resin projects 😂
Keep it up guys!
I’m just as shocked as you are
@@WaterjetChannel were the other guys go ?
im fine with this being the resin channel now, as long as its a bunch of relatable dudes who makes scuffed projects
It's really staring to feel like dan and Mitchell are becoming secondary charecters
I was glad to see some Dan this time
I think you should use a pressure pot. I think that would be a good idea.
Good thinking
I'm really surprised no one has mentioned this before.
Screw resin, this channel is called the water jet channel. That's what was great about this
Hey guys! I used to work in the hotel and food industry when we had to create displays with food we would paint the food in aspic gel which would essentially preserve the food and make it really shiny. You could try using that prior to dropping in resin.
Thanks! Love the channel!
Glad to see Dan make it in a video, though ‘Niel has been doing a great job with these videos lately
Your growth in resin knowledge is pretty impressive. The speed you have gained ability usually takes so many projects but your mix of expert advice and brute force until it works is great.
It's resin.. there is a wealth of knowledge out there so it'll be easy to learn fast.
Now we know where Dan has been all these weeks - bullfighting in his figure-hugging little ginger toreador jacket!!!
Toreador march is a great song especially on a music disk;)
They're the resin channel now. I'd like to see some raisins in resin.
Good to see you again Dan
Probably should have just used Original Pringles. The acid in the vinegar might have had a reaction with the resin causing the cloudiness.
In another episode of "the resin's channel". Does the resin taste like pringles?
Glad to see Dan is finally out of rehab (again.) ;)
Mold release spray would be your guys' best investment for resin projects like this
Poor Null I feel like he is the guinea pig for anything that is going to be painful or tedious in that shop.
That one felt smooth. Keep this format!
Resin actually burns better than I thought it would 😆😆
Welcome back Dan! Love the crop top!
Now we can finally see whats actually going on inside those cans
Wait. Were they *actually* doing work? I didn't know they actually worked there
Immediately I am reminded of how cursed the simplified pringles mascot is
This channel has become - that derp encasing greasy stuff in resin, plus some water jetting at the end. I’m not complaining though.
i think this is the first time in the history of the channel where we actually saw the guys do actual real life work
I like that I have the same welding helmet like the one seen in the video!
How much work did you get done that day you painted all of the Pringles individually with resin?That Sir is dedication!
Thanks for making a great video!
Can we start cutting things in half again? A hydraulic spool maybe - one of those complicated hydraulic computers that controls things like excavators.
1:38 That's the new variation on 4chan /mlp cumjar project. Pringles can. And it solidified. Everyday we stray futher from de wae.
@Waterjet Channel _Come on 1 Million Subscribers! It won't be long now! My 2 sons and dad (myself) love your channel!_ *Thanks* 👍
I honestly thought the bowl of noodles you guys slipped in there was some horrific maggoty mess lol
The years I have been watching your videos and I have always wanted to know what you do there. What do you really cut and make there? What happens way in the back that we can't see? What are your jobs? Who else works there and what do they do? Who is Creg (the boss, the owner)? Basically the in and outs of the workshop.
You guys can try stacked lay's chips if you decide to try it again, I believe there is less grease in them than there is in Pringles.
Glad to see some Dan this video
Welcome to the resin channel
Helllllllll yeah! Neature walk reference at 2:35
like how you guys made an end table out of the pizza, i think it would have been cool to make a lamp out of the pringles to sit on the pizza table, great video nonetheless
Welcome to the resin channel! Where we spend most of the time creating resin casts and a few seconds of waterjet cutting.
Not that I'm complaining, just saying
Im missing you throw stuff up the wall
4:13 big Lumpy Space Princess vibes.
Seal your mold and turn it upside down if it’s floating, basically sinks to the bottom visually
Fuckin LOVE this channel haha never clicked so fast, also glad theres more NUL in the videos.
ART!!!
Nyuntl really good on channel
1960's: I think we will have flying cars in 2022
2022:
Long shot but during the first 30 seconds I see that knife poster. Where can I get one of those?
hoooly shit i wasn't anticipating seeing a Neature Walk reference in the funny plastic chips video
I think this is now the resin casting channel.
Mitchell goes full Rambo mod !
Waterjet Channel - Top effort for the weirdest shit.
😂 these guys crack me up
You should actually create a candle with Pringles
Is that a set of them amazing RAYCON ear buds at 4:09 I hear they have the superior sound quality of top name brands but at a more affordable price.
Have you tried using some clear coat spray to prevent the Pringles from getting like that?
You should cut the clear one into a hexagon shape around the chips
Don't they have polishing belts for the belt sander?
Might have got the Pringles right the first go if they weren't salt and vinegar. The vinegar might have been the problem not the salt....
Do a "sleeve" of golf balls, and tennis balls.
The dirt on his forehead is delightful
you guys need to give up your epoxy resin privileges
This is so weird...I am literally eating Pringles when I got the notification for this video lol
I don't know why you didn't like the first one, I always have a tube of pringles with milk for breakfast, it's delicious
I have always subbed to this channel foe the two guys. They are so funny to see joke around and the water jet stuff was pretty cool. Not really a fan of this new person who has been doing more and more just him and resin
Thank u
Can you show us all the things that you've put in resin of cut in half?
nice
It hurts my soul to see those pringles encased in their epoxy tomb
0:04
Macho man Randy Savage would have been pleased.
I wanna see y’all turn that on the lathe
Strevor is really coming into his own making these ridiculous resin project videos lol
crying here... seeing pringles getting destroyed like this..RIP
This might sound crazy but hear me out. I think you should use a pressure pot.
My guess is that it was the starch from the potatoes that leached out and made it milky looking.
5:24
I am more amused that my comment was one of the ones chosen for the video than anything else
So is Nyül the dedicated resin guy?
Did they got smaller ???
Can I ask what happened to WestShop?
4:13 What he did was probably using the vinegar and salt chips. Vinegar has acetic acid and the sodium chloride along with whatever oils from cooking the chips are probably clouding the resin. Skip the flavored stuff and eliminate potential interferences. Fun videos as always 👍
Yes, use those salt & oil free chips.
The resin chanel jajajaja
When are you going to replace the water jet lines with resin and try to cut things totally destroying your crazy expensive machine?
Some how I can smell the Pringles
Was Dan doing real work? I’m confused.
I ate a chicken fried steak, mashed potatoes, gravy, and green beans in the amount of time this took.
0:56 he’s lost weight eh? Looking good Mitchell
i miss dan
finally, a reason to buy salt and vinegar
Are we going to talk about the hair at 6:35?
Glad they didn't cut the good one
I did buttered popped corn in resin. It didn't work out.
Haven't bought Pringles since they changed their icon
Water jet vs hydrophobic object when
Epoxy resin channel.
Polish resin with a torch, it's so much quicker
top ten times science went too far
We all know what the resin in the first pringles can looks like
rip environment
Try using candlewax instead of resin to make a real pringles candle!
4:14 bruh