@@with-Aryan I myself didnt find one good video that explains everything. In addition I heard about GrabCad shutting down and am interested in how the indestry works with version control and files sharing. Plus, i really like your videos and how you explain things. I think you'll do it in the best way
Hey Aryan, I remember in an older video you were talking about creating a video which would be on building something based on an idea. On what steps you need to keep in mind when creating a part when you don’t have a DWG to model. I was wondering if you are still planning on making that video?
Hi Aryan , got question about the setup. Do you think a ultra-wide monitor i a a game changer? Can you share info about your setup or make a dedicated video about pro/cons of the setups and device(muose/keyboard) you tried over your career? Thanks
I use an U-wide monitor and its working amazingly for me. It made me mroe productive. not just for SW part, but for every day use having multi tabs and windows open in parallet and cross working. so yeah, it does help and for SW, it stretch the area as much as I want to see the smaller details btter (i get to zoom in more)
Aryan--just stumbled upon your channel--loving it. I run a team of mechanical engineers that use solidworks. solidworks cloud question: does it allow more than one person modify the same part at the same time? OnShape is pushing that feature over solidworks cloud...any knowledge there?
only through writing a macro and running it in the Macro Editor in SOLIDWORKS inside tools>macro>n new And if you wan the code for that: Option Explicit Sub main() Dim swApp As SldWorks.SldWorks Dim swModel As SldWorks.ModelDoc2 Dim swAssy As SldWorks.AssemblyDoc Dim vComps As Variant Dim swComp As SldWorks.Component2 Dim i As Long Dim errors As Long Dim warnings As Long Dim bRet As Boolean Set swApp = Application.SldWorks Set swModel = swApp.ActiveDoc Set swAssy = swModel vComps = swAssy.GetComponents(True) For i = 0 To UBound(vComps) Set swComp = vComps(i) bRet = swComp.GetModelDoc2.SaveAs4(swComp.GetPathName & ".step", 0, errors, warnings) Next i End Sub
hi there. is it possible to show the range motion of an assembly in 2d in solidworks? like if i have a box can is show the state of door closed and open in a single drawing so that i can show much space it takes when the door is opened and closed.
Yes, it's possible to show the range of motion of an assembly in SolidWorks using configurations and drawing views. Here's a simplified step-by-step guide on how you can do this: Create Configurations: In your assembly file, create two configurations - one for the door closed and one for the door open. You can do this by going to the Configuration Manager (right-click on the top item in the FeatureManager and choose "Add Configuration"), give it a name (like "Door Open" and "Door Closed"), and then adjust your assembly to match the configuration. Save Assembly: Save your assembly after creating the configurations. Create a New Drawing: Now, create a new drawing from your assembly file (File > New > Drawing). Insert Views: In the drawing, you can insert two views of your assembly, one for each configuration. Go to Insert > Drawing View > Model, and in the Properties dialog box that appears, select the configuration you want to use for that view. Repeat this step for the second configuration. Position Views: Position the views so that they clearly show the range of motion of the door. You can also add dimensions or notes to indicate the space required when the door is opened and closed. Remember, this is a simplified guide. Depending on the complexity of your assembly, you might need to use more advanced techniques. But this should give you a good starting point.
Hi Aryan Im not an engineer, iam a student But sometimes i need to build something from skratch in solidworks. I have the problem of not getting the dimensions of my components match is other. Can u help me with that please?
you have to start learning about the multi-body design mode in SOLIDWORKS so you won't need measurements. You do, but it's all arbitary so you won't get it wrong basically. THis is not easy to adress over a comment to be honest. But there is that
sir i made a curve in 2d on solidworks with the help of project curve command but i want to extrude it but it cant, can you please tell me that this command(project curve ) is only applicable to make circular profiles?
The Project Curve command in SolidWorks is used to create a curve by projecting an existing sketch, face, plane, or surface onto another face, plane, or surface. It's not limited to creating circular profiles; it can create a variety of curve shapes depending on the geometry you're projecting and the surface you're projecting onto. However, if you're having trouble extruding the curve you've created with the Project Curve command, it might be because the curve is not closed or not planar. In SolidWorks, you can only extrude closed, planar sketches. Here are a few things you can try: Check if the curve is closed: If your curve is not a closed loop, you won't be able to extrude it. You can close the curve by adding additional sketch entities to connect the endpoints. Check if the curve is planar: If your curve is not on a single plane, you won't be able to extrude it. You can try creating a new sketch on a plane that intersects the curve, and then use the Convert Entities command to copy the curve onto the sketch. You should then be able to extrude the sketch. Use the Split Line command: If you're trying to create a raised or recessed feature on a surface, you might want to use the Split Line command instead of trying to extrude the curve. The Split Line command can divide a face into multiple separate faces, which you can then manipulate individually.
Hi. I want to convert some stl files to step in solidworks premium 2022. i have tried every possible way but the results are not satisfactory. i get the step files objects with facets but not smooth. Any suggestion how to fix this. regards
Last time I checked (about 2 months ago) yes, but you couldn't open the xDesign in local SW. so if you want to edit it there, you can but once you save it, you cannot bring it back to local. idk if they have changed this since then
Can you make a video about simulation in solidworks. I have searched youtube, but no video matches, or even comes close to your teaching style. You walk us through and *explain* to us, instead of just doing it.
Watch my webinar ▶ bit.ly/SCPNewSeries
موفق باشی آرین ویدیو های خوبی میسازی
Hi! Its unrelated but can you do a video about solidworks pdm? Plzzzzz
but there are already so many videos on that on CZcams. Why? are they not good?
@@with-Aryan I myself didnt find one good video that explains everything. In addition I heard about GrabCad shutting down and am interested in how the indestry works with version control and files sharing. Plus, i really like your videos and how you explain things. I think you'll do it in the best way
This is a great video. Keep up the good work
Thanks, will do!
I think no matter how capable could Chat-Gpt become in the future, you'll never be replaced because you are a True Master.
Fr
Damn man that so cheesy and I do appreciate it lol. I don't know. I think one way to survive is to become a brand of your own. Just a guess
How did you acquire all the knowledge of using solidworks? How long does it take from beginner to pro?
Awesome video sir
So nice of you
I like the fact that you don't care about the comments more than you care about the value that you give
Keep it up 🙌❤
Thanks man. I do read the comments though
Amazing video!! Good job Aryan !!
Thanks Brett!
Do you have a video showing camera and lighting setup?
I could do that, but I don't at the moment
Thank 🙇 you
Welcome 😊
Hey Aryan,
I remember in an older video you were talking about creating a video which would be on building something based on an idea. On what steps you need to keep in mind when creating a part when you don’t have a DWG to model.
I was wondering if you are still planning on making that video?
what what what? that's sounds interesting, what idea was that?
If i want to start youtube channel in designing so i want to use paid solidwork software or cracked work on ???
Pls answer
Thank you
paid!
ChatGPT just tells me but you show me. That’s still better.
Love that answer! There is still use for me in this world lol
Hi Aryan , got question about the setup.
Do you think a ultra-wide monitor i a a game changer?
Can you share info about your setup or make a dedicated video about pro/cons of the setups and device(muose/keyboard) you tried over your career?
Thanks
I use an U-wide monitor and its working amazingly for me. It made me mroe productive. not just for SW part, but for every day use having multi tabs and windows open in parallet and cross working. so yeah, it does help and for SW, it stretch the area as much as I want to see the smaller details btter (i get to zoom in more)
@@with-Aryan better than a double monitor setup ?
@@with-Aryan thanks again for your reply really appreciated 🤝
Can you tell us how to get the solidworks certification and how to be prepared for it ? Thanks
courses.solidworkstutorials.net/ yes, check my page
Can you tell me how i count the part in solidwork assembly by searching component.
Count the numbers or what?
@@with-Aryan yes total no. of quantity of child part by selecting particular component.
Aryan--just stumbled upon your channel--loving it. I run a team of mechanical engineers that use solidworks. solidworks cloud question: does it allow more than one person modify the same part at the same time? OnShape is pushing that feature over solidworks cloud...any knowledge there?
Of course! if you give access to more than one person on one project, you can manage their access and what they can control.
如何用语音配合ChatGPT来驱动Solidworks工作？
In an assembly, is there way to save each component separately as a STEP file without manually opening each part?
only through writing a macro and running it in the Macro Editor in SOLIDWORKS inside tools>macro>n new
And if you wan the code for that:
Option Explicit
Sub main()
Dim swApp As SldWorks.SldWorks
Dim swModel As SldWorks.ModelDoc2
Dim swAssy As SldWorks.AssemblyDoc
Dim vComps As Variant
Dim swComp As SldWorks.Component2
Dim i As Long
Dim errors As Long
Dim warnings As Long
Dim bRet As Boolean
Set swApp = Application.SldWorks
Set swModel = swApp.ActiveDoc
Set swAssy = swModel
vComps = swAssy.GetComponents(True)
For i = 0 To UBound(vComps)
Set swComp = vComps(i)
bRet = swComp.GetModelDoc2.SaveAs4(swComp.GetPathName & ".step", 0, errors, warnings)
Next i
End Sub
@@with-Aryan Thank you! You're a great help to us all.
hi there. is it possible to show the range motion of an assembly in 2d in solidworks? like if i have a box can is show the state of door closed and open in a single drawing so that i can show much space it takes when the door is opened and closed.
Yes, it's possible to show the range of motion of an assembly in SolidWorks using configurations and drawing views. Here's a simplified step-by-step guide on how you can do this:
Create Configurations: In your assembly file, create two configurations - one for the door closed and one for the door open. You can do this by going to the Configuration Manager (right-click on the top item in the FeatureManager and choose "Add Configuration"), give it a name (like "Door Open" and "Door Closed"), and then adjust your assembly to match the configuration.
Save Assembly: Save your assembly after creating the configurations.
Create a New Drawing: Now, create a new drawing from your assembly file (File > New > Drawing).
Insert Views: In the drawing, you can insert two views of your assembly, one for each configuration. Go to Insert > Drawing View > Model, and in the Properties dialog box that appears, select the configuration you want to use for that view. Repeat this step for the second configuration.
Position Views: Position the views so that they clearly show the range of motion of the door. You can also add dimensions or notes to indicate the space required when the door is opened and closed.
Remember, this is a simplified guide. Depending on the complexity of your assembly, you might need to use more advanced techniques. But this should give you a good starting point.
@@with-Aryan thanks for your time
Hi Aryan
Im not an engineer, iam a student
But sometimes i need to build something from skratch in solidworks. I have the problem of not getting the dimensions of my components match is other.
Can u help me with that please?
you have to start learning about the multi-body design mode in SOLIDWORKS so you won't need measurements. You do, but it's all arbitary so you won't get it wrong basically. THis is not easy to adress over a comment to be honest. But there is that
sir i made a curve in 2d on solidworks with the help of project curve command but i want to extrude it but it cant, can you please tell me that this command(project curve ) is only applicable to make circular profiles?
The Project Curve command in SolidWorks is used to create a curve by projecting an existing sketch, face, plane, or surface onto another face, plane, or surface. It's not limited to creating circular profiles; it can create a variety of curve shapes depending on the geometry you're projecting and the surface you're projecting onto.
However, if you're having trouble extruding the curve you've created with the Project Curve command, it might be because the curve is not closed or not planar. In SolidWorks, you can only extrude closed, planar sketches.
Here are a few things you can try:
Check if the curve is closed: If your curve is not a closed loop, you won't be able to extrude it. You can close the curve by adding additional sketch entities to connect the endpoints.
Check if the curve is planar: If your curve is not on a single plane, you won't be able to extrude it. You can try creating a new sketch on a plane that intersects the curve, and then use the Convert Entities command to copy the curve onto the sketch. You should then be able to extrude the sketch.
Use the Split Line command: If you're trying to create a raised or recessed feature on a surface, you might want to use the Split Line command instead of trying to extrude the curve. The Split Line command can divide a face into multiple separate faces, which you can then manipulate individually.
You're voice is familiar did you make a 8 chapter solidworks video course?
5 chapter! courses.solidworkstutorials.net/
@with-Aryan unfortunately I don't have the money to pay for the course otherwise I'd sign up 😕
where? 6 chapter
hmmmm..... we want a CAD that works with ai , and we just talk to it ..
I might be making one...
Hi. I want to convert some stl files to step in solidworks premium 2022. i have tried every possible way but the results are not satisfactory. i get the step files objects with facets but not smooth. Any suggestion how to fix this. regards
nah you explaining it is way better that ChatGPT raw information. Raw information was here since books were invented
Thanks man!
When taking your course, how do I install solidworks? Do you provide with a free version to learn it through your course?
hey, go to the 0.5 section inside the course and you'll see the instructions on how to do just that ;)
خوشحالم که ایرانی هستی
merci
20 doletas for me, Brazilian, is equaly to give up 10% of my payment haha
if you could partner up with a friend to use one account both of you. 5%, I'd say it's a worthy investment to how much advancement it will bring you.
Can we modify a solid work file in xdesign?
Last time I checked (about 2 months ago) yes, but you couldn't open the xDesign in local SW. so if you want to edit it there, you can but once you save it, you cannot bring it back to local. idk if they have changed this since then
you are a great techer but your course too expensive i can not effort
I do offer installments! do they help?
Can you make a video about simulation in solidworks. I have searched youtube, but no video matches, or even comes close to your teaching style. You walk us through and *explain* to us, instead of just doing it.
That is my next plan, first modeling, then GD&T for manufacture, now simulation to ensure whatever you model will not fail in real life.
Man i wish i own solidwork. But i cannot affort 10K dollars
School will give u for free
some schools, not all.
If you become my student in SCP, you can purchase on for $99!
No way till 2037 :)
🤣🤣🤣🤣🤣thank u for asking chat gpt
no problem! do you have GPT4? Many still don't!
No.
I do not understand your reply, are you for or against AI?
@@with-Aryan The answer to your title.
Thank 🙇 you
thanks for watching