Check out the plasma cutter : rover.ebay.com/rover/1/711-532... Music : Hip Hop Instrumental 2018 - "Cold Streets" | Markezi Producer | • Hip Hop Instrumental 2... Like and subscribe!
That was quite nice. I’d love to get a plasma cnc, but I’ve got so much stuff. I have no where to put it!. This will help somewhat. It’s one of the simplest motorized ones I’ve seen, and you’ve given me some ideas. I also like your presentation.
Here is idea for a little upgrade -you should add one of those laser pointers so you can do a test cut and see if you cut where you want it to cut.Great idea.
I definitely like it. You have inspired me to take a swing at my own version using my 60 amp Hypertherm. I'm thinking of something that can cut up to 4 foot sheets. That would really help me, plus eliminating the slag and weld back would be a big time saver and improve quality. Using your tool also will help tips live longer as it will eliminate tip drag. Good job my friend.
I think I’m going to build a portable design like this but use my Milwaukee drill as a the motor and some all thread like you did. Very smooth easy build thank you.
The plasma from the torch is swirling around, causing one side of the cut to be at an angle and the other side of the cut to be square (assuming your torch is square to the workpiece and at the proper distance from the workpiece). Something to be aware of so you can have the less desirable side of the cut on the scrap side.
Please can you link the parts you used in the description, like the bearing, threaded rod , coupling, motor and especially the speed controller. Thanks
Dear Nicolas i thank you for your video youtube. may i ask you the sketchup file to be sure about your amazing process? Thanks a lot. or only drawing pix of the structure thanks a lot
You’re having a problem cutting with a plasma because you’re supposed to pull the torch towards you when cutting You have to drag the tip towards you that’s why their called “ drag tips”. You never push a plasma torch when cutting
I'd also extend the sides a bit and insert some on/off magnets on each end so that the rail stays put on steel surfaces.
That was quite nice. I’d love to get a plasma cnc, but I’ve got so much stuff. I have no where to put it!. This will help somewhat. It’s one of the simplest motorized ones I’ve seen, and you’ve given me some ideas. I also like your presentation.
Here is idea for a little upgrade -you should add one of those laser pointers so you can do a test cut and see if you cut where you want it to cut.Great idea.
I definitely like it. You have inspired me to take a swing at my own version using my 60 amp Hypertherm. I'm thinking of something that can cut up to 4 foot sheets. That would really help me, plus eliminating the slag and weld back would be a big time saver and improve quality. Using your tool also will help tips live longer as it will eliminate tip drag. Good job my friend.
Great idea and simple versus others I’ve seen! I like simple! Please list the parts and descriptions! Thx
Looks great, I like the portability.. You can bring it to the sheet metal instead of the other way around, just what I need.
I think I’m going to build a portable design like this but use my Milwaukee drill as a the motor and some all thread like you did. Very smooth easy build thank you.
Great stuff. This is pretty much exactly what I was looking for. Thanks!
I can see this coming to my shop very quickly Thank you
really great just what i needed to see as my plasma is on the way to me.
Thankyou very much.
Excellent tout ça 😎 - Alex
awesome! building it... a must
Pretty neat I will have to try to make one
beau travail !
😃Congratulations my friend 👍👏👏👏👏good
Sweet!!! Parts list please!
Good project
Well done. I think you could do with a longer one!
Any plans to turn this into a X and Y track?
The plasma from the torch is swirling around, causing one side of the cut to be at an angle and the other side of the cut to be square (assuming your torch is square to the workpiece and at the proper distance from the workpiece). Something to be aware of so you can have the less desirable side of the cut on the scrap side.
I LOVE it
Nice job
Do you have a video on how you made the metal brake you used in this video?
Please can you link the parts you used in the description, like the bearing, threaded rod , coupling, motor and especially the speed controller. Thanks
Thank for the video. Can you provide the RPM the motor needs to be?
Very good
Грамотно Класс!!!!!!!
Love it,can you make another one for sale
ধন্যবাদ...
thanks
Dear Nicolas i thank you for your video youtube. may i ask you the sketchup file to be sure about your amazing process?
Thanks a lot. or only drawing pix of the structure
thanks a lot
If you really push the speed could you engrave with this?
can I use this plasma machine on cnc plasma cutting machine.
How about a parts list? Sources?
Can you please link the motor, coupler, and speed controller?
Also what did you do for the trigger switch on the plasma cutter?
Perfect. Now who manufactures one I can just buy? I’m not really into fiddling around with electronics and sourcing these misc parts.
Cool
Do you have plans of how we can copy this and make our own.
Can you provide us with those 3d plans for building?
Hola.me podria facilitar el diseño así lo puedo fabricar para mi taller muchas gracias
Из чего изготовлены направляющие трубы?
Olá amigo tem como vender esse projeto eu adorei.
Okay I gota have one how much
Got plans
First
Lol! Cheater
@@kabevis1 😁
I am join your company
You’re having a problem cutting with a plasma because you’re supposed to pull the torch towards you when cutting
You have to drag the tip towards you that’s why their called “ drag tips”. You never push a plasma torch when cutting
Does the torch need to be at an angle?
@@NicolasSalencPBP no straight Down. It’s different then when cutting with a cutting torch where you tip the torch forward slight.
Nice build 👍🏻👍🏻👍🏻
Werk daddy 😍😍🥵
Thank you son 😘
aluminum is pronounced (ALOO-MINUM
❤❤❤\\❤wowoxkwisi😊iksixisiwiisjsisjdksksksiskksskksksksisisisi❤❤❤😂😂😂🎉🎉🎉🎉😢😢😢😢😢😮😮😮😮😅😅😅😅