#AmplifierBridgeMode

Sdílet
Vložit
  • čas přidán 21. 08. 2024
  • What is amplifier bridging, Why it is required, How it is done and what is the conditions and cautions for it. किसी भी एम्पलीफायर को ब्रिज मोड पर कैसे चलाये. क्या सावधानिया रखे , क्या चीज जरूरी है ?
    #AmplifierBridgeMode
    #AmplifierBridging
    #AmplifierBridgingForHighpower
    #HighPowerAmplifier
    #AudioTechnology
    #ProfessionalAudio
    #amplifierBridgeModeExplained
    how to use a power amplifier in bridge mode ?

Komentáře • 413

  • @incrediblesunil7385
    @incrediblesunil7385 Před 2 lety +2

    सुपर सर आपके पास नॉलेज का भंडार
    आपका समझाने का तरीका बेहतरीन है,सही गलत सब अच्छी तरीके से समझाते हो,,

  • @tarunsinghrawat1916
    @tarunsinghrawat1916 Před 4 lety +6

    बहुत बढ़िया ,बहुत ही बढ़िया सर कमाल की जानकारी देते हैं। जारी रखें ऐसे ही....

  • @brahmpalsingharya5752
    @brahmpalsingharya5752 Před 4 lety +1

    AAP ka samjhane ka trika atulniya hai AAP ki jitani tarif ki jaye Kam hai AAP ke able video ka itagar rahega

  • @devdjproaudio6695
    @devdjproaudio6695 Před 4 lety +1

    Nice Information

  • @syedyaseen3700
    @syedyaseen3700 Před 4 lety +2

    Option 1 op-amp
    Option 2 coupling transformer 1x2
    Option 3 feed-back use
    ...............
    Great topic
    Well discription
    Good to understanding with you.
    Thanks

  • @hemantthorat5051
    @hemantthorat5051 Před 4 lety +1

    Nice topic

  • @dushyantpathak5564
    @dushyantpathak5564 Před 4 lety +2

    Bhai video mast lagi aap be Accha samghaya

  • @vivekkumarsinha9101
    @vivekkumarsinha9101 Před 4 lety +1

    Mst hai

  • @Vijayaudio69
    @Vijayaudio69 Před 4 lety +5

    Aap ki information mujhe bahut pasnd aati hai sir thanks..

  • @deepukumar1700
    @deepukumar1700 Před 4 lety +1

    Aapka video saare ke saare bahut Achcha hai

  • @gurmitsoundtarntaran1970
    @gurmitsoundtarntaran1970 Před 4 lety +1

    Very gud information sir

  • @RavinderKumar-zz7oj
    @RavinderKumar-zz7oj Před 4 lety +1

    Sab se lazabab tarika AIK systemic way

  • @sdrazzakrazzak7140
    @sdrazzakrazzak7140 Před 4 lety +1

    Thank you very much sir ji aap ki video dekh kar bahut kuchh sikhane ko milta hai very nice

  • @Rahul-qs8ss
    @Rahul-qs8ss Před 3 lety +1

    nice information sir
    thanku very much bahot acha samjaya

  • @Rajneeshkanchu
    @Rajneeshkanchu Před 2 lety +1

    i watched almost all your videos they are all great

  • @Rajneeshkanchu
    @Rajneeshkanchu Před 2 lety +1

    sir u r the best teacher

  • @muhammadsalman9134
    @muhammadsalman9134 Před 3 lety

    Waaah sir boht nice informative video banai h superb

  • @Audioguruji
    @Audioguruji Před 4 lety

    Video hamesha ki tarha , zabardast hai sir. #audioguruji

  • @muhammadzareef6770
    @muhammadzareef6770 Před 2 lety

    Superb video

  • @smartsolutions1217
    @smartsolutions1217 Před 3 lety +1

    You explain in very good manner

  • @anuragjain2623
    @anuragjain2623 Před 4 lety

    Veri nice sir pure you tube me koi itne asan tarike se nhi bata ta thank you

  • @mridulnath2468
    @mridulnath2468 Před 3 lety

    Sir aap bohot aacha samjhate ho keep it on👍👍👍👍👍

  • @rakeshpatel4561
    @rakeshpatel4561 Před 4 lety +1

    Sir waiting next video🤔🤔🙏🙏👍🏻👍🏻👍🏻

  • @HimanshuGoel210588
    @HimanshuGoel210588 Před 4 lety +2

    Sir, sabse pehle to thanks a lot, koi books ye sab nahi clear karti jo theory aur practical apne clear kiya hai.
    (It is 70 to 78 percent, meaning it will give output of 78 watts only if 100 watts power) - fir kya pure 100W achieve karne ke liye fir 40-0-40 ki jagah 45-0-45 use kare jo 126W-20%=100W degi. Aur kya 1 stereo pair of 2sc5200/2sa1943 is safe to run with 45-0-45 supply with bridge rectfier 1010 and 80v 10000uf capacitors (assuming 1000uf for 10W Power).
    Apka formula se ye clear hota hai ki jo speakers hai usme low Ohms pe high volts pass karne se sab safe rahega Qki jyada Ohms heat badhayega but quality nahi.

  • @ElectronicsFreakEF
    @ElectronicsFreakEF Před 4 lety +2

    Very beautifully explained. Easy to understand for noobs. Keep it up!! 👍👍

  • @akshaypatil283
    @akshaypatil283 Před 4 lety +1

    Nice

  • @Munnabhai842
    @Munnabhai842 Před 2 lety

    Very good yaar! Exelent 100/100

  • @ajaydhone2752
    @ajaydhone2752 Před 4 lety

    Nice video sir

  • @sarbjit668
    @sarbjit668 Před 4 lety

    Very nice knolge. Ur a grate

  • @jagannathsingh8965
    @jagannathsingh8965 Před 4 lety +2

    Sir car amplifiers kyun sirf 12v ki load pe aram se 1000/2000w aur usse bhi upar ki output nikalti hai, chahe wo class AB ya fir class D ho??? Lekin jab hum unhi class AB/D
    Amplifiers ko DIY karte hain gharpe, to jyada load kyun mangti hai wo bhi 50w se lekar 100/200w output nikalne ke liye?? Ye TOPIC ke upar
    Ek video banaiye.

  • @ElectroHubForAmp
    @ElectroHubForAmp Před 4 lety +2

    Okk

  • @RaviKumar-gj4te
    @RaviKumar-gj4te Před 3 lety

    Great sir

  • @arockstarstudio8703
    @arockstarstudio8703 Před 4 lety

    Yeh like k button mene aap k starting k index sun k hi daba diya nice work ♥️♥️

  • @jagdishsolanki3576
    @jagdishsolanki3576 Před 4 lety

    बहुत अच्छी जानकारी दी

  • @deepukumar1700
    @deepukumar1700 Před 4 lety +1

    Bahut Achcha video aapane banaya hi

  • @LokendraChouhan99996
    @LokendraChouhan99996 Před 4 lety +1

    I am waiting for next part of this video.

  • @jeromenilesh
    @jeromenilesh Před 4 lety +3

    Very well explained.this was indeed a fruitful session and I hope to watch similar and relevant videos in the future.keep posting and God bless

  • @narendersinghal9716
    @narendersinghal9716 Před 4 lety

    बहुत ही बढ़िया सर

  • @santumishra3550
    @santumishra3550 Před 3 lety

    Oooo nice informetion think sarji🆗🆗🆗🆗🆗

  • @rmjnm
    @rmjnm Před 4 lety +4

    Wow it's amazing. Sir you are great. The way you explain things is unique and simple. Love your channel for there is always new things to learn. I'm an electronic enthusiast especially audio amplifiers that's why I love watching your videos and appreciate them. Thank you very much and keep it up so that we could learn something.

    • @Audioguruji
      @Audioguruji Před 4 lety

      Bilkul sahi ja rahe ho bhai.
      #audioguruji 👈 click here ones

  • @karan55balotiya63
    @karan55balotiya63 Před 4 lety

    💝💝💝💝👍👍👍👍nis video sir

  • @amitprajapati3479
    @amitprajapati3479 Před 4 lety

    Supar sir

  • @ajaychavan5492
    @ajaychavan5492 Před 4 lety +1

    Very well explain sir

  • @shivmohan1397
    @shivmohan1397 Před 4 lety +9

    Waiting for next part 2

  • @microsoftfriends4372
    @microsoftfriends4372 Před 4 lety

    bohat kamal explain krty hain ap

  • @NeedToTech
    @NeedToTech Před 4 lety

    great

  • @experimentrj3125
    @experimentrj3125 Před 4 lety +1

    Very good brother

  • @papchater
    @papchater Před 3 lety +1

    I am spellbound by seeing your explanation, beautifully explained. mai yehi sochta tha ki India me eisa video koi kiu nahi banata hai ! But after seeing your channel, I become a fan of you, aour turant subscribe kar liya. zadatar channel me log board uthate hai connect karte hai our chalake dikhate hai bina koi technical explanation. But your videos are very up to the mark. keep doing the great videos. mera ek request hai ki aap dual voice coil wala speaker ke bare me v ek video baiye. ek 600 w mono amplifire ko ek 400 w 4 ohom dual voice coil woofer me keise chalye?

  • @vineetkumardas365
    @vineetkumardas365 Před 4 lety

    very informative sir for common peoples

  • @rockygomes2922
    @rockygomes2922 Před 4 lety

    Waiting for next video and thanks.

  • @jakk2ahao
    @jakk2ahao Před 4 lety +1

    Waiting for Gan FET video before lockdown ends lol...nice video.

    • @WhatIThink
      @WhatIThink  Před 4 lety

      Dear bro GaN based devices are still rare and circuit are in development stage only. If you are interested in MOSFET amp search Hilton AV400 on net.

  • @iamlegend4857
    @iamlegend4857 Před 4 lety

    sir ji i am very thankful for ur this video series....

  • @daljeetthind1988
    @daljeetthind1988 Před 4 lety +1

    next part pls

  • @sovankumarpatra
    @sovankumarpatra Před 4 lety

    I am waiting for next video..

  • @kumarshravannargada1039
    @kumarshravannargada1039 Před 4 lety +2

    Thanks,,for it,,
    I have to say you are amazing .
    I am waiting the next video.

  • @Hemant81Kumar
    @Hemant81Kumar Před 4 lety

    Very nice information bro 😊👌👍

  • @niranjantamhankar2651
    @niranjantamhankar2651 Před 4 lety

    Best explained

  • @VINODKUMAR-lv4jo
    @VINODKUMAR-lv4jo Před 3 lety

    Thanks sir

  • @yogendrapalraghav3738
    @yogendrapalraghav3738 Před 4 lety

    Sir, your way of explaining is very good
    Thanks for knowledge.

    • @Audioguruji
      @Audioguruji Před 4 lety

      Right bro, please click here
      👉#audioguruji ones.

  • @prabhat4096
    @prabhat4096 Před 4 lety +1

    Sirji next part bano mane brige to kiya par usme ek ic bhout heat hoti hai dusri nhi hoti or muje power bhi kam lag rhi hai
    Mane 2050 ic ka brige kiya hai or 12,0,12V 6A ka transformer lagaya hai
    Or jada volume karne par vo heat ho kar jal jati hai or jaldi banyie
    Next part

  • @ganeshnaik6469
    @ganeshnaik6469 Před 4 lety

    thank you sir

  • @suvamdas9332
    @suvamdas9332 Před 4 lety +1

    Sir next video jaldi upload kijiya please. ..

  • @ElectroHubForAmp
    @ElectroHubForAmp Před 4 lety +4

    We're waiting for next part on this video

  • @goelsahab
    @goelsahab Před 4 lety +1

    Sir, bahut hi detailing theories aap batate hai, mujhe theory wala part jyada acha lagta hai, aur kaafi learn kiya hai meine, aaj new chiz pata chali but Question bhi hai sath mera. 1. Ques - 40-0-40 at 8 Ohms load se 100W max milti hai wo per ampere (1A) ke according hai ya wo hi Max hai.
    Matlab agar hum 24-0-24 pe wo formula use karke dekhte to bas 36W milta hai to kya lekin jaise ab 2SC5200 24-0-24 5A pe 200W kehte hai to kitna milega 36W ya 36Wx5=180W at 8 Ohms load.

    • @WhatIThink
      @WhatIThink  Před 4 lety

      Speaker current tabhi draw karta hai jab transistor usko jyada volts de paye. Aapka calculation sahi hai.24.0.24 se 36 watt hi milega. That is reality.

    • @goelsahab
      @goelsahab Před 4 lety

      @@WhatIThink To sir fir amperes add karne se kya hoga aur volt*ampere wala formula galat hai kya jo salcon humesha mention karta hai?
      Also, agar aisa hai to kya sab users to galat info hai ki 24-0-24 5A k sath 5200/1943 se 200W RMS on 8 Ohms and 24-0-24 10A transformer se max 360W on 4 Ohms milega. Qki chahe 5A ho ya 10A milega to 36W was per your video.

    • @goelsahab
      @goelsahab Před 4 lety

      Also, sir kya aisa bhi kuch hai ki preamplifier se input voltage badhane se kuch hoga agar aisa hai to usme guide kar dijiye thoda...

  • @kingpklowbasslover7220

    Great vedio sir ji..

  • @ManojKumar-su2vh
    @ManojKumar-su2vh Před 4 lety

    पहले तो धन्यवाद देता हूं सर जी आप को एसी जानकारी हमारे सभी भाईयो को देने के लिए। सर जो मार्केट में कॉमन जो ऑडियो बोर्ड़ आते है,जैसे एक ही पावर सप्लाई से कम करने वाले स्टीरियो बोर्ड 2sc5200,TDA7293,2n3773,2n3055,ये सब ऑडिओ बोर्ड में प्रेक्टिकल करते करते ही थेवरी बताये तो ज्यादा समझ आएगा सर!

  • @lokeshkahar3194
    @lokeshkahar3194 Před 4 lety +1

    Thanks so much sir ☺️☺️

  • @sanjuthakur7104
    @sanjuthakur7104 Před 4 lety +5

    SMPS power supply circuit ke bare mein bataye sir class d amp ke liye

  • @sharangpatil4888
    @sharangpatil4888 Před 4 lety

    Nice information! Waiting for next part.

  • @qaisarali97
    @qaisarali97 Před 4 lety +1

    Agar ek input ko direct ya kisi resistance ke sahare ground kiya jaye to kiya sambhab hai? Ya 4044 ka jo theory hai ustarab se? Be sabri se intejar rahega coming video ka.

    • @WhatIThink
      @WhatIThink  Před 4 lety +1

      Jee bilkul easy hai ...Agla video dekhiye .

  • @ashusharmadjrepairingpoint3768

    Very nice video ..sir m bhi D.j amplifier callas H ka Ripering karta hu 99 sarsent log Brize mod pe kharab karte h amplifier Ko brize mod pe connection + - par kare

  • @technicalsona5983
    @technicalsona5983 Před 3 lety +1

    Thank you ♥️...

  • @aatamkripa6559
    @aatamkripa6559 Před 4 lety +2

    Sir ji please.. 4440 ko practical me bridge mode karke dikhaiye.

  • @reeztuscano5640
    @reeztuscano5640 Před 4 lety

    you are great teacher
    bahut badia sikhate ho aap..
    mujhe aapki vajaha se amplifiers me interest aaya hai..
    koi bhi audio project suru karne se pehele aapki video dekh ke hi karta hu suruvat
    keep doing the good work.....
    please 24 bit 192khz ka dac banane ki video banao na plezzzzz
    :) :) :)

  • @sks-rb3kp
    @sks-rb3kp Před 4 lety

    Thank u so much for your good article

  • @prakashkori8014
    @prakashkori8014 Před 4 lety

    Brilliant sir 👌

  • @Maolana_ModiG
    @Maolana_ModiG Před rokem

    Thanks

  • @basudevnanda488
    @basudevnanda488 Před 2 lety +1

    800watt amplifier make by 2n3055&2955 me kiya chunga lagake chalasakenge

  • @sanjaypal6863
    @sanjaypal6863 Před 3 lety

    You are really comedian,☺☺☺☺

  • @bharatmaske3684
    @bharatmaske3684 Před 4 lety +1

    Namaste sir aapke bataye aaydiya bohot isili hote hai jisase ham ise kar pane me sakses hote hai aisahi ek idia aapne bataya tha 4558 ic use karake gain banane ka o bilkul sakses huva

    • @WhatIThink
      @WhatIThink  Před 4 lety

      Thanks dear...Credit goes to your hard work .

  • @KiruHellsGate
    @KiruHellsGate Před 3 lety

    Awesome knowledge on sounds system.. keep going bro..

  • @bullguy112
    @bullguy112 Před 3 lety +1

    Hi Very good explanation, but unfortunately your sound vanishes in thin air, so please when editing just check the quality of your sound recording also..Thanks

  • @SKElectronics
    @SKElectronics Před 4 lety +2

    Make a video on Speaker protection circuit, how it works and it is useful to have in amplifier or not.

    • @WhatIThink
      @WhatIThink  Před 4 lety +1

      I will. It is required only in High power amplifiers or amplifier with high switch on off noise.

    • @SKElectronics
      @SKElectronics Před 4 lety

      @@WhatIThink Oh thanks for the information.

    • @rakeshpatel4561
      @rakeshpatel4561 Před 4 lety +1

      Sir lekin uss par bhi video banaiye hamare dj amp me ye bahot use hota hai...aur smooth start power supply par bhi video banaiye...🙏🙏🙏🙏

  • @vishal4720
    @vishal4720 Před 4 lety +1

    जबरदस्त वीडियो 👍, मैनें 2050 को ब्रिज किया वह काम नहीं किया, आप कर के बता दे, कागज पर ही सरकिट बनादे|🙏

  • @abiraenterprise1547
    @abiraenterprise1547 Před rokem

    🙏👍

  • @RahulKumar-js7wc
    @RahulKumar-js7wc Před 4 lety

    Sir ji jo amplifier ki Mainus to Mainus m jodni h plz y bhi batana next video m gud job sir g m apka subscriber hu or apki sari video dekhta hu 👍👍👍👌

  • @deepoo3456
    @deepoo3456 Před 4 lety +1

    Sir ye bilkul waisa hai jaise double phase electricity bina neutral ke 440 volt ka item chal jata hai

  • @karamveersingh4205
    @karamveersingh4205 Před 4 lety

    OK Sir...

  • @qaisarali97
    @qaisarali97 Před 4 lety +1

    Ye jankari ke liye jitna bhi tarif karun kam hai mai cinema amplifier,Pa amplifier ka karta thha lekin ek nasa sa rehta, jabse aapka video ka shara mil raha hai nasa badh raha hai,60 sal ki umar me bhi jawani ki josh aagaya hai, Assalam alaikum.

    • @WhatIThink
      @WhatIThink  Před 4 lety +1

      Bahut shukriya...Abhi amplifier ka kaam nahi karte hain kya ? Aap kis city se hain ?

    • @qaisarali97
      @qaisarali97 Před 4 lety

      @@WhatIThink han thoda thoda kar raha hoon mai naya naya circuits pe pasand karta hoon,aapse bahut ummed hai hum amplifier nakal kar ke banate the cinema Ka ek amplifier tha Westrex 4 3737 transistor ka 1300 seat ka cinema hal me bhi koi dikat nahi hoti thi 70 volt dc drive tha, uska jo circute tha ajtak nahi dekha half bridge tha, mai kolkata ke nadi is par Hoghly jila rehne wala,mujhe aapka batane ka aadaz bahut achha lagta bhale hi video lamba ho lekin aap Puri details dete hain, mai kai video aapka down load kar leta hoon aur bar dekhta hoon, abhi intejar me hon jo aapne kaha 4 dinon me bataonga 500 mosfet amplifier ko kaise bridge ki ja sakti hai, noti fication ka intejar me hon, josh me hoon, aapka whatsap number hota to kuchh jankari leta aur kuchh bhejta, mujhe Ahuja ka amplifier achha lagta hai uska lt negative baising hai awaz me base achha trible ya bass ghatane se Vocal change nahi jabke ekdam simple circuit hoti hai, aapki awaz piyari hai, kuchh log sirf paisa kamane ke liye adha hi batate hain aapki niyat achhi hai, Allah blessings to you and your families.

  • @dileepkumar-lg4yl
    @dileepkumar-lg4yl Před 4 lety +1

    Frist view

  • @izaztazammulislam9968
    @izaztazammulislam9968 Před 4 lety +1

    We can invert the input signal using Inverting opamp.

  • @jagmalsingh9331
    @jagmalsingh9331 Před 4 lety

    I am very satisfied with your method of teaching....and I want to know how to play with 30 0 30volt 4amp.se chalana hai. Kya karu...

  • @HimanshuGoel210588
    @HimanshuGoel210588 Před 4 lety +2

    Sir, ab kuch logics lagata rha mein usi din to kuch idea hua but study karke bhi wo section mila nahi jo mujhe apki baat se samajh aa rha hai, kya aisa hai ki V*V/2R se hum supply ki max output nikal sakte hai aur uske according jo total output derive ho sakti hai uske hisaab se P/V=I se hum Ampere check kare perfect supply ki match k liye ?
    Eg1. mujhe agar 2 channel chalana hai 8 Ohms pe 100W Max per channel derive karna hai to 40-0-40 ki 2.5A ki supply leni hogi (40+40)*2.5=200W & agar 2 channel pe 4 Ohms pe 200W Max lena hai to 40-0-40 ki 5A ki supply leni hogi (40+40)*5=400W
    Eg2. 65-0-65 at 2A for 264W Max at 8 Ohms per channel and 4A at 4 Ohms for 528W Max

    • @WhatIThink
      @WhatIThink  Před 4 lety +2

      It is correct method. But assume the efficiency of Class AB amplifier also. It is 70 to 78 percent, meaning it will give output of 78 watts only if 100 watts power supply is given. Accordingly you have to increase the amps of power supply.

    • @HimanshuGoel210588
      @HimanshuGoel210588 Před 4 lety

      @@WhatIThink Wo to aap batate ho har video me ki 1Ampere ki power extra hi use kare transformer.
      Aur iski max output on 4 Ohm 200W nahi 180W claimed hai to I think 5A transformer will work in both case. 8 Ohms and 4 Ohms. or 3A in 8 Ohms.

    • @goelsahab
      @goelsahab Před 4 lety

      @@HimanshuGoel210588 acha aisa bhi karna hota hai kya ?

  • @sabyasachimaji344
    @sabyasachimaji344 Před rokem

    I can get it by using inverter opamp in a simple way like by using 4558 or NE555 .
    One channel inverting and other non inverting input. ❤️❤️
    Yes it's a simple circuit used in simple best table board.
    So I am requesting you to make a video how to use open to get bridge mode. Thanks you ❤️❤️❤️

  • @SKElectronics
    @SKElectronics Před 4 lety +1

    Plz make the audio level same all over the video.

    • @WhatIThink
      @WhatIThink  Před 4 lety +1

      Yes there is some problem in audio level

  • @sanket4946
    @sanket4946 Před 4 lety +2

    How to bridged 7294 ic?

  • @rhythmaudioskolhapur5757
    @rhythmaudioskolhapur5757 Před 4 lety +2

    Bridge mode op _ amp circuit

  • @vivekkumarsinha9101
    @vivekkumarsinha9101 Před 4 lety +1

    Sir , agar mai ghr par use hone wala intex 2.1 home theatre ko car ke battery ke sath jod kr chalaunga toh chlega kya isse vo kharab toh nhi hoga na , home theatre ka transformer nikal kar join krunga toh chl jayega na.

    • @WhatIThink
      @WhatIThink  Před 4 lety +1

      Nahi chalega....Usko dual supply chaahiye..Car battery se sirf single supply milta hai...Ek power supply ka vide hai dekhiye, aur battery wala bhi video hai mere channel par.

  • @deepukumar1700
    @deepukumar1700 Před 4 lety +1

    Bridging ka dusra part kab Banega

  • @facttriks6170
    @facttriks6170 Před 4 lety +1

    Sir we are waiting for next part of this video plz sir bataye kb la rhe ho iska next part