Video není dostupné.
Omlouváme se.
Fixing a Lawn Mower Seat: Flex Seal VS Plastidip
Vložit
- čas přidán 12. 05. 2021
- If you need to recoat your entire lawn tractor seat, should you use Flex Seal or Plastidip? Let's test them both and see which spray works better for this application! ↘️↘️Click “SHOW MORE” below to open the full video description! ↙️↙️
⭐🌟 Watch the first riding lawn mower seat repair video here: • How I Repaired My Lawn... ⭐🌟
⠀
DISCLAIMER We participate in several affiliate programs that earn us a commission on purchases made through our links at no extra cost to you! ⠀
Some product links are affiliate links which means if you buy something we will receive a small commission. As an Amazon Associate I earn from qualifying purchases.
⠀
⠀
⭐🌟 Check out ALL the products and gear we recommend here: ⭐🌟
📦 www.amazon.com/shop/ganderflight 📦 ⠀
⠀
⭐⭐ Examples of Products Used In This Video ⭐⭐⠀
🔷 Flex Seal Spray: amzn.to/3ZnW0f3
🔷 Plastidip Spray: amzn.to/3msshDi⠀
🔷 Plastidip - Usually cheaper locally than online: www.walmart.com/ip/Plasti-Dip...
⠀
⠀
🏘️ Join Our Groups Here: ⠀
www.ganderflight.com/groups ⠀
🎁 Find Value In This Video? Buy Me A Coffee:
☕ www.ganderflight.com/coffee ☕⠀
🚐 Favorite RV Gear:
🔸GasStop Propane 100% Emergency Shut-Off: amzn.to/3ZBtN4V
🔸Beech Lane Wedge Levelers: amzn.to/3mrfBww
🔸Fastway Zip 6” Breakaway Cable: amzn.to/3SNh2kO
🔸Motion Sensor LED Night Light: amzn.to/3ZHdyCY
🔸Fastway ONESTEP Wheel Chock: amzn.to/3yhlC1e
🔸8” Clip Fan Rechargeable: amzn.to/3yiOE0t
🔸Portable White Noise Machine: amzn.to/3kK5jHe
🔸Save your back with HitchGrip: amzn.to/3YnITJw
🔸MaxxFan 12v Vent Fan: amzn.to/3YpXVyu
🔸Propane Fire Pit: amzn.to/3yhn4kc
🔸Valterra Twist On Waste Valve: amzn.to/3mld6f3
🔸Latch.It Keyless RV Door Locks: www.ganderflight.com/latchit
🔩 Learn ALL about your RV, take the RV Tech Course Home Study Course:
www.ganderflight.com/rvtechco...
⠀
📖 Read a magazine for RVer’s, by RVer’s!
RV TODAY www.ganderflight.com/RVToday
🛠️ Favorite Tools & Gear
🔸My Everyday Carry Tool - Skeletal CX: amzn.to/3ZGO0Wp
🔸The BEST disposable workgloves! amzn.to/3ZGLiQQ
🔸resqme Original Emergency Car Escape Tool: amzn.to/3ydwCwU
🔸NOCO Boost X Jump Pack: amzn.to/3JaXXpJ
🔸VIAIR 12V Air Compressor: amzn.to/3YtWlMk
🔸the BEST Tire Pressure Gauge: amzn.to/41Pkr6P
🔸The BIG Rearview Mirror: amzn.to/41JbnAt
🔸Infrared Digital Thermometer: amzn.to/3kOUCTK
📸 *Video Gear I Use: amzn.to/3IHWEx2
If you find a “dead link” please let us know! We’ll send you a sticker!
📺 Want to see more of our videos? Don’t forget to subscribe and click the bell icon 🔔 so you're notified when we release new videos!
🎥 Love Gear Reviews? - Watch More!
www.ganderflight.com/gearplay...
🧰 Want more DIY projects? Check these out!
www.ganderflight.com/diyplaylist
🏕️ Watch more RV Life Here:
www.ganderflight.com/rvlifepl...
Connect with us!
💥 All Links www.ganderflight.com/links
🎵 TikTok www.ganderflight.com/tiktok
📷 Instagram www.ganderflight.com/instagram
💻 Facebook www.ganderflight.com/facebook
©️ Gander Flight, All Rights Reserved.
This channel is for entertainment purposes only; we are not experts or professionals. We share our opinions, experiences and what works for us. Please do your own research and make your own decisions.
#flexseal #plastidip #ganderflight
Fixing a Lawn Mower Seat: Flex Seal VS Plastidip, Fixing a Riding Mower Seat - What To Use, lawn mower,lawn mower seat,lawn tractor,lawen tractor seat,seat repair,lawn mower seat repair,seat fix,lawn mower seat fix,plastidip,flex seal,flexseal,vinyl seat repair,riding mower seat fix,riding mower seat repair,garden tractor,how to,tractor seat repair,tractor seat,john deere seat repair,tractor seat cover,lawn mower repair,mower repair,how to repair vinyl seats,garden tractor restoration,lawn mower tractor,lawn mower repair videos
⭐⭐ *Examples of Products Used In This Video* ⭐⭐⠀
🔷 Flex Seal Spray: amzn.to/3ZnW0f3
🔷 Plastidip Spray: amzn.to/3msshDi⠀
🔷 Plastidip - Usually cheaper locally than online: www.walmart.com/ip/Plasti-Dip-Flexible-Protective-Rubber-Coating-Black-11oz-Spray/21015329
I bought a seat cover. Super easy and more comfortable in the hot sun.
I did as well. Awaiting delivery. Ty
Sounds good!
I had mine reupholstered by a lady that makes and repairs marine seats. Did a great job, no worries.
best I've used to so far is ZIP System Huber Flashing Tape! over 5 years on a fully covered mower seat that sits outside full time. Thanks for your testing!
I'm just sittin here blazed and saw this video and it opened up alot of doors thanks man great video 😎
👍
Interesting. I’d like to revisit this now, 2 years later. I have a repair to my John Deere seat, using dry wall reinforcing mesh and liquid Plastidip, that has held up. I used Flex Seal on some gutter joints (gutters are reclaimed leftovers from other houses) and places where I capped unwanted downspout holes with tin can lids. I found the Flex Seal became brittle after 2 or 3 years.
Watch the Liquid Plastidip seat repair here: czcams.com/video/1gqjVBprL0A/video.html
Thanks bro. Been searching the whole internet for a video like this.
Hope it gave you some ideas.
Thanks for the tip. God bless.
Thanks, I have an atv seat I want to experiment on using your video as encouragement.
Great mindset - its all an experiment! Let us know what works!
most excellent ..
That was an interesting thing. I was betting on the wrong one for the outcome. Many of the "As Seen On TV" items just seem to the same thing as other products, just pushed out there with a marketing push. You have me rethinking that now. I was glad to see there was a significant difference. ❤️👍👏 Donovan & Jodi
Just gotta watch how THICK the flex seal comes out - its real easy to get runs.
I used an old chair cushion and two bungee cords to hold it on
My Seat still looks Brand New. I used “Wipe New,” on it before I used the Tractor, and I put a Cub Cadet Cloth Seat Cover on it.
4k clear over plasti dip has given me craaazy good results
Doesn't apply to this situation, but have you tried peeling it after the clear? How did it work?
@@GanderFlight i have repaired a few new curb rashes and peeled the wrap around the area. 4k made it more difficult to peel but it still came off with just a tad more work. Its been almost a year and was one of my DIY projects to date.
Fascinating
I say this with respect. I don’t think the outcome of either warranted the work involved or money spent. I’m happy that I now have insight into theses products. Thank you!,,
That's the goal of publishing the experiment!
I park my mowers in the garage, and the seat still deteriorates. Thank you for the comparison.
Seems like mower manufacturers need to use the same materials as motorcycle seats so they'll last a bit longer
@@GanderFlight yeah. Cheap materials.
I PUT WINDSHIELD URETHANE IN THE SPLITS, SPREAD IT OUT ON THE GOOD MATERIAL. NEXT DAY USED IT. MIGHT SPRAY IT WITH UPHOLSTERY PRESERVATIVE.
Genius
Hey with this idea, i just did mine with gorilla brand rubber spray. And because of what you said at the end, yeah i took off anything that seemed slightly cracked or brittle. And i peeled back as far as the foam looked stained from water where the adhesive would likely be compromised in the future.
What i did differently and got great results, is i used ALEX painters caulk and coated all the foam first to put a nice thick layer to stop from foam holes and to raise the seat more leveled with the rest of the peeled cover. Looks better with less of a transition. But the gorilla brand is outstanding compared to plastidip that i used on my RV Spare Tire cover that didnt last 6 months and was incredibly thin. This gorilla stuff looks very thick and feels hearty.
Nice - I like the caulk addition to smooth things out!
Craftsman LT 1000 from 2003! I just replaced the two front tires today! It's our 20 year anniversary this coming spring. 😆
Nice! Sounds like you've taken care of it
1992 Poulan 17 horse OHV Intek engine.Still mowing. 30 + years. This Info. will help restore the seat.
I'm considering using truck bed spray on liner. I have a couple seats to experiment on.
Let me know your results!
Thanks for the video. I replaced the seat cover on my MC with vinyl sheets and vinyl glue which worked great. The seat was a convex shape but the mower is concave so I'm not sure how it will work.
I bet it would work ok - just take your time smoothing out the vinyl - might be a bit more nip and tuck around the edges with the mower seat shape than the motorcycle.
Thanks
Hope it was helpful!
I've made seat covers for formula cars and race bikes with professional-grade gaffers tape. It looks like matte black duct tape, but it's a different animal - better adhesive and very tough. It holds up pretty well for a year before the edges begin to lift. I never tried spraying Flex Seal over it, but that might be the ultimate. Be advised it's a lot more expensive than duct tape. A roll of the good stuff is about $30.
gaffers tape is some awesome stuff - and shouldn't leave residue if you need to remove it!
seat covers run between 18-23USD, a new seat, can cost 50 -90USD. plastidip 2 cans 23USD, flex seal around 15/can.
👍
New seat for the Win
It lightly heats up the sealer just enough to spread it out evenly throughout.,an over the entire top of the damaged seat cover. In the areas that are most needed badly and missing in spots on it to.
👍
Flax spray can u spray it in before u get to the point of cracking or keep last longer
I'm ol school, Duct Tape for the win! 😉
👍
Good video
Thanks!
jazz hands
Try using A harbor freight heat gun on the seats before about 16" to 24" away from the plastic seat cover. To soften and loosen it up first. Before spraying on the flex seal. Then as it's drying repeat that method about 18" to 24" inches away from seat and cover once more all over the entire seat cover and let cool and dry completely.
It definitely couldn't hurt - thanks for the tip!
it is
Fill holes and Re-cover with strong fake leather from JoAnn's Fabric. Works good and looks like new.
Thats a great idea!
Great video. I'll have to try the Fexseal on a future project. 🦅
Its pretty sweet - just comes out reeeeal thick so you have to be super careful with it or you'll get lots of runs.
@@GanderFlight Thanks for the tip. 👍
Has anyone tried shrink wrap? The type you use when covering a boat for winter storage. Curious as to how that would work?
I think it would absolutely work for a time - might be something you have to repeat each year. Could also be something you do two or three coats/wraps to make it overall thicker. Might make the seat TOO slippery and hard to sit on. Test it out and let us know!
Use flex paste works amazing spread with putty knife
I haven't tried that product yet, thanks for the recommendation!
Thanks for sharing. Like 1.3k!
Thank you! Cheers!
Wondering how well truck bed liner spray would work on those seats.
Would be cool to try out :)
How about a roll of vinyl and a heat gun? Should look like new after that, and very durable
Interesting idea - I'd love to give that a try someday - heavy duty shrink wrap!
Get a bucket or log to set on... 🤭 lol yea that's what my grandpa would have done really but I would go with flex seal for sure! Thanks
👍
Throw a old school metal tractor seat on it no seat covers to dk with! Or swivel bar stool seat w arm rests ..stools are always at the curb!
Yep! The old cast iron or stamped metal tractor seats will last forever.
This would be my second choice if I can't find a replacement seat at a flea market.
Sounds like a plan!
Great video. Question: If the seats are left in the hot sun, does either of the coatings soften and stick to pants?
They both were a bit tacky in the direct sun, but I never noticed any coming off on my clothing.
if you dont get fancy you can get a replacement seat for 30 bucks.seems that beats spending that much to spray over a seat that's breaking down badly. I spend 3 hrs at a time in the mower seat.
Maybe cover bad spots with gorilla tape then spray. Those seats when old get hard and brittle, so will always cause cracking.
Personally. If I'd end up with this issue. Considering how expensive these specialty airesol cans are. I think I'd be best to completely remove the plastic and foam. Buy some new foam and w.e fabric that is and make a bran new seat with the old shell.
could it be used on a dash and interior panels in a color I wonder
For that application I HIGHLY recommend Plastidip. Look up the channel Dip Your Car
Seems as if your approach in this video very closely approximates my own in these projects.
👍
I bought some " Duke's Special adhesive" from them dag blame Duke Boys in Hazard county. It's cooters recipe !
Do u know how these both hold up to sanding/abrasion?
I have not tested them against sanding.
Hey man-watched this and your other video - good job.
I see it's been a while since you put this video up - how are they holding up?
I have a very expensive Kubota seat that is not brittle, it's just torn where you enter and exit. I tried your Plastidip w/duct tape and it did not work. The Plastidip just rolls up as you get on and off and eventually you are back where you started. On the back where you did on your other video, I'm sure it would work well.
Do you think I'd have better luck with Flex Seal and spray foam? I'm curious because that Craftsman you did with Flexseal has been done in much the same locations as my problem area. You also seemed to elude to you could not get the Flexseal overspray to peel back off where you did not want it, so I think that may be a good sign.
Thanks if you have advice on that.
Hey James! Yeah, plastidip is semi permanent so it makes sense that its coming off. I no longer have that mower so I can't speak to how its holding up today - but I think flex seal would be a better choice to try. Definitely tape off what you don't want overspray on. I'd also try to "feather" the spray if you can instead of having a hard tape line -- maybe try getting a wide piece of painters tape and stick down the outside edge leaving the inside edge up and spraying that way - might achieve a "fade" at the edge and less to grab on your pants.
Well this was a true test of Flex-Seal, if that stuff can make a boat float then it shouldn't crack on a plastic seat, after all what is it called..............
Wonder if flex seal comes in John Deere yellow. Pitiful seats.
I bought a new replacement craftsman seat and it cracked after one summer of use. Junk
Ouch!
How about liquid electrical tape. Do you have a video on that?
I do not.
Might work - try it and make a video!
I tried liquid electrical tape on my damaged lawnmower seat and it peeled off after about 4 months of use.
Whoa whoa. What’s happening at 00:48 with the drill and tin can?
DIY Paint shaker : czcams.com/video/8zNDrk89R48/video.html
Flex Seal and Plastic-Dip are both latex paints in a can. In other words get a quart or gallon of good exterior grade house paint. Much cheaper and thicker material. Will outlast any junk spray on mess.
Hmmm, thats the first I've ever heard of that. Based on how I've seen Plastidip behave when removing it from my car wheels or on the DIP YOUR CAR CZcams channel I'm pretty confident its not just latex paint.
garage sale old inflatable beds work well as covers for $2 (queen size covers the whole mower i mean)
But i guess you could use the vinyl to re cover the seat too.
Interesting idea! Do you use anything to tie it down or hold in in place from wind movement?
@@GanderFlightglue /adhesive....
Do you have an opinion which one is more durable and/or flexible?
For a seat, no, as I haven't used them both enough to give that. However, I've had plastidip on my wheel rims for over 3 years and they've held up wonderfully. I've also used flex seal to repair things around the house or on the RV and it has held up as well.
@@GanderFlight Thank you 👍
Liquid tape?
i've never messed around with it - give it a try and let me know how it works out!
You can actually go to a junkyard and rig up a car seat.
Vinyl car wrap?
Not sure how well it'd adhere
@@GanderFlight Very well then. How about this?
Blue Storage & Boat Shrink Wrap - 7 mil - Farm Plastic Supply
Hot glue gun with black glue sticks lasted around a year on my poulan pro
Interesting - I would think hot glue would crack upon first use - its pretty brittle.
@@GanderFlight use automotive glue sticks that are more flexible and won't crack
I bolted in a bicycle seat free
Of Craigslist
Interesting...
Another novelty idea... get a replacement seat and use a seat cover for it when not in use, then avoid storing it out in the sun. Should prevent both cracking and torn foam.
Prevention is the best, I'd agree.
New seat would be great! $100 vs. $15 dollars. Difference of $85 towards groceries? 🤔 I will check back after I get some groceries, eat and then mow putting the flex to the test.
My craftsman was never in sun for any period of time without me sitting on seat, but being around 7 years old, just became brittle in 2 spots from age.
borealis
Those type seats are available at Surplus Center cheaper than the junk you used. Just a thought !
I'm not familiar with Surplus Center but I'd love to know more if they have tractor seats for less than $10!
Me too
I think that commenter just enjoys being contrary. Notice he had zero comeback when you asked him that rhetorical question. Clearly a replacement seat costs just a bit more than $10. 😂 you’ve made a very straightforward and extremely helpful video here. But there’s typically a negative Nelly in every group. Lol Be well!
Surplus Center has a catalog with all types of equipment with a lot of it being hydraulic pumps, fittings and hoses, also gears and bearings, just about everything you can think of. I just googled them and they have an online store with everything they carry.
Onto the seats, after a quick search I found a couple of lawnmower seats from $29.00 to $39.00 dollars, that was under two minutes. You might find something cheaper with a better search, it’s more expensive than your spray on repair but it’s also going to last more than the two months that your repair didn’t make. It will look better and probably last 2-3 years even being stored outdoors.
You should request a catalog, they’re fun to browse through, or just google them and type in what you’re looking for.
What a dumbass
surprise surprise, they are both essentially the same thing: Rubberized glue.
👍
Did wither of these rub off into your clothing at all?
In my experience, they did not.
It's really not that hard or expensive to buy some thick padded vinyl and just remove and replace the old padding.
👍
coil and regulated higheight ; enclosed opinionated
The test of a hot summer day 100 degrees ?? Probably come off on your back and butt , have to throw them clothes away
Gorilla tape?
Worth a try.
dentistay j a z z h a n d s
3 to 5 minutes tops. I'd start at 1 to 3 minutes first.
Gotcha
Just order a new seat, sheesh!
Both look like crap let's be honest. If I was really worried what people think I'd just spray the exposed foam with some black paint to make to less noticable from a distance and that would be that. If the mower was worth it I'd look for a seat either new or used and stop leaving it in the sun or cover it.
Thanks for sharing your opinion and thanks for watching.
Here’s an idea…try keeping your mowers under cover like I do in a shed when not in use so you don’t have to worry about this EVER happening?!
Another word… just get another seat
Both your seats look like crap!
👍 Thanks for you opinion.
ARE YOU BLIND ?????
No.
Why is everyone being so rude??
@@chrinamint It's a rude crazy country right now. And it's even spread dow to lawn mower seat repair dialog. Yikes! But good job Gander Flight!
So you used $30 of spray sealing stuff, and did $20 worth of work, instead of a $5 roll of duct tape, or a $20-$30 OEM seat.
Don't quit your day job 🤡
5 $ roll of duct tape 😂... might get 3 ft. At dollar general. Then the heat and on /off of machine ....= big azz sticky mess! Bet you put electrical tape on your steering wheel?
@@epmcdonald4562 you only need 1-3 feet for seat rips anyways, it's literally a $25 seat, and if you have a problem/get butthurt over sticky residue on a machine that's used outside, AND COVERERED with dirt anyways, then you are a SNOWFLAKE ❄️😺
But then obviously fixing stuff/ being a real man is something you don't excell at, you 🤡
And yes I do electrical tape my steering wheel, but only on the cars/machines I use to get to your mom's house.
Black duck tape its 5 bucks and works good looks okay to.
👍
If you want hot sticky azz tape sticking to your clothes only tape 5$ maybe dollar general....be lucky if it even sticks .... all 3 ft of it.
@epmcdonald4562 it doesn't stick to your clothes, and it works great, man, if you're smart enough to put it on right.
Shit not shut