A very good tutorial about how to use fineline crackle varnish, you mentioned that at first you didn't get the cracks, please allow me to tell you a few tricks. When you apply first step it should be at least 1.5mm thick, the thicker it is the more visible cracks you'll have, an very important thing is that if you will let first component to dry for more than 2 -3 hours it is a very good probability that the cracks won't show up anymore. As you said, as soon the object you are decorating it's going to regain the transparency you can start applying the second step, the best test is that when you cros your fingers gently on the surface and it's squeaks it is raedy. And yes I said to run your fingers gently on the surface, but only after is transparent. Another important thing is that when you apply the second component you HAVE to spread it evenly usig circular motion with your FINGER, don't worry, doing so you will only help the second component to get fixated properly on the surface, and the cracks will be more visible, also if you use a hairdryer set up on a high temperature it will help cracks to show up quickly. I used for my work an antique paste from Pentart simply applying a very small quantity on top of my finger using with circular motion on the surface, after that I use an cloth to wipe the excess off. I'm glad that you have mentioned about solvent based varnish, because if you will use an water based varnish it will ruin your work as soon as you start to apply it on the surface. Also it is recommended to finish ( apply varnish ) only after 24h. Yvette, thank you for your sharing.
Oh wow, thank you for your detailed comment! I have never dared to use my fingers on it! I’ll have to give it a go! 😄 sounds like you have a lot of experience with this product, I really appreciate you sharing your knowledge! Thank you! ❤️❤️❤️
Thanks both of you for your lessons!So useful 👏🏻👏🏻👏🏻 Let me ask-is is possibile to leave the object without solvent finish varnish?(Mine will not contact with water in tge future)Thanks again!
Very good information and as you said, it is very temperamental. I live in Panama in an area with a lot of moisture. Here is what I found. I apply component 1 and let it dry overnight. I use a water based wax from Dixie Belle to fill in the cracks. I then apply component 2 and bow dry. This is how I get the best cracks in my area.
@@lora.9208I watched a video by Pentart about the Fine Line Crackle Varnish and the subtitles said that you don't have to varnish the normal 2 Part Crackle Varnish, but you DO have to varnish over the top of the 2 Part Fine Line Crackle Varnish because it doesn't have a built-in top coat. So, just to preserve and protect your artwork, it's probably best to varnish over the top. Oh, and don't forget to use a solvent based varnish, like the one that's made by Pentart. That's what I use and it's great. Love from Amanda in Australia.
That was so interesting, Yvette! Hmm, I might need to make an order of that plaque-I love it! I love those clock ornaments, if that is what you call them(?). How thick are they compared to the plaque or the hearts? Hopefully once spring comes I will order some more of your lovely creations. Well done on your video.
Thank you! I’m glad you enjoyed it! ❤️ I thought you might like this plaque you like them birds 😄 they are click ornaments yes, I think I might have to put them on my tree next Christmas if no one buys them by then! 😬 they’re made on a 3mm base but the mouldings make the raised parts. Closer to about 1cm ☺️ well there’s no rush for you, I’m not planning on stopping any time soon and you know that I’ll be more than happy to make some custom pieces for you 🌸
Thank you so much for this tutorial. I'm in Australia and Pentart is hard to find here, but after seeing the Fineline Crackle Varnish on your channel I ordered some from the UK on ebay and have been so excited to try it! And then... the cracks didn't show up :( ...but the hairdryer trick worked and they are sooooo beautiful
Hi Julia, I wss wondering the same thing (whether it is water based or solvent based). I just bought some pentart products from Rustic River which is an Aussie company and reasonably priced.
The piece looks good, although I do think the finer cracks would be more evident, on camera at least, if you had used a darker brown paint, or an antiquing gel, or something. I also think the video thumbnail was also very misleading, because the project you showed in the video thumbnail wasn't the project you showed in the video. I actually wanted to see you make the project that was in the video thumbnail. However, you did give some good suggestions in the video about what to do if your crackle varnish doesn't crackle as it's drying, so that was probably really helpful to anyone's who's had that happen.
I am appreciative of your video and love the finer “cracks”. The finished product is very pretty. I did want to ask how you made the border on your plaque, it adds an interesting effect to it and I’d like to try it myself. I’ve never tried the gold pigment but it’s on my list to try. Thanks very much for sharing your knowledge.
Hi there it morning over here bout 12.45, I didnt think I'd be seeing your face, you are very pretty, thanking you ageing for your info in regards to what brush n where you get your serviettes.i actually email aggies n mention you had told me you buy from her, kind ee R hope that helps you.my son going out to get more items so I can do these things.im disabled n it hard for me j u st to go out g e t what I'm in need of,great vid thank you. N I am the 1st
@@IvetaZiedina you should always be happy n smile I'm not the on sky one you are teaching n helping, you are put on earth for this reason.thank you for your replies n ever so much help n advice. Looking forward to all your up comming vids , n please call me alanna
A " P.S." I also use an iron trivet on the hot tray to keep baby food jars warm and ready as needed. The plaque could rest on top of a trivet overnight with heat going on and off by thermostat.
About the need for heat. Would a counter top electric warmer work? On ebay are many with heat adjustable knob. I have one that has a thermostat that turns heat on and off to avoid overheating. Meant to keep coffee/tea pot nice and toasty all day.
Great tutorial. So glad I found your channel. I’ve been repurposing for years but only recently made a channel. Love to learn from amazing artists. Super talent. 💖
Oooo that's a good question! I can't find any information online but I think it should be fine as long as you apply it on to your clay after it's been baked so kind of as a finishing step
Hmmm...I just ordered some and then saw this. I know you said pastel doesnt work, but have you tried anything else that does work. I do t have any special pigments. I have some of the black wax you use and some micas. Also lots of other inks and things. Any ideas?
You know, I'm sure I tried my heat gun on it once and it started to melt, I'm almost positive that it happened, I cant remember what project it was on, it was before christmas so I was super busy and everything is a blur :D:D:D:D
@@IvetaZiedina I have an embossing one, which has 2 settings on it and I tend to use the low setting for paint finishes and the higher setting for resin. It's easily done - buring things, been there and done that! :) x
So here's what I managed to find - Pentart it looks like this shop on Facebook stock it but it's sold out at the moment. You could message them and ask if they will be getting it back in stock. facebook.com/pg/decoupagedesignsusa/shop/?rt=9&ref=page_shop_tab&referral_code=page_shop_tab_desktop-all_products&cid=798385093950888 With Daily Art I'm really struggling to find anything in the US. Sorry about that :(
@@IvetaZiedina Thank you so much for your reply. I finally found another brand called 2 step Craqueleur that I ordered from Royal Design Studio in the US. Looks like it will do a fine job. Thanks again.
I just purchased mine off etsy. But still have not managed to get any crackles. Very disappointed in it. Other crackle mediums work with much less hassle.
Hello,I'm not sure which coaster you're referring to but I usually just use acrylic or chalk paint and a sponge dauber for all of my edges (there are a few videos on my channel where I show how to do that specifically the one where I show how I make all of my coasters )
Hello! I usually get all of my napkins on ebay :) Facebook groups about decoupage can be a good place to find them too as a lot of people sell napkins privately
I wanted to love this stuff, as it's the only fineline crackle medium I could find. But I have ruined several projects because after putting waxing paste on it wont come off the project unless you rub it hard. Was so disappointed in this stuff.
A very good tutorial about how to use fineline crackle varnish, you mentioned that at first you didn't get the cracks, please allow me to tell you a few tricks. When you apply first step it should be at least 1.5mm thick, the thicker it is the more visible cracks you'll have, an very important thing is that if you will let first component to dry for more than 2 -3 hours it is a very good probability that the cracks won't show up anymore. As you said, as soon the object you are decorating it's going to regain the transparency you can start applying the second step, the best test is that when you cros your fingers gently on the surface and it's squeaks it is raedy. And yes I said to run your fingers gently on the surface, but only after is transparent. Another important thing is that when you apply the second component you HAVE to spread it evenly usig circular motion with your FINGER, don't worry, doing so you will only help the second component to get fixated properly on the surface, and the cracks will be more visible, also if you use a hairdryer set up on a high temperature it will help cracks to show up quickly. I used for my work an antique paste from Pentart simply applying a very small quantity on top of my finger using with circular motion on the surface, after that I use an cloth to wipe the excess off. I'm glad that you have mentioned about solvent based varnish, because if you will use an water based varnish it will ruin your work as soon as you start to apply it on the surface. Also it is recommended to finish ( apply varnish ) only after 24h. Yvette, thank you for your sharing.
Oh wow, thank you for your detailed comment! I have never dared to use my fingers on it! I’ll have to give it a go! 😄 sounds like you have a lot of experience with this product, I really appreciate you sharing your knowledge! Thank you! ❤️❤️❤️
Thanks both of you for your lessons!So useful 👏🏻👏🏻👏🏻 Let me ask-is is possibile to leave the object without solvent finish varnish?(Mine will not contact with water in tge future)Thanks again!
Very good information and as you said, it is very temperamental. I live in Panama in an area with a lot of moisture. Here is what I found. I apply component 1 and let it dry overnight. I use a water based wax from Dixie Belle to fill in the cracks. I then apply component 2 and bow dry. This is how I get the best cracks in my area.
@@lora.9208I watched a video by Pentart about the Fine Line Crackle Varnish and the subtitles said that you don't have to varnish the normal 2 Part Crackle Varnish, but you DO have to varnish over the top of the 2 Part Fine Line Crackle Varnish because it doesn't have a built-in top coat. So, just to preserve and protect your artwork, it's probably best to varnish over the top. Oh, and don't forget to use a solvent based varnish, like the one that's made by Pentart. That's what I use and it's great. Love from Amanda in Australia.
Any chance you have a tutorial?Cheers
I have never used crackle but I want to. Agree the fine lines are better effect, thank you for explaining in depth 🌸
more than welcome and I'm always happy to help!
So informative with a very gentle manner, you would make a great art teacher for children with convince problems🙏🏻
thank you so much,that's so kind of you to say that! it really means a lot!
Thank you so much for solving my crackling-problems. (Radiator) !!!
Great tutorial! Nice project and lots of good info! Thanks for sharing!
Thank you so much!
That was so interesting, Yvette! Hmm, I might need to make an order of that plaque-I love it! I love those clock ornaments, if that is what you call them(?). How thick are they compared to the plaque or the hearts? Hopefully once spring comes I will order some more of your lovely creations. Well done on your video.
Thank you! I’m glad you enjoyed it! ❤️ I thought you might like this plaque you like them birds 😄 they are click ornaments yes, I think I might have to put them on my tree next Christmas if no one buys them by then! 😬 they’re made on a 3mm base but the mouldings make the raised parts. Closer to about 1cm ☺️ well there’s no rush for you, I’m not planning on stopping any time soon and you know that I’ll be more than happy to make some custom pieces for you 🌸
Thank you so much for this tutorial. I'm in Australia and Pentart is hard to find here, but after seeing the Fineline Crackle Varnish on your channel I ordered some from the UK on ebay and have been so excited to try it! And then... the cracks didn't show up :( ...but the hairdryer trick worked and they are sooooo beautiful
Hi Julia, I wss wondering the same thing (whether it is water based or solvent based). I just bought some pentart products from Rustic River which is an Aussie company and reasonably priced.
@@angeepanjee thanks so much for letting me know! It will be great to have an Aussie source 💖
Beautiful! I can't wait to try this!
be careful as it is addictive :D you'll want to put it on everything! :D
The piece looks good, although I do think the finer cracks would be more evident, on camera at least, if you had used a darker brown paint, or an antiquing gel, or something. I also think the video thumbnail was also very misleading, because the project you showed in the video thumbnail wasn't the project you showed in the video. I actually wanted to see you make the project that was in the video thumbnail. However, you did give some good suggestions in the video about what to do if your crackle varnish doesn't crackle as it's drying, so that was probably really helpful to anyone's who's had that happen.
I am appreciative of your video and love the finer “cracks”. The finished product is very pretty. I did want to ask how you made the border on your plaque, it adds an interesting effect to it and I’d like to try it myself. I’ve never tried the gold pigment but it’s on my list to try. Thanks very much for sharing your knowledge.
Thank you! I used Pebeo contour liner in "Pearl" on the border, I'll have a video coming soon where you can see the whole process :)
Hi there it morning over here bout 12.45, I didnt think I'd be seeing your face, you are very pretty, thanking you ageing for your info in regards to what brush n where you get your serviettes.i actually email aggies n mention you had told me you buy from her, kind ee R hope that helps you.my son going out to get more items so I can do these things.im disabled n it hard for me j u st to go out g e t what I'm in need of,great vid thank you. N I am the 1st
Thank you for your kind words and I'm so happy I was able to help with something!
@@IvetaZiedina you should always be happy n smile I'm not the on sky one you are teaching n helping, you are put on earth for this reason.thank you for your replies n ever so much help n advice. Looking forward to all your up comming vids , n please call me alanna
A " P.S." I also use an iron trivet on the hot tray to keep baby food jars warm and ready as needed. The plaque could rest on top of a trivet overnight with heat going on and off by thermostat.
About the need for heat. Would a counter top electric warmer work? On ebay are many with heat adjustable knob. I have one that has a thermostat that turns heat on and off to avoid overheating. Meant to keep coffee/tea pot nice and toasty all day.
I would be worried about it damaging the wood to be honest, might be worth a try if you already have one of these :)
Sorry to ask, but I live i denemark and can’t bye Pentart solvent varnish. Can I use liquitex High gloss varnish. The bottle says: non- removable?
Great tutorial. So glad I found your channel. I’ve been repurposing for years but only recently made a channel.
Love to learn from amazing artists.
Super talent. 💖
thanks for sharing
Oooo that's a good question! I can't find any information online but I think it should be fine as long as you apply it on to your clay after it's been baked so kind of as a finishing step
Hmmm...I just ordered some and then saw this. I know you said pastel doesnt work, but have you tried anything else that does work. I do t have any special pigments. I have some of the black wax you use and some micas. Also lots of other inks and things. Any ideas?
Looks great! Have you tried a heat gun / heat embossing tool? I use one for my distressed wood effect x
You know, I'm sure I tried my heat gun on it once and it started to melt, I'm almost positive that it happened, I cant remember what project it was on, it was before christmas so I was super busy and everything is a blur :D:D:D:D
@@IvetaZiedina I have an embossing one, which has 2 settings on it and I tend to use the low setting for paint finishes and the higher setting for resin. It's easily done - buring things, been there and done that! :) x
Is it possible to put the object in the oven at 25 celsius or lower? Thanks for a great video 👌💖
Good question, you probably can I haven’t tried it tho 😄 maybe one day 😄
Браво !
I have that exact same tin as the one behind you.
Would you discuss your use of a "contour liner" to create wavy edging? Do not know what contour liner would be ?
Please see this video - czcams.com/video/sbnMX6zzdhI/video.html I talk through the whole process of making the plaque
Beautiful, love it!!! Where can I find the Pentart and Daily crackle mediums in the US? I've looked everywhere. Thanks much.
So here's what I managed to find -
Pentart it looks like this shop on Facebook stock it but it's sold out at the moment. You could message them and ask if they will be getting it back in stock. facebook.com/pg/decoupagedesignsusa/shop/?rt=9&ref=page_shop_tab&referral_code=page_shop_tab_desktop-all_products&cid=798385093950888
With Daily Art I'm really struggling to find anything in the US. Sorry about that :(
@@IvetaZiedina Thank you so much for your reply. I finally found another brand called 2 step Craqueleur that I ordered from Royal Design Studio in the US. Looks like it will do a fine job. Thanks again.
@@MyTableScraps No problem, I hope that one will do just as good! :)
I just purchased mine off etsy. But still have not managed to get any crackles. Very disappointed in it. Other crackle mediums work with much less hassle.
Does this work the same for "classic" crackle varnish?
Thank you ❤️
Do you think a heat gun would work? or would that be too much heat?
oo I do think heat gun might be a bit too much, unless you do it from very far away maybe
Hy on your coaster you have made can you show how and what you use to make the border do you use pigment ink pad or paint thank you
Hello,I'm not sure which coaster you're referring to but I usually just use acrylic or chalk paint and a sponge dauber for all of my edges (there are a few videos on my channel where I show how to do that specifically the one where I show how I make all of my coasters )
СПАСИБО!👏🏻👏🏻👏🏻👏🏻
Hello, just found your lovely channel and can't wait to try this, could you say where you find such beautiful napkins or papers? thank you so much.
Hello!
I usually get all of my napkins on ebay :) Facebook groups about decoupage can be a good place to find them too as a lot of people sell napkins privately
@@IvetaZiedina Thank you for replying to my questions your a sweetheart xx
Have you tried a UV resin?
I wanted to love this stuff, as it's the only fineline crackle medium I could find. But I have ruined several projects because after putting waxing paste on it wont come off the project unless you rub it hard. Was so disappointed in this stuff.
Why all the fancy crackle products , glue, texture, paint
what size is the mdf placque?
It's 15.4 cm :)
Hi, maybe try a heat lamp overnight
that's a good idea! I don't have one of those tho but if you do that might work really well!
Traduzione in italiano prego
Why all the fancy crackle products , glue, texture, paint