WPL B36 URAL 375D with new, scale rear bumper & lights, Ackermann steering and best RC sound
Vložit
- čas přidán 28. 08. 2024
- In this video: WPL URAL 375D upgrades:
- More flex thanks to 3D printed PETG leaf springs and silicone bushings
- Correct Ackermann steering geometry
- 3D printed scale rear lights & bumper
- Reliable WPL 2 speed transmission with metal gears, metal MG90S shifting servo & 3D printed shifting arm
- How to order pre assembled PCB for RC sound & light controller
- Test run under icy conditions
Your supplier for the pre assembled Open Source Sound & Light Controller: www.pcbway.com/
Official WPL store (affiliate link will support the channel): www.wpl-rc.com...
Virtual 3 speed transmission: • WPL B36 URAL-375D With...
Flysky support: • The Best Engine Sound ...
Revving sound, Kennwort sounds: • ESP32 Arduino RC sound...
SCANIA V8 Open Pipe: • Worlds Most Realistic ...
Light & sound controller features:
- Sampling rate up to 22’050Hz, instead of 16’000
- Multiple sounds can play simultaneously
- real DAC outputs, no R/C filter circuit required
- the variable speed engine sound can play at the same time as an additional sound with fixed speed (a horn or a siren for example)
- A lot of pre configured vehicles are available
- special sounds included like: „Martinshorn“ fire truck horn, US Police siren, Swiss post bus horn, train horn, car horn, MAN TGA truck horn
- Engine sounds for: Land Rover Defender V8, ford Mustang, Chevy Nova, Dodge Challenger, MG B GT V8, LaFerrari, Scania V8, Ural V8, Kenworth, CAT, Detroit Diesel etc.
- Air brake & jake brake sounds
- Output for vibrating motor, which simulates engine vibrations
- Vehicle inertia simulation (if crawler type ESC is connected to pin 33)
- Virtual clutch, making the engine sound much more realistic (if crawler type ESC is connected to pin 33)
- simulated manual 3 speed, automatic & double clutch transmissions
- The TAMIYA 3 speed transmission is synchronised in software and can be shifted while driving
- Many light functions like headlight, tale light, brake light, indicators, blue light, foglight, sidelights, high & low beam
- 6 PWM RC servo signal inputs
- 13 light outputs
- PWM, PPM, IBUS & SBUS communication, makes it compatible with most common remotes
- The pre assembled SMD PCB can easily be ordered according to: github.com/The...
Material links for sound controller:
- PCB including SMD components assembling: www.pcbway.com/
- ESP32 board: www.banggood.c...
- PAM8403 amplifier: www.banggood.c...
- Speaker: www.banggood.c...
My DIY Open Source Arduino Stuff:
github.com/The...
github.com/The...
github.com/The...
www.thingivers...
github.com/The...
Check out my other RC videos: • Remote control
Follow me on Twitter: / thediyguy999
on Flickr: www.flickr.com...
and on Instagram: / thediyguy999
If you want to support this channel:
/ thediyguy999
paypal.me/thed...
#TheDIYGuy999 #WPL #PCBWay
I've just ordered PCB's.. You might want to consider setting up an referral/affiliate thing with them too.. This is such an awesome project!
Thank you? Do you mean an affiliate thing on PCBWay?
@@TheDIYGuy999 yep
Your sound/light/motion controller board really makes that truck realistic!
Thank you
Awesome job!! I'm going right now to fix the front axles on mine trucks :)
Your sound controller is the best I've found, if only I could fit it into a 1/87 truck!
Thanks. I think 1/87 is impossible.
Ackermann steering is *not* dependent upon where the tie rod or the servo is located. You could put the servo at the back of the truck and control the front steering with a long linkage--it still has nothing to do with the steering geometry. Just an FYI
Loving the sound and with lockdown on its way I'm ordering one, thanks again for great content 👌
Thanks. Have fun with the build.
This is a great video. Thank you so much for all of the information you gave us. Love the sound board. I have several wpl's that I am upgrading in the future for my brand new channel. It's only 2 weeks old. Thanks for sharing 👍✌💪 nice Controlled run of your ural. Great job. Now I want mine like this lol.
Thank you. you can find all the required informations to build your own in the video description
that's a cool rig you built there :D but i wonder where you got the metal gears for the two speed transmission from?
Супер!!! Очень кропотливая работа.
Thank you!
Great cool video and truck🥰
Thank you
very cool. only for real cars, parking lights in the middle, and the signals stand separately closer to the center)
Thanks. Unfortunately, I've never seen this truck in reality, so it's a bit hard to find out according to pictures. I found, that there are a lot of different versions, they are not all the same
@@TheDIYGuy999
I say hello to you from Russia, I know how this truck and headlights look like in real life, so if you have any questions, do not hesitate)
Cool mods,great information
Thank you
idol💓💓💓💓 please let me know how to use code if sound only since i only have 3channel fsgt3b
Is there a vid, tutirial on how to load programme the module? Never used arduino befior, thanks
See: github.com/TheDIYGuy999/Rc_Engine_Sound_ESP32/blob/master/README.md
For general Arduino advice use Google search
Отличная работа. Хочу повторить. У меня ГАЗ 66. Какой регулятор вы используете в Урале?
See: czcams.com/video/nOidubEFoQ8/video.html
Чего прицеп раком стоит? На подвеску ось тяжело сделать?
Amazing work bro! I have cool idea, but i'm not good in programming. Can you send message to me?
Звук дурацкий, а вот пластиковые рессоры интересно. Лучше ли они металлических?
1st! 😄
👍