Missing Rear Brakes On Can Am Outlander
Vložit
- čas přidán 11. 09. 2024
- Parts list that I used to install brakes.
Rear Left Brake Caliper (comes with brake pads) - 705600860
Front brake line from Renegade (my installation option) - 705601693
Rear LH brake line from Renegade (optional for short wheel base models) - 705601554
COPPER WASHER 7pc. - 705601628
TORX-TRUSS Screw - 250000755
Brake Screw for brake rotor 4pc. - 235381646
Brake rotor - 705600999
I ordered everything except the brake line, I have a 23 xmr 1000 max chassis and I am confused on which brake line part number is right for me for the left rear caliper upgrade? Thank you for your help
Thats so awesome, good job
✌🏻how much was the entire build?
Around $150
I have a 2023 xmr 1000 in a max chassis. Which part number do you use for the brake line? Where do you tie into with the brake line? Is there a need for a separate right hand brake lever? Does the stock equipment have enough brake pressure to support a 4th caliper?
I want to install the same system on my 2 person max chassis 1000 xmr and am not sure which part number to use for the longer brake line. Does your part list include everything you need?
I just bought a 2023 can am renegade XMR 1000 and I've gotta say I am not impressed with the stopping power. What would you recommend I buy to correct this?
Ordered everything you said, but I have a 2019 570 without caliper mount. I'm going to make a pattern of the right side mount and reproduce one. The only tricky part is getting the bearing out and saving it for reuse, and welding the caliper mount on at a perfect 90 so the pads wear evenly on the rotor. I can buy a new control arm for $217 plus tax and shipping. From your experience, what would you do? Do I need the bleeding screw from the renegade or is there a spacer I remove where the brake line stacks on that bleeder?
If possible I would get correct control arm. On a bleeder screw need to check what fits what's not and and get parts as you go.
@@davidspowersport1867 I ordered a salvage swing arm with bearings and bushings today from Quebec Canada on eBay. I just hope the axle bearing is still good. I dont have the tool for that.
I need a parts list for a 2016 Can Am 650. for this project. Please, if you can.
It's in description box