Intro to SolidCAM Milling
Vložit
- čas přidán 4. 08. 2014
- In this video, I simply want to show you how easy it is to program with SolidCAM, simulate tool path and finally generate GCode. This video is intended only for viewing and is essentially just an introduction to SolidCAM using some of our 2.5D Milling technologies.
- Věda a technologie
Hav no ideas earlier about cad and cam and g codes but with this video it really clear all my doubts.Thank you.
Thanks man, this is the best tutorial.
thank you man it is very nice explained thank you from Mongolia
Very nicely explained! thanks
very helpful. thanks a lot!
Thank you! I did not realize that the word CAM is a verb. Therefore, CAD must now also be a verb.
I understand now. When I program part, I will first CAD the part then I will CAM the part.
Then at 12 noon, I will LUNCH my sandwich.
Man, I had a job where they called cnc programmer cammers. I was camming for living. I cam a lot.
@@sebasebusiowy 🤣🤣🤣🤣🤣🤣 a lor
Thankyou sir, the best tutorial
Hi, I am trying to simulate a machining operation and control it in real-time with PLC twincat 3, is there any way for that?
really informative video!
thanks for the information :)
Very good 👍
Sir, Thanks for this video. still I have some doubts regarding machine setting, Driver & Tool selection, can you clarify that? If yes i`ll be grateful to you
Thank you so much
thank you very much
Thanks for this tutorial. But now i have a question.
Is it possible to generate a toolpath for Pocket whitch the tool is not cutting with full diameter after pluge into the stock?
If i set cuttingspeed to 3000 mm/min the tool in my case a 8mm endmill, flyes around my head after plunge in is finished and the tool makes the first move into the full stock with 3000 mm/min.
How to setup that the tool moves in a helical toolpath from in to out without cutting the hole 8mm tooldiameter?
Thanks and have a nice day.
nice video,
Thanks 😊
Its possible to mill 3mm holes with 3mm tool? i have mach2 and the gpp files doesnt work well, it gives me error when i try to generate GCODE when use drilling operation :(
yes.....you can it.......for more details....contact me!
Hello, I noticed that the G-code has the M06 tool change before the tool # is called. How hard is it to change the post processor so the line will be posted in the correct order?
it's probably a Haas thing, not necessarily incorrect:)))
NICE
👍👍👍
I am lately started but will cover up
Thanks dear
Thank you for the video , but half of it has a low quality that can not be viewed even in 1080p
where is the depth of cut of milling profileng?
Im waiting for your video 5axis tutorial
T H A N K Y O U it's good and easy
what is the difference of solidcam to solidworks cam?
No difference
good , but you have to show how its work, eg simulation
send solid cam Download link