How to change front springs / front coil springs on OCTAVIA (1Z5) [TUTORIAL AUTODOC]
Vložit
- čas přidán 13. 07. 2024
- How to change front springs / front coil springs / front suspension springs on SKODA OCTAVIA 2 (1Z5) 1.8 Estate 2007-2013 [TUTORIAL AUTODOC]
Springs on SKODA Superb II Hatchback (3T4) (03.2008-05.2015) / SKODA Superb II Estate (3T5) (10.2009-05.2015) / SKODA Yeti (5L) (05.2009-12.2017) / VW Caddy IV Van (SAA, SAH) (05.2015-...) / VW Caddy III Van (2KA, 2KH, 2CA, 2CH) (03.2004-05.2015) cars should be replaced, as a rule, according to one and the same procedure.
However, there can be slight differences due to specific features of the vehicle design.
⚡ AUTODOC CLUB - club.autodoc.co.uk
Add your car to the AUTODOC CLUB garage and get personal recommendations on repair intervals - club.autodoc.co.uk/?to=/user/...
All video and pdf tutorials on SKODA OCTAVIA 2 parts replacement: download and watch at AUTODOC CLUB - club.autodoc.co.uk/manuals/sk...
❱❱ Install the AUTODOC CLUB App - club.onelink.me/d2X8?pid=yout...
📲 Buying via app is always cheaper than on the website!
❱❱ Install the AutoDoc App - interstitials.onelink.me/1036...
🛒 On our website you will find a wide range of auto parts you are interested in: www.autodoc.co.uk/?...
Springs: www.autodoc.co.uk/car-parts/c...
Springs for SKODA OCTAVIA 2: www.autodoc.co.uk/car-parts/c...
LIQUI MOLY Chain Spray: www.autodoc.co.uk/liqui-moly/...
WD-40 Grease Spray: www.autodoc.co.uk/wd-40/13563...
LIQUI MOLY Fast Cleaner: www.autodoc.co.uk/liqui-moly/...
🔔 Subscribe to AUTODOC's channel and don't miss new videos on car parts replacement ➜ czcams.com/users/AutodocUk?s...
0:00 - SKODA OCTAVIA 2 - springs: step-by-step replacement tutorial
1:32 - Raise the front of the car and secure on supports.
3:19 - Unscrew the fastener connecting the drive shaft to the wheel hub.
5:36 - Install the spring on the shock absorber.
7:28 - Fix the shock absorber strut on the steering knuckle.
9:34 - Tighten the bolt connecting the drive shaft to the wheel hub.
11:02 - Tighten the upper fastener of the shock absorber strut mount.
Was this video helpful? Give it a thumbs-up and share it with your friends!
Have a look at other videos on our channel:
► SKODA car repair tutorial - • SKODA car repair tutor...
► SKODA OCTAVIA 2 car repair tutorial - • SKODA OCTAVIA 2 car re...
► How to replace air filter on OCTAVIA (1Z5) - • How to change air filt...
► How to replace spark plug on OCTAVIA (1Z5) - • How to change spark pl...
Mobile shop: m.autodoc.co.uk
📢 AUTODOC on social media:
Facebook: / autodoc.co.uk
Twitter: / autodoc_berlin
CZcams: / autodocuk
Instagram: / autodoc_autoparts
TikTok: / autodoc.eu
Snapchat: / autodoc.uk
#autodoc #autodoctutorial #autodoctips
Disclaimer:
This video is intended for informational purposes only and does not guarantee achievement of a specific result.
It is recommended that you entrust the installation to highly skilled technicians to ensure the best result.
This video is intended for informational purposes only and does not guarantee achievement of a specific result. It is recommended that you entrust the installation to highly skilled technicians to ensure the best result. This video only contains tips and recommendations that could be helpful when carrying out car repairs or replacing parts. AUTODOC is not liable for any harm, injury or property damage incurred while carrying out repairs or replacements that are a result of incorrect use or misinterpretation of the provided information. The user is personally liable for incorrect use of repair equipment, tools, or car parts, in particular when this use poses the risk of injury. AUTODOC strongly recommends taking appropriate safety precautions when carrying out any repair or replacement. Keep in mind that low-quality auto parts may not provide the appropriate level of road safety.
© 2020 AUTODOC GmbH All rights reserved - Auta a dopravní prostředky
![How to change front brake caliper on OCTAVIA (1Z5) [TUTORIAL AUTODOC]](http://i.ytimg.com/vi/f9nGljc0D0E/mqdefault.jpg)
⚠ Attention! The mistake was made in the video at 9:36 minutes. The tightening torque is 200 Nm, not 141 Nm. We are sorry for the inconvenience.
Great video
Brilliant video well presented,clear, well lit. All I need now is a hydraulic hoist and a comprehensive toolkit
Thank you for your comment! We are glad that our video was useful for you.
I did this procedure today and if you have this skoda chances that bolts will be rusty are very high. get yourself good penetration fluid, spray all bolts couple of days prior to changing them. Also get yourself wire bush on drill or grinder and clean threads well, you will thank me later.
Thanks for the clarification. We are sure that your comment will be useful to many of our viewers.
Conveniently they do the side without needing to remove wiper :)
You don't need to do 1/2 of that, just lever the lower wishbone down, complete with hub carrier etc and you can get it out of the strut, just. (open the hub carrier up with a cold chisel using it as a wedge, far better than we see in the video. Push it slightly rearwards and you can drop the strut out forwards.
Thank you for your valuable clarification, your feedback is very important for us to understand how to demonstrate in more detail our new videos.
Saw this (taking the strut out of the complete hub carrier) done in Micks Garage video for Toyota
That was what I was thinking, watching this before servicing my friend's car. I sure will try it first. 👍👍👍👍
#54 and #55 should swap places in the CC, the brake line is fastened first.
Hi, is the spring compressor in video available for purchase? Is there a link please?
Unfortunately, the one used in the video is currently not for sale, as an alternative, we can offer to consider NE00156 ENERGY
LOL, I missed the upper fastener for the stabilizer bar link at first. Maybe you should have the promo for more videos not covering the important view of the actual video, or stop the video and do the promo, and then continue. Just a tip/friendly request.
Removing strut top #21 & H7. Refitting #22 & H6. Which is it please?
In the old and new shock absorbers, due to the difference in manufacturers, the mounting dimensions differ. A video on replacing the shock absorber you can watch on our youtube channel.
@5:36 Is it the spring compressor tool that also completely refurbishes the shock absorber assy automagically between takes? 😁😁
...and hey Presto! new brake disc, pads and even caliper too, just like that😁😁
I know they prob take the opportunity to do several videos with one service event, just making some friendly fun😁
does it matter which way up/down for spring?
It is not possible to answer your question unambiguously; you can find this information in the technical documentation for repairing your car.
Video represents how to change spring in ideal world, unfortunately reality is different, shock absorber will not come out from the support block, you will need to hammer it hardly, so recommend to plan about 1-2 hours of joy for replacement of 1 spring. How ever video is helpful
We cannot show all the nuances and problems when replacing, this is all individual and it is not always possible to solve them at home.
To avoid this, we always recommend that replacements be made at specialized services.