I have found it helpful to keep a notebook where I write down the best speed/power settings for different materials and projects I'm working on. Its not necessary to always use high power settings, and for some materials a slower speed and lower power setting produces a better image. There is also a place in the output tab where you can make it do multiple passes which is great to prevent excessive burning or melting. Just use lower power and multiple passes. For cutting thin plywood multiple lower power passes can produce a cleaner cut with less charring and smoke marks.
Chad the reason why you have to mirror the design because your Datum/Base Point (look on arrow at upper right corner), it should be on the left upper corner with horizontal arrow pointing to the right and vertical arrow pointing to down.
Chad, the two laser settings are for 2 lasers. If you a 50w laser and you add a second 50w laser then you can have a 100w laser but off course your machine has to accommodate for this. I just bought a RayJet 300 and am still working the kinks out myself.
Chad, if you decide to do more videos like this, check out the free CamStudio screen capture software. You can capture all of your desktop right to video and then edit it right into your final video. I have been using it for years on my company CZcams page. Works great and you can't beat free. :)
You have Laser 1 and Laser 2 :) That program is made for a laser engraver that had both PLASMA and CO2 functions at the same time. I`m using that program since 2009 with a plasma/co2 laser engraver (worth about 17.000 euros) Hope that helps
This man right here has amazing training videos for this SarbarMultimedia his videos are so helpful he goes into some great detail RDWorks Learning Lab
Also if you put an exhaust fan on the end of the 4" hose coming out of the machine and vent it outside it pull that smoke out and port it to the great outdoors.
chad good video i have the same machine i think your problem is your table in the software is setup wrong hence the reason you mirror your text for it to engrave the right way if you go up to the config system settings click mirror y axis un tick x axis mirror on the right side of that you will see laser head position think there is about 9click the top left position and try that on a test piece this will set your table on the program to match the laser table don't forget to change the area to 500x300 i have done alot of glass engraving using the rotary it's easy done but at the same time you have to be cautious of your power what i do is put a large rubber band on the rim of the glass this gives it more grip on the rollers because of the backlash the glass will tend to slip past your starting point if you need to re engrave it wont be in the same position my speed and power settings for glass engraving on drinking glasses is speed 60 power max 30 and the focal length 22mm if you use to much power your glass will crack if you need more info and a picture of my settings feel free to email me at usagi_13@hotmail.com
Chad: At around the 10:40 mark you made mention of the image (Frame) not being clear. I learned that most of these Chinese laser machines, and probably the American ones as well, will not work well with bitmap images and that one must convert images into vector files (Mathematical Mapping) before applying them on to a project. I bought one of these Chinese laser machines just recently, and I have not had the chance to fire it up due to learning that the laser machine only works with CorelDraw, actually the plug-in (USB thumb drive) called CoreLaser will only work with CorelDraw. So as soon as I can fork out another $500.00 for the CorelDraw suites I will get to play with mine. The interface of my 60 Watt Laser Machine is much different from yours though, mine looks more simple and doesn't have as many buttons/options as yours has on it. Also, I have read from other sources that you can work on your art projects with the Adobe products, and then transfer them on to what ever program the laser machine uses. One interesting thing that I read while doing research on these laser machines is this, CorelDraw (Canadian product) seems to be the vector based drawing suit that most laser machines use worldwide. But here in America it seems that Adobe (American product) became the standard for its machines. Now that we are capable of buying a bit more easier overseas products, we are starting to see that most laser printers worldwide support CorelDraw. Thanks for posting Chad.
The dots could be used for cutting thicker materials that the laser cannot handle. Trace the dot pattern on your 3/4 plywood, and finish the job with a jigsaw...
A lot has changed since this was made. The inversion problem and the scan, dot, etc is opposite. I really need the screen on the machine to read English, otherwise I need to hook up to a computer all the time which isn't practical. The USB flash drive input made is much better.
Chad, laserworkV6 -- i have been using this software for a while. For guys still having the Mirror and flipping issues..go to config, system settings, under general settings - Axis mirror, check for y -axis or x - axis or both
You have to flip because in China they read from right to left. If you reverse the x axis motor directions it will work right. I had to do this with a small laser that used Benbox, also a Chinese laser and program.
Hi first of all your video was excellent compared to some people who just waffle on here trying to explain things,anyway, anyway I downloaded the Laser work V6 software but I can't get it to connect to my laser I have a 2000mw 20x17 ? do you have any clues of how I can do this, I am using windows 10, many thanks.
I like your video. It's raw information just like I would see it unboxing a new product the first time. BTW, your Laser 1 min max is probably going to be for grey scale etching. It's a guess. The question I have for you is do you think the Chinese etcher is worth the cost?
Chad, great information. Thank you for taking the time to post up this information. I am glad we found you. Do you have any information about obtaining spare parts, software or manuals? We have the same machine, but it was a bit damaged when it arrived. The seller is of little help. They do not speak English and my Chinese is non existent. We have been able to get some engraving complete using an old version of Coral Draw, but have had learning curve limits due to missing information. One thing that we have learned. We cover the wood with blue painters tape before cutting. This limits the "over burn" to the areas outside the engravings and cuts. This helps when we want to add color to the engraved areas. We can spray paint the color before we remove the tape. This works well for to make black letters on signage for example. Have you had errors when engraving? Many times during the process we will get an error that stops the machine. My best guess is it is an out of range error, but I am not sure. If I realign the start point of the laser, it will change when the error comes in, but I am not really sure if this is a software or hardware issue. As I mentioned, the machine was damaged and may need calibration. Hence the reason we are looking for a manual to obtain base settings. Another error we see has to do with "slop", but I am not sure what that term may mean. Thanks again for posting and any help you can provide Dave
I appreciate you showing this. I am looking to purchase one of these and this definitely helps. Does it need a special attachment to do pens? I notice some of them come with a rotary attachment but I'm not sure that would work for pens. Thanks.
Hey Chad, Thank you for this video it was very clear! I'm also using that software but I just been installing it and the connection between the laser and the computer doesn't seems to work. Did you just press on start and it send to the laser?
loved your videos, just got our machine and they really helped.....one question, how do you changed the control panel on the machine to English? You are right, the manual is pretty much useless. Thanks, Barbara
By any chance does your laser cutter has/had a oil/chemical like smell/odor to it? or just any smell in general (I don't mean when your cutting, but just in general as soon as you opened it?)
I can't seem to get the English version of the software. The seller gave me this link but I choose English bu all I get is Chinese. Here is the link I was given.
Hey Chad.. I bought a $4,000. Laser Etching Machine... I done the promo sample and it worked wonderful on marble... I was trying to do a picture and saved it as BMP.. I couldn't open the file on the flashcard - plus i used the ubs and no luck there.. what is the format? or can you show how to set and run video? Thanks Beau
I have a Hooly Heli HL-640 laser I am trying to get up and running. Could you potentially help me out on what software I need for the computer as it did not come with one.
Mr Chad, thanks for the videos. I bought a machine but it keep saying "communication error" I know you said you had to contact them. For help! I did but no answer! Is your link a universal link that can work on any machine? Any help is appreciated!Thanks!
Chad, I am looking to purchase a laser to use in my shop. Can you advise who you purchased yours from and now that you have had it a while hows it doing. Thanks, Kenny Norman,,,
where did you order your laser from ? If you dont mind me asking. I am going to order one . was thinking about amazon? worried ebay I would get scammed.
Would the adobe illustrator work with other program to send... for laser Machine software and how to deep cut as any depth meter ??? what program is that ?
Hi chad I have the same laser only the control board broke after a year... i have bought a new one but am having no luck getting it set up... is there any chance you could go into vendor settings the password is rd8888 and then save out your settings I can then load that file and mine should hopefully work... thanks Tom
help help helpive got the laserDWR3 how do I use the rotary for this machine Im really struggling here,any help would really be appreciatedregards carl
Hi Chad, I'm having a spot of bother with my China laser machine. Software and drivers are installed, but I keep getting 'communication error' when I try and test. I have uninstalled and reinstalled a couple of times, but still no joy. I'm using Laserworks v8. Any suggestions please?
hai Chad, i have bought the same machine directly from China and i am still struggling to figure it out. Like you said the software is not very helpful at all as most of it is in chinese. I hv got to the point were i pretty much have set it up but i am struggling on engraving image on Granite. Can you help me on that please?
Can u help.me set up my machine I bought one directly from china also I don't know where to star katrinah1970@gmail.com or 9106445630 we can help each other
I just set up a 500mw Chinese laser engraver just finished putting it together correctly I hope because zero instructions. Now where in the hell do I get software I bought brand new computer with windows 10 someone please contact me
Hi Chad - I understand that you had some hassles with your machine needing a code. I've got my software running now but before I got the PC plugged I was messing about printing the default.rld file on the machine and then I got the message "Board Encrypted. Contact Provider" :-( Is this the problem you had? All the buttons still work and the pulse button will fire a laser dot thru 1/8 acrylic but I can't get the thing to take a new file from a USB thumb drive or the PC. Any help would be appreciated. I tried contacting Ruida Technology - who made our machines - and no help has been forthcoming. If anybody else has hit this wall - let me know how you sorted it out! ! !
+Paul Lavin I have the same error code and can't for the life of me figure what is wrong. I've reset everything and reprogramed the entire file again. Did you ever figure out how to fix this?
+arwa khoury My sympathies but I have a possible solution. Not elegant but I'm using the machine now. You need use two codes RD8888 and CC8888 in the RDworks bundled application. You use the first in the File > Vendor settings. When you open that with the first you will get a two panel dialogue box. One is called history... you need to clear history and use the second code to unlock the clearing function... then it should work. You may have to use it again and again and again every time you boot the machine or the software but, hey, it works. I have been using the USB drive in my dedicated laser laptop. I wonder if there is something in trying to plug it directly into the machine? Perhaps the codes are in the USB drive? If this is unclear, let me know and I will do it with the programme running in front of me. Best of luck!
here is why.. drive.google.com/file/d/0BxHqHwzFuU-LNlZJN1NzMkpJRUk/view?usp=sharingy you have to mirror the image, i set mines up to work correctly with this settin
+Tony Henry Hi Tony, where did you buy the machine from? Am considering buying one via ebay straight from china but a little nervous about it. Thank you. Lauren :-)
+MIKE DELUCIA I'm interested in the same thing. Have you now done some work with the rotary attachment, and if so, can you recommend this laser cutter and related rotary attachment for etching glass?
I realize this thread is about a year old, but I just purchased (well purchased it a month ago but just RECEIVED) a "100watt", 700x500 mm machine from LaserCheap (Reci) on Ebay. Apart from a few minor glitches it works great. However I can't find this menu to "flip" the output. I still have to mirror the image for output and it can get a little confusing when I'm working with an image combined with text on the rotary attachment. Talk about a compound headache! The software is AutoLaser. Any thoughts?
I have found it helpful to keep a notebook where I write down the best speed/power settings for different materials and projects I'm working on. Its not necessary to always use high power settings, and for some materials a slower speed and lower power setting produces a better image. There is also a place in the output tab where you can make it do multiple passes which is great to prevent excessive burning or melting. Just use lower power and multiple passes. For cutting thin plywood multiple lower power passes can produce a cleaner cut with less charring and smoke marks.
engraving backwards is very nice on acrylic because it hides the rough part and the light glows more nicely this way
Chad the reason why you have to mirror the design because your Datum/Base Point (look on arrow at upper right corner), it should be on the left upper corner with horizontal arrow pointing to the right and vertical arrow pointing to down.
Chad, the two laser settings are for 2 lasers. If you a 50w laser and you add a second 50w laser then you can have a 100w laser but off course your machine has to accommodate for this. I just bought a RayJet 300 and am still working the kinks out myself.
Chad, if you decide to do more videos like this, check out the free CamStudio screen capture software. You can capture all of your desktop right to video and then edit it right into your final video. I have been using it for years on my company CZcams page. Works great and you can't beat free. :)
Thanks Jason I will definitly check it out
Glad to see you back and active, Chad. Is the new shop keeping you swamped?
I liked you pointed the camera to the screen. It's like I'm sitting there listening
You have Laser 1 and Laser 2 :) That program is made for a laser engraver that had both PLASMA and CO2 functions at the same time. I`m using that program since 2009 with a plasma/co2 laser engraver (worth about 17.000 euros) Hope that helps
Stefan Gabriela hey can you help
This man right here has amazing training videos for this
SarbarMultimedia his videos
are so helpful he goes into some great detail
RDWorks Learning Lab
czcams.com/video/YvrMeUUzaBo/video.html
Also if you put an exhaust fan on the end of the 4" hose coming out of the machine and vent it outside it pull that smoke out and port it to the great outdoors.
chad good video i have the same machine i think your problem is your table in the software is setup wrong hence the reason you mirror your text for it to engrave the right way if you go up to the config system settings click mirror y axis un tick x axis mirror on the right side of that you will see laser head position think there is about 9click the top left position and try that on a test piece this will set your table on the program to match the laser table don't forget to change the area to 500x300 i have done alot of glass engraving using the rotary it's easy done but at the same time you have to be cautious of your power what i do is put a large rubber band on the rim of the glass this gives it more grip on the rollers because of the backlash the glass will tend to slip past your starting point if you need to re engrave it wont be in the same position my speed and power settings for glass engraving on drinking glasses is speed 60 power max 30 and the focal length 22mm if you use to much power your glass will crack if you need more info and a picture of my settings feel free to email me at usagi_13@hotmail.com
Chad: At around the 10:40 mark you made mention of the image (Frame) not being clear. I learned that most of these Chinese laser machines, and probably the American ones as well, will not work well with bitmap images and that one must convert images into vector files (Mathematical Mapping) before applying them on to a project. I bought one of these Chinese laser machines just recently, and I have not had the chance to fire it up due to learning that the laser machine only works with CorelDraw, actually the plug-in (USB thumb drive) called CoreLaser will only work with CorelDraw. So as soon as I can fork out another $500.00 for the CorelDraw suites I will get to play with mine. The interface of my 60 Watt Laser Machine is much different from yours though, mine looks more simple and doesn't have as many buttons/options as yours has on it.
Also, I have read from other sources that you can work on your art projects with the Adobe products, and then transfer them on to what ever program the laser machine uses.
One interesting thing that I read while doing research on these laser machines is this, CorelDraw (Canadian product) seems to be the vector based drawing suit that most laser machines use worldwide. But here in America it seems that Adobe (American product) became the standard for its machines. Now that we are capable of buying a bit more easier overseas products, we are starting to see that most laser printers worldwide support CorelDraw.
Thanks for posting Chad.
The dots could be used for cutting thicker materials that the laser cannot handle. Trace the dot pattern on your 3/4 plywood, and finish the job with a jigsaw...
A lot has changed since this was made. The inversion problem and the scan, dot, etc is opposite. I really need the screen on the machine to read English, otherwise I need to hook up to a computer all the time which isn't practical. The USB flash drive input made is much better.
Chad, laserworkV6 -- i have been using this software for a while. For guys still having the Mirror and flipping issues..go to config, system settings, under general settings - Axis mirror, check for y -axis or x - axis or both
This video is a huge help.
You have to flip because in China they read from right to left. If you reverse the x axis motor directions it will work right. I had to do this with a small laser that used Benbox, also a Chinese laser and program.
The dots are probably beneficial in creating fold lines in thin stock.
I think the dot mode is for pictures, to simulate gray mode.
Chad you can put exact measurement of your project... You can find it above left side..
Hi first of all your video was excellent compared to some people who just waffle on here trying to explain things,anyway, anyway I downloaded the Laser work V6 software but I can't get it to connect to my laser I have a 2000mw 20x17 ? do you have any clues of how I can do this, I am using windows 10, many thanks.
Chad can you do a video on engraving cups
Can I get the name of the seller you got your laser from? From what I've seen it has the best controls. Thanks for the great video.
My USB for scan-disk wont work. any ideas?
I like your video. It's raw information just like I would see it unboxing a new product the first time. BTW, your Laser 1 min max is probably going to be for grey scale etching. It's a guess. The question I have for you is do you think the Chinese etcher is worth the cost?
Chad, great information. Thank you for taking the time to post up this information. I am glad we found you.
Do you have any information about obtaining spare parts, software or manuals? We have the same machine, but it was a bit damaged when it arrived. The seller is of little help. They do not speak English and my Chinese is non existent.
We have been able to get some engraving complete using an old version of Coral Draw, but have had learning curve limits due to missing information.
One thing that we have learned. We cover the wood with blue painters tape before cutting. This limits the "over burn" to the areas outside the engravings and cuts. This helps when we want to add color to the engraved areas. We can spray paint the color before we remove the tape. This works well for to make black letters on signage for example.
Have you had errors when engraving? Many times during the process we will get an error that stops the machine. My best guess is it is an out of range error, but I am not sure. If I realign the start point of the laser, it will change when the error comes in, but I am not really sure if this is a software or hardware issue. As I mentioned, the machine was damaged and may need calibration. Hence the reason we are looking for a manual to obtain base settings. Another error we see has to do with "slop", but I am not sure what that term may mean.
Thanks again for posting and any help you can provide
Dave
hey I can't get my software to work it keeps saying communication error please help
I appreciate you showing this. I am looking to purchase one of these and this definitely helps. Does it need a special attachment to do pens? I notice some of them come with a rotary attachment but I'm not sure that would work for pens. Thanks.
I find it to be a constant learning process!
what is the link for the software they gave you and do you know if that software will work on the smaller 40w model
thanks
Hey Chad, Thank you for this video it was very clear! I'm also using that software but I just been installing it and the connection between the laser and the computer doesn't seems to work. Did you just press on start and it send to the laser?
hey Scott have you done any glass with the rotary attachment yet? ive tried but still havent gotten it to work correctly.
I'm guessing the dot is to perforate stuff perhaps paper? idk
Hi Chad - great info. Just wondered if you have managed to engrave on metal using this laser?
many Thanks
Esther
hey buddy any idea how to find a vender settings for this machine mines messed up 500x300 bedsize mines reading 1000x1000
loved your videos, just got our machine and they really helped.....one question, how do you changed the control panel on the machine to English? You are right, the manual is pretty much useless. Thanks, Barbara
Hi Chad are you able to post a link to the software or add to may be google drive
By any chance does your laser cutter has/had a oil/chemical like smell/odor to it? or just any smell in general (I don't mean when your cutting, but just in general as soon as you opened it?)
Hi, is it possible to bring in black and white pictures for engraving? I'm thinking of doing it for a project for my wife's school?
what sort of materials can this machine cut
Do you have to use the program from China? Or is there other options that i can get my hands on quicker?
Hi Chad when I put my acrylic into the machine it won't fix I'm using 12 x 12 acrylic how do I put it into the machine
Thanks for the info chad, have you tried using it with a pen yet?
I can't seem to get the English version of the software. The seller gave me this link but I choose English bu all I get is Chinese. Here is the link I was given.
Hey Chad.. I bought a $4,000. Laser Etching Machine... I done the promo sample and it worked wonderful on marble... I was trying to do a picture and saved it as BMP.. I couldn't open the file on the flashcard - plus i used the ubs and no luck there.. what is the format? or can you show how to set and run video? Thanks Beau
Is there a better software you can use for a benbox controller? Benbox software interface is real small and not that good.
thank you you are very helpful👍🏽
I have a Hooly Heli HL-640 laser I am trying to get up and running. Could you potentially help me out on what software I need for the computer as it did not come with one.
Just like to ask how do I download laser work software to my MacBook, thank you Chad your very helpful.
Mr Chad, thanks for the videos. I bought a machine but it keep saying "communication error" I know you said you had to contact them. For help! I did but no answer! Is your link a universal link that can work on any machine? Any help is appreciated!Thanks!
Chad, I am looking to purchase a laser to use in my shop. Can you advise who you purchased yours from and now that you have had it a while hows it doing. Thanks, Kenny Norman,,,
Chad do you have idea on how to import from corel draw directly, I have been trying to figure this out for weeks. Thanks
where did you order your laser from ? If you dont mind me asking. I am going to order one . was thinking about amazon? worried ebay I would get scammed.
just purchased 50 w laser of ebay and what do you know the soft wares corrupt rdworks 8 any download sites avalable. tom
Hello I have laser draw 3 I can't get to cut large how to I get to cut big please help itself nowhere in the cut part to enlarge the image
Would the adobe illustrator work with other program to send... for laser Machine software and how to deep cut as any depth meter ??? what program is that ?
Hi chad I have the same laser only the control board broke after a year... i have bought a new one but am having no luck getting it set up... is there any chance you could go into vendor settings the password is rd8888 and then save out your settings I can then load that file and mine should hopefully work... thanks Tom
Can you give me a link to where you bought this laser.
Hi
Please tell me can you adjust the speed and laser power from the Software and the laser keypad?
Thanks
Will this laser engrave steel or aluminum?
no
stone glass wood plexi cardboard etc no metal
Plus.....get the engraving speed at max :) Regarding you`r video. It will engrave 100% the same on the "wood" you ware engraving
help help helpive got the laserDWR3 how do I use the rotary for this machine Im really struggling here,any help would really be appreciatedregards carl
What LAser? from who? what power/wattage?
i do have co2 china made i bought from ebay i donot know how i do vine giass
Hi Chad, I'm having a spot of bother with my China laser machine. Software and drivers are installed, but I keep getting 'communication error' when I try and test. I have uninstalled and reinstalled a couple of times, but still no joy. I'm using Laserworks v8. Any suggestions please?
Steve Crofts dude when you open the software lower right corner u will see device click port setting then pit it on device usb
hai Chad, i have bought the same machine directly from China and i am still struggling to figure it out. Like you said the software is not very helpful at all as most of it is in chinese. I hv got to the point were i pretty much have set it up but i am struggling on engraving image on Granite. Can you help me on that please?
Can u help.me set up my machine I bought one directly from china also I don't know where to star katrinah1970@gmail.com or 9106445630 we can help each other
I just set up a 500mw Chinese laser engraver just finished putting it together correctly I hope because zero instructions. Now where in the hell do I get software I bought brand new computer with windows 10 someone please contact me
Hi Chad do you mind sharing the software thanks
Mine does not have the cut or dot in the processing mode, I only have scan. I figure it may be a setting some where, any ideas? . thanks
Figured it out. depends on what format I imported...
I finally gotten pass communication error now it's saying is processing or pause
import files in this program is only scan, how I can cut?
Can you do metal frames for guns
can this cut vinyl records?
Looks like its for a fiber laser
Anyone know the maximum reliable cutting depth a a chine ebay 100 watt co2 laser through clear acrylic?
Does it software work on window10?
Graphics ≠ Realism
HOW MUCH WAS IT
What software is that? Thank you!
I mean, do you have a download link for that? My cnc came with a software called LiteFire - that doesn't work properly on Win7
Hi Chad - I understand that you had some hassles with your machine needing a code. I've got my software running now but before I got the PC plugged I was messing about printing the default.rld file on the machine and then I got the message "Board Encrypted. Contact Provider" :-( Is this the problem you had?
All the buttons still work and the pulse button will fire a laser dot thru 1/8 acrylic but I can't get the thing to take a new file from a USB thumb drive or the PC.
Any help would be appreciated. I tried contacting Ruida Technology - who made our machines - and no help has been forthcoming. If anybody else has hit this wall - let me know how you sorted it out! ! !
+Paul Lavin I have the same error code and can't for the life of me figure what is wrong. I've reset everything and reprogramed the entire file again.
Did you ever figure out how to fix this?
+arwa khoury My sympathies but I have a possible solution. Not elegant but I'm using the machine now.
You need use two codes RD8888 and CC8888 in the RDworks bundled application. You use the first in the File > Vendor settings. When you open that with the first you will get a two panel dialogue box. One is called history... you need to clear history and use the second code to unlock the clearing function... then it should work. You may have to use it again and again and again every time you boot the machine or the software but, hey, it works.
I have been using the USB drive in my dedicated laser laptop. I wonder if there is something in trying to plug it directly into the machine? Perhaps the codes are in the USB drive?
If this is unclear, let me know and I will do it with the programme running in front of me.
Best of luck!
Thank you I figured that out finding a page on google. I am all set and up and running back to normal!
schimmel
hii any one can make for me two rubber stamp i will pay im from india
here is why..
drive.google.com/file/d/0BxHqHwzFuU-LNlZJN1NzMkpJRUk/view?usp=sharingy you have to mirror the image, i set mines up to work correctly with this settin
Thanks Mike, I will get it flipped now.
Chad Schimmel have you done anything with the rotary attachment, if you have time call me 803-370-9666
+Tony Henry Hi Tony, where did you buy the machine from? Am considering buying one via ebay straight from china but a little nervous about it. Thank you. Lauren :-)
+MIKE DELUCIA I'm interested in the same thing. Have you now done some work with the rotary attachment, and if so, can you recommend this laser cutter and related rotary attachment for etching glass?
I realize this thread is about a year old, but I just purchased (well purchased it a month ago but just RECEIVED) a "100watt", 700x500 mm machine from LaserCheap (Reci) on Ebay. Apart from a few minor glitches it works great. However I can't find this menu to "flip" the output. I still have to mirror the image for output and it can get a little confusing when I'm working with an image combined with text on the rotary attachment. Talk about a compound headache! The software is AutoLaser. Any thoughts?
too much talk...just do it
Can I get the name of the seller you got your laser from? From what I've seen it has the best controls. Thanks for the great video.