22 SHOT FX Dreamline Sticking Magazine Fix / Damaged Pellets / Modification
Vložit
- čas přidán 8. 08. 2021
- SORRY FOR ANY ADVERTS.. I HAVE NO CONTRIOL OVER ADVERTS AND EARN NO MONEY.
This video explains the in built problems with this magazine and the fixes required to rectify.
Contact me on jerry.irwin@homecall.co.uk if you require a modified new cover or any questions..
Please see EXTRA added video called :
'Part 2 of 22 SHOT FX Dreamline Magazine'
The new cover IS now available in SIX different colours,.....
BLUE, GREY, BLACK, GREEN, RED and ORANGE..
I can post to anywhere in the world but cost is more outside of UK.. Thanks for watching.. - Sport
Brilliant absolutely brilliant
I made the mistake of leaving my mag loaded for more than a year before using it again and the spring tension was non existent. Had to open mine up to give it tension but the video helped none the less thank you
Very useful video with all tips and tricks to assemble an FX dreamline/wildcat/streamline/crown magazine ! I was able to repair my magazine following this steps, congratulations and thank you.! this video is a mandatory for Fx owners, well done!
My .22 Mag Dreamline was jamming and misfeeding since it fell apart in use, Luckily no parts were lost. I found your video really helpful in the taking apart and puting it back together again as it had as i suspected grit between the rotor and body causing it to jam. Not a very good design these mags considering it is supposed to be a quality rifle. I am deeply grateful for the clear helpful video, many thanks. Alan
Quality product, does exactly as it's supposed to and finished off nicely. No burrs or sharp edges. Highly recommend them. Cheers Jerry 👍
your welcome..
Awesome video, thank you for the information
Your Welcome..
Brilliant! an answer to an annoying problem, Have just emailed you to purchase one.
Fantastic video thankyou
Please send me your email i will order 2 cheers
@@davidstead4290 Hi David, Email is.... jerry.irwin@homecall.co.uk
So how do you order the plate
hi do you still have mag modification for a fx crown m2
Jerry ,great design you've made, I'm having the same problem with my fx maverick which I bought about 1 month ago , how do I contact you to buy 1 of your magazine plate covers ?
JUST DROP ME AN EMAIL:
jerry.irwin@homecall.co.uk
Jerry
I have a fx wc mk3 22 cal...had to break it down yesterday to get the mag out...not happy it's brand new and hardly shot it...do you make these for the 22 cal fx wildcat? Thanks
Hi Darren,
Sorry ,only for the .177 / 22 shot... However.... it may fit as fx may have used same base moulding for .22 cal.
does your cover look similar ?
Drop me email to discuss ?
Hi Daren I have had to do the same to get my FX Dreamline mag out when it came undone while in the rifle and jammed. Its a real pain as I had to remove the sight to get at the barrel release screws then reasemble and re-zero.
Hi Jerry, would these work with the .22 18 shot magazines?
I'm not sure...drop me an email to discuss ? jerry.irwin@homecall.co.uk
I'm now told that they will fit on the .22 magazine...
Have a m3 impact do you do covers for them
Sorry, only do for the 22 shot magazine.
not sure if this magazine fits impact ?
Hi any advice on how to stop the nut on Dreamline magazine from undoing in use. If I tighten the nut too much the mag jams solid if you leave it just so the mag cycles down as it should when loading the pellets the nut uncrews and falls out from the bottom and with it you risk loosing the little ball bearings and springs. I had thought of a tad of locktight but then getting the mag apart for maintainence stops that idea.
hI,
There should be a small o ring between the nut and the body, acts like a washer ...
@@JERRYIRWIN41 Yes and that is in place, still the wretched thing undoes itself
@@alansmith9080 OK. The silver large headed screw when inserted into the 'cam' black piece.
This should rotate very freely and the small boss of the screw should just protrude out the bottom.
The boss that stick out bottom should , when screwed into the magazine stop the screw from clamping the 'cam'
Just check these two parts on there own before screwing into the main body.
@@JERRYIRWIN41 Sorry to be a pain, not sure what you mean here. as you say there is the black cam piece with the notches to hodls the pellets, through this goes a silver screw / bar as shown in your video with the Allen key notch to tighten. Underneath is the threaded bar part of the screw over which goes the o ring with the little nut then going on to be tightened to hold all together is that correct which then when screwed down is flat with the base. or have I lost a bit when it undid in use.
@@alansmith9080 Hi Alan,
I have put up on utube a short video showing in more detail the screw and ;cam' it can be seen herer : czcams.com/video/uQyIIFHYVdg/video.html
let me know how you get on
Jerry
Sent you an email Jerry