Antique Manual BenchGrinder - Restoration - Workshop DC
Vložit
- čas přidán 11. 12. 2021
- #Restoration #WorkshopDC #ASMR #BenchGrinder
Antique Manual BenchGrinder Restoration - Workshop DC
Hello guys, how are you doing?
In this video i show you how to restore a antique manual bench grinder.
This tool was used to sharpen knifes, axes and etc.
I unfortunately don't know the brand that make this grinder and how many years this tool have.
I found the grinder in a scrap yard.
To begin the restoration i remove the first the screw that hold in the bench, then i disassemble the other parts with a plier, screwdriver and other tools.
The inside of the grinder was in a good condition but there was a lot old grease.
I washed all parts with a strong degreaser which makes the old paint melts and leave the surface.
After that i put all the parts in a vinegar bath for 1 day.
There was some cast imperfections so i smooth them with a file.
With a benchbrinder i brushwire all the parts, shine brish will be the finish of some parts.
Used rust converter on grinder surface.
I made new covers because the old ones had broken parts.
So I painted it with 2 coats of primer and 2 coats of vintage green.
I also restored the old washers that hold the stone.
The crank and wooden handle were missing so I made new ones.
I also put some wax on the wood handle.
Now everything is ready to assemble.
I put a lot of grase inside of the grinder to make it work more smooth.
I bought a new stone and put it on it to test.
The final result was pretty good for me.
What do you think?
Please leave a like if liked the video, and if you don't, thanks for watching.
Protection Equipments:
- Gloves;
- Goggles;
- Hearing Protection;
- Mask;
Products Used:
- Degreaser;
- Vinegar;
- Primer;
- Penetrating Oil;
- Spray Primer;
- Spray Vintage green;
Equipmentis used:
- BenchGrinder;
- BenchDriil;
- Plier;
- Wrenchs;
- Screwdriver;
- Wood Lathe;
Thanks for watching!
And if you notice some english mistake please tell me in the comments, english is not my main language.
I'm trying my best to make a better content for you, so don't forget to subscribe, comment, share, like and hit the bell notifications, it helps me a lot!
If you want to help the channel with any value, please make a Pix with this key - workshopdcdiy@gmail.com
My Instagram - / workshopdcof
My Facebook - / workshopdcof
![Mesmerizing 1930s Artillery Sprinkler [Restoration]](http://i.ytimg.com/vi/NVgXvGDgq4Y/mqdefault.jpg)
![Mesmerizing 1930s Artillery Sprinkler [Restoration]](/img/tr.png)
Hello Guys! Please don't forget to Subscribe and leave a like the video if you like it.
And if you don't, Thanks for Watching!
With Love - DC! ❤️
Joli ! Mais moi j'aurai mis du joint sur les couvercles que tu as fait , et c'est la couleur d'origine ? ( désolé mais moi elle me fait "mal aux yeux"!)😁
Ну какая-же это мельница?-, это ручной наждачный гриндер!-, тем не менее -, работа проделана большая, молодец ретромастер!-, пора приобретать пескоструйный шкаф для более качественной реставрации!-, здоровья тебе и удачи во всём!-, новых творческих успехов и хорошего настроения 👍👍👍🤓🛠️⚙️🔩🔗🦾🤝🇷🇺👈🤝!!!
Needs a bigger grinding stone, the original likely was a sandstone block that was almost touching the table surface. Still have a single gear stage one around, with the original stone in it as well, which was used by my father for years. Should pull it out and dress the stone up, it has been well used over the decades. Pack up the space between the shaft and the stone with kraft paper strips, to keep it running true, there should be almost no gap, though newspaper works well there as a substitute.
Yep, the only Stone that I find with the tiny hole on center was this one, so I used this one. Thanks for comment Sean! ❤️
If I walked into the kitchen and you had that clamped on my counter top.... Well you'd know about it! If there is a Mrs Workshop - DC I really hope that she doesn't see this video! 😁🧡
Well that's the only table that the grinder fits.😂😂😂
Thanks Deena! ❤️
Really? I wouldn’t have a problem with it, then again, I would have also been involved in the restoration.
Love the outcome love your wood turning skills brilliant out great video to watch brilliant craftsmanship
Thanks Gaynor! ❤
Great video. 👍 Bridgeport paints there industrial mills, one coat primer, two coats paint and three coats clear coat. Need bigger grinding wheel. Great project. You saved a great machine for the future.
Nice to know that! Thanks Loyd! ❤️
Grease everywhere! 😄 nice job my friend, looks great! 👌🏻👍🏼👍🏼
A lot of grease hehe'
Thanks Dr. Hut! ❤
I am wondering why you put grease on the parts,when there are oil holes on it??
Cause its better to the Grinder work. Thanks for comment!
TOP!
Nice project 👍 I wasn't sure about that colour but once it was back to gether it looks amazing. Great job
That's the original color, my câmera show It like blue but It is a vintage green.
Thanks Mate! ❤️
Very nice 👍
Thanks Sven! ❤️
Looks new again and you did a wonderful job restoring it as well!!!!
Enjoyed the video and I gave it a Thumbs Up
Thank you so much Oneshot! ❤️
Great job bro 👍👍👍👍👍👍
Thanks! ❤️
Great work on the grinder. Good choice of color . looks like it will last another 70 yrs. Before your grandkids redo it again. 😂 enjoyed video 👍 👍 👍
That is the original color, it will last some good time now hehe'
Thanks Brent! ❤
Nice job well done.
Thank Mate! ❤️
Ficou incrível. Parabéns 👏👏👏
Muito obrigado Marcello!❤️
Vida útil a peça...excelente restauração!🙏❤️
Muito obrigado Enéas! ❤️
good work
Thanks Halim! ❤️
Bom trabalho. 👍👍👍 Obrigado por compartilhar
Muito obrigado! ❤️
Ficou bom hein, da pra durar mais um século 👍👍👍👏👏👏🇧🇷
Muito obrigado Tarcílio! ❤️
Parabéns!
Muito obrigado Wagner! ❤️
Please use captions to explain the stages.
You can find the infomations about the stages in the description ❤️
Hope grease doesn’t leak out without a gasket or seal of some sort.
Show Adm. Muito bom... De qual cidade é?
Muito obrigado! Sou do interior de São Paulo.
👏👏👏👏👏👏
👍😊
If my wife saw me grinding away like that in the kitchen. I wouldn't be here to make this comment.
🤣🤣🤣🤣🤣
That's the only table that It fits. Thanks for comment! ❤️
didn't you get any trouble from "Mutti"? sharpening a rusty chisel in the good kitchen? oh well 🤯🪵🤕🤪
The only table that It fits was in the kitchen hehe'! Thanks for Watching! ❤️