Video není dostupné.
Omlouváme se.
Model railroad build video series, Part II: track wiring for DCC
Vložit
- čas přidán 14. 08. 2024
- This is part two of a five-part video series of building a model railroad from start to finish. This video series is intended to be a tutorial on various techniques. Part two demonstrates track wiring for DCC. It also shows the first steps in track weathering.
Part one: laying track and roadbed
Part three: installing DCC components
Part four: installing Tortoise switch machines and wiring of LED control panel
Part five: installing signals; finishing work; JMRI and LokProgrammer
Disclaimer: This video series is for entertainment purposes only. The creator is not responsible for any issues or situations which develop by replicating the techniques demonstrated. Please consult any program manuals for proper installation and conduct adequate research on building a model railroad before proceeding.
Great instructional videos! I'm just getting started and I'm designing my work bench with a multi-track test and program deck like you made here. I was thinking of putting a double pole switch on the section of track I am going to use for programing. In one position it will be wired for programming, the other would be for regular DCC operation. I'll have that section of track isolated. Thoughts? Am I on the right 'track'? See what I did there? lol. My wife doesn't think I"m funny either. Thanks for sharing - quite the project 🤠
Hi Steve - Yes, I think you can get away with putting a double pole switch for your programming track as long as (as you have stated) it is electrically isolated.
At 21:05 it looks like the feeder wire pulled away from the rail. You may want to edit the video for future viewers. Thank you for doing these tutorials, they are excellent for new modelers or even a regular modeler looking to learn new techniques or soldering.