✅ The Best No Drilling DIY Kayak Trolling Motor Mount
Vložit
- čas přidán 4. 06. 2024
- How I made a DIY trolling mount for my kayak. Also, how I put state boat registration numbers on my kayak permanently.
I added a DIY trolling motor mount to my Lifetime Teton 116 Angler Pro kayak /Yukon 116 kayak. This motor mount can be modified to fit almost any Kayak with built-in rod holders.
Dogs are driving me Crazy...omg
Lol
Lol
Cool design! I've been thinking of putting a trolling motor on my kayak as well. Same kayak as yours
I use the motor in lakes and ponds. I paddle the river because they are shallow and rocky. Thanks for watching. You’ll love the motor.
very simple and easy. Thanks!
You’re welcome. Thanks for watching.
Cool design. Thanks
Clean and simple
My first time Kayaking and this Kayak held strong. czcams.com/users/postUgkx4k5UrhC3v_Y4hIEaXLGvHcN5a5aBmZNB The water got pretty rough as a speed boat zipped by me, and the Kayak withstood it (I expected to be capsized). The Ores are very easy to put together, the pump worked beautifully. the seats are a bit hard to sit in after a while (I recommend sitting on the floor). after reading the reviews I was very scared it'd get a hole in it, the material is very strong and durable. The Air valve may need a small Phillips head screwdriver to adjust, other than that, it's well worth the money!(update)I've gone Kayaking in 3 Lakes and 2 rivers totaling about 40 miles. the kayak had two holes and they patched easily and no other problems can't wait for kayaking season this year!
Very smart design !!!
Thanks, and thanks for watching.
I like it. Wanna do this for the grandsons kayak.
Thank you and thanks for watching
Saved , Thank You I like your Ideas
Thanks and thanks for watching.
Great idea
Instead of using all them spacers, just find a warped 2x4. Great idea that I plan to use. Thanks!
Lol. Thanks for watching
Thanks, great video!
Thanks and thank you for watching
That’s awesome good job !!
Thanks and thanks for watching.
Great instructional video. BTW looks like you are enjoying retirement life as well. I've been retired since 2011, like you, enjoy fishing from kayak in both ocean and lake. Anyway, what was the length of the bolt you used to construct your motor mount? I'll be getting a Newport Vessel 36lb trolling motor. Thanks again for putting this on CZcams.
Thanks for watching. I used 5 inch bolts. I only used the length because I used spacers between the pvc pipe and the board to make the board set level. Some kayaks there is no need for spacers, so shorter bolts will work.
Thank you for sharing
Thank you and thanks for watching.
Thanks for the video it's been very helpful, I'm sixteen stone and was concerned about balance of kayak trolling setup however after watching I will give it a go, so I thank you, what make is your battery if you don't mind.
Frankie.
It’s called Power Queen. A budget battery I got from Amazon. It’s still going strong. Thanks for watching.
Thanks for this
You’re welcome and thanks for watching.
Thank you
Thank you for watching.
whats your thoughts on making the 2x4 longer so it'll hang over on the other side, and use a second trolling motor?
You will have to rig something like pvc pipe connected to both motors. So when you steer one the other moves in sync. Probably have to get a bigger battery. You might be on to something. It would probably turn tighter.
Nice video!
Thank you and thanks for watching
very good design
Thank you and thanks for watching.
Great video this will save me 200.00
I glad you like the video. It’s always good to save a couple hundred bucks. Thanks for watching.
Nice job
Thank you. Thanks for watching.
Very helpful, thank you.
Thank you and thanks for watching.
It was the best setup I’d found, period! I knew that I had most everything I needed to construct it in my garage. I was about to cut the video short and head out there when I heard you mention that you had to register your kayak in your state. I live in Illinois where everything short of driftwood has to be registered so I went online and checked. No surprise here, yes, if I installed a trolling motor I would have to register my kayak, number it and pay yearly fees. CRAP! I may need to think this over a little while. lol
Thanks again and I repeat, you found an excellent solution to the mounting bracket problem.
Thank you,
Wes
I’m glad you like it. In my state if you put a trolling motor on an inner tube it has to be registered and pay a yearly tax.
By the way, how do you like that little Watersnater trolling motor? If I do opt to give it a whirl that was the one I’m eyeing.
Great Mod ⭐️⭐️⭐️⭐️⭐️
Thanks and thanks for watching.
Just curious, what is the length you cut the 2x4 too?
Honestly I don’t remember. I put the PVC pipe into the rod holders and laid the 2x4 across them and marked the board a little longer than I thought I needed. Then when I mounted the motor to the 2x4 I cut off the excess leaving a few inches past the clamp mount on the motor. Thanks for watching.
I have the same exact kayak and used the water snake with the kayak mount and put it in the same place you did but I had problems it not turning good at all. How’s your working for you?
It doesn’t turn to the right as well as I like. After some practice it gets better. I added a diy rudder to the Watersnake it helps with the turning some. As guess I’ve gotten used to it now.
gracias y gracias por ver.
I added a plastic rudder to my Watersnake it works much better but still not prefect. I’m happy with it. I did a video on how I added a rudder to my motor.
Many thanx for your video. This weekend i hope to finish the building it like yours! Keep you posted!
@markwichmann7604 Glad to help. Thanks for watching. Yes, let me know how it turns out. I’m still using mine. This will be the 3 rd summer. It’s still working out great. Good luck.
What length of 2x4 did you do?
I just bought a 4 foot long 2x4. I installed the 2x4 to the PVC pipe and attached my motor and made a line about 2 inches longer. I also marked where to cut my PVC pipe even with the edge of the 2x4. So, I didn’t even measure anything.
This is awesome! I have the same kayak & have been wanting to do this. So much more water to cover. Is there a way to purchase this setup without the trolling motor of course? Venmo? CashApp?
Sorry. I’m old school. No apps. It’s easy and inexpensive to build.
nice birds
Lol
Dam smart design. Totally agree on youtube anti 2a B.S...
Thank you and thanks for watching.
How did it do out in the water sir?
It does great on the water. Better than I thought it would. I don’t run the trolling motor in the rivers around here. They are shallow and full of rocks. The paddles do best for rivers. Motor does great in ponds and lakes.
Do you have a list of parts by any chance? I’m trying to do the same thing with my kayak
Best I can remember 1 4ft 2x4 board. 6ft piece of 1 inch PVC pipe. 4 bolts 5/8 inch by 5 inch long. 5/8 washers and nuts. Two 5/8 plastic quick detach knobs from lowe’s. 1 can black spray paint. 2 eye hooks. I used over size nuts as spacers I already had. That’s about it.
@@HotLeadretired thanks!
I believe those are the 5/16 I was just looking at the 5/8 and it's way too big lol
Lol. Yeah, you’re right
Is that actual rod holders you used on the board? Do you remember the size of the pipe?
Yes, it’s actual rod holders I bought at Walmart 3 bucks apiece. I just drilled a hole through them and mounted with wood screws. If you’re talking about the pipe I used for bushings to level up the rod holders I’m not sure. I think 3/4” but they only need big enough to go over the wood screws. Btw the rod holders work great. Tip. Mount them close to the outside edge of your kayak it will make it easy to reach around and grab and replace while on the water. Thanks for watching.
@@HotLeadretired , yes, I was talking about the pipes that go in the rod holders on the kayak. I almost bought them things a few minutes ago but they don’t look like they’ll fit in the rod holders on my kayak. Thanks for responding😊
Oh, they are 1 inch pvc pipe. They fit a little lose. 1.25” fit to tightly. Later on I added rubber bands to the end of the pipe. I just wrapped a few (4-5 ) rubber bands around the end of the pipe that goes in the rod holder. It tightens them up and really works great. I improved upon my mods as the need arises.
@@HotLeadretired SWEET THANKS!
No problem. Anytime.
All is is your back sorry to say
Anybody really wanting the easiest trolling motor mount ..just clamp it to the side behind the seat and go. Works on 90% of all kayaks. Won't Crack it , won't hurt it , takes 5 seconds to do and have been doing so for years .try it before you build something.
czcams.com/video/ROR_eTuQO9I/video.html. The biggest problem mounting it with the optional kayak mount is the motor rotation when you turn it on. The one point of contact is not strong enough with the plastic brackets in my opinion. Watch this video. This was the reason I made my own, it’s much sturdier.
Nice work. I have two questions. How's retirement treating you? And, still able to use obamacare? I'm approaching retirement and will probably have to take the same route you did.
Retirement is great. I love it. I still have Obamacare, since 2014, and it has actually dropped in price. $105.00 a month. Mainly because my son dropped off because of his age and he has employer insurance. So it’s just me now. So, I’m 58 years old now. I’ve been retired 8 years as of March 1, 2022. I have 7 years till I can get social security and Medicare. I think Obamacare will still be around.
Can you share the link to the battery or name and model please?
ipowerqueen.com/products/power-queen-12-8v-50ah-lifepo4-battery-with-14-6v-10a-lifepo4-battery-charger
Thanks for watching.
Video volume to low can't hear it then volume goes totally out
It would be nice to see what your actually doing instead of covering it
Yeah. I was thinking of making a new update video with a list of materials and explain exactly how I did everything.
8m45s / 8:45 into the video is the most helpful drop of info! :| czcams.com/video/dMd0-7YYTn0/video.html Truthfully tho, very helpful video. Thanks!
Thanks. Thanks for watching.
I put my motor on backwards and didn’t want you to know I was so stupid that I made up all kinds of self righteous excuses to make it good
Lol. That’s funny. Thanks for watching. Enjoy your kayak.
@@HotLeadretired lol I enjoyed your video and thanks for all the good tips
You’re welcome. Hopefully I’ll be putting up some kayaking videos soon.
Voice to low . Hard to hear
I’m going to do a remake.
How to stop it from going in circles
Well, after you get used to it, it isn’t that hard. If you mean going in circles while drifting just lift the motor out of the water. Adding a rudder help me out a lot. It just took me some time to get used to turning it. After that it runs great.
When I turn my trolling motor on it goes circles how do I keep it driving straight
Is yours mounted at the center of your kayak? If it is it needs to be more toward the rear, sitting behind you. If it’s mounted behind you just make small steering adjustments on low speed. It will go straight you just have to make little adjustments until you find the spot it goes straight.
Have mine mounted in the rod holder like yours
I don’t really know what to tell you. Mine has never gone in circles. If I turn too sharply it gets a little tipping. So I don’t make sharp turns anymore. I say just practice with it on making slow wide turns.
not bad, but you need to not cover up your work with your arms and shoulders during much of your presentation.
True
You guys I swear ! You put your motor on backwards and so are 50%of everybody else out here , how can you get the splinter out of your brother’s eye when you have a board in your face !
I don't like this method as it throws off the balance of the kayak
Not really. That motor only weighs about 5 pounds.
@@HotLeadretired I had a 30lb thrust and when you try and turn it does
Yeah, that’s true it will. I slow my down if I do tight turns.
Did the mounting part come with the motor? If so what kind of motor is this?
The motor comes with a standard mount. That’s what I bought. Or you could get the kayak mount for a little more money. I watch the reviews of the kayak mount it wasn’t what I needed for my set up.