How to Make a Custom T-Shirt Using HTV and Laser: DIY Tutorial
Vložit
- čas přidán 20. 08. 2024
- How to Make a Custom T-Shirt Using HTV and Laser: DIY Tutorial
Welcome to Maker Experiment!
Join Trevor as he explores the world of making and DIY projects. From custom t-shirts to laser machining and more, this channel is a hub of creativity and hands-on learning. Get inspired, learn new techniques, and unleash your inner maker with Maker Experiment!
In today's video, Trevor from the Maker Experiment is showcasing the process of making custom t-shirts. I begins by discussing his previous video on laser machining vinyl and introduces the heat transfer vinyl (HTV) I'll be using. Trevor mentions that he received the vinyl samples and shirts from Scizor North America. The required materials for the process include HTV, a laser or cutter, and a heat press or iron. Trevor emphasizes that laser owners can use their laser machines instead of buying a separate vinyl cutting machine.
I explains that I will demonstrate two methods: vector cutting and laser engraving. For the vector cutting method, Trevor chooses a stitch design and shows the mirrored design file. I emphasizes not to use copyrighted designs for commercial purposes. Trevor also showcases a dragon design that would be time-consuming to weed manually, so i plans to laser engrave it instead.
Trevor mentions that I'll be using blue glitter vinyl and holographic vinyl for the two different shirt designs. I discusses the importance of using a sticky mat to secure the vinyl during laser machining, demonstrating how to lay it down properly.
This week I am making my own custom t-shirts! This is always a fun process and lets me create some awesome apparel for my family.
(May contain affiliate links)
● SUPPLIES USED
T-shirts: amzn.to/3MtiIz8
Heat Press Nation for Heat Press and HTV
rb.gy/uy17k
Specific Heat Press Link: rb.gy/e5z03
Siser HTV: rb.gy/8ir74
Enduramark Mat (SAVE 10% Code: MakerMAT10)
enduramark.com...
● FREE LASER COMMUNITY
lasersmadesimp...
● LASERS MADE SIMPLE MEMBERSHIP
lasersmadesimp...
● LOGOJET UVx40R PLUS - UV Printer
www.logojet.co...
● EPILOG FUSION EDGE
epiloglaser.co...
● FILM GEAR USED
Polarizer for cutting through glass glare - amzn.to/3a5PaCC
Sigma 24-70mm - amzn.to/2Mq3ZYs
Canon 80D - amzn.to/2YhgtEF
Thank you for watching, and we'll see you in the next video!
Note: Remember to customize the [Experiment Name], [Maker Experiment], and add any other relevant details to make the description more personalized to your video.
📣 Please tell us, what do you think of this video?
==============================================
👉 Subscribe to our channel. And press the bell🔔 icon.
------------------------------------------------------------------------------
⏰ Video Duration: 22:42
................................................................................................
⌚ SCHEDULE:
⌚ New Video Every week ⌚
👉 Don't forget to tell us your opinion in the comments below.
Thank you for supporting "Maker Experiment" You can follow me on the Social Media
Social links:
❤CZcams Channel: / makerexperiment
❤Facebook: / makerexperiment
❤ Instagram: / makerexperi. .
❤Patreon: / makerexperiment
❤Pinterest: / makerexperi. .
❤Website: makerexperimen...
❤TikTok: / makerexperime. .
❤Lasers Made Simple: lasersmadesimp...
--------------------------------------------------------------------------
📺 Watch my previous videos 📺
🎬 Quick and Easy Gift Idea For Teachers!
• Quick and Easy Gi...
🎬What is a Vector File?
• What is a Vector ...
🎬 How to do Print and Cut with Registration Dots and a Laser
• How to do Print a...
🎬 Laser Cutting Intricate Paper Designs
• Laser Cutting Int...
----------------------------------------------------------------------------
📧 For Business Inquiries 📧
amakerexperiment@gmail.com
⚠️ "DISCLAIMER:⚠️
This Channel DOES NOT Promote or encourage Any illegal activities, all contents provided by This Channel are meant for EDUCATION and DIGITAL TECHNOLOGY only. ⚠️
⭐ Thanks a lot for watching this video⭐
🖤🖤🖤 LIKE, SUBSCRIBE, RECEIVE NOTIFICATIONS, AND SHARE🖤🖤🖤
#heattransfervinyl #htv #vinylcrafting #vinyiprojects #heatpress #customtshirt #diytshirts #laserengraving #lasercutting #laserengravedhtv #lasercutvinyl #htviutorial #heatpresstutorial #lasertutorial #diytutorial #customshirttutorial #makerexperiment #experiment #cricuthtv #cricutprojects #diyvinyl #vinylart #craftingwithVinyl #vinylcreativity #tshirtdesign #tshirtinspiration #LaserCrafting #diycrafts #craftyprojects - Jak na to + styl
● SUPPLIES USED
T-shirts: amzn.to/3MtiIz8
Heat Press Nation for Heat Press and HTV
rb.gy/uy17k
Specific Heat Press Link: rb.gy/e5z03
Siser HTV: rb.gy/8ir74
Enduramark Mat (SAVE 10% Code: MakerMAT10)
enduramark.com/collections/engravable-plastics/products/enduramark-sticky-mat
The best thing to do is a bit of both. Engrave the intricate pieces and use cut lines to weed the easy large parts. You mentioned cutting a box on the dragon design, you could have done the engrave you did, add and cut the box and a quick weed of the excess around the sides. I use my laser to etch small graphics for samples on hats and small chest pocket prints, its great for samples and one offs but not something to use in high production. Great video.
That’s a very good point. I’ll have to try that next time.
Have to say that your presentation style is one which should be used as a standard for even many of the “big” guys making presentations. Nicely edited and none of the hyperbole so common in other videos.
I appreciate it! Thanks for watching.
Thank you for the settings! Since yours is 60 that is a good starting point for ours.
You’re welcome!
I love the dragon. Thank you. For HTV, do not wash using fabric softener, and turn tee shirt inside out and it will last a lot longer. Most HTV is easier to get off the mat by flipping the whole thing over on a table and remove the mat from the vinyl (vinyl flat on a table) Great video. I subscribed.
Thank you for the tips and for subscribing!
Have been using the glitter and the holographic vinyl but cut with my cutter. Just got a sticky mat and when I get the nerve will try it on the laser. Thanks Trevor.
I can’t wait to see what you come up with.
I have done this with HTV to a screen printing screen for screen printing small batches.
I’ve never thought of that.
Thanks for this video. Been wanting to cut vinyl on my laser and haven't had any luck finding a good video. This is what I needed to see. Can't wait to give it a try. Thanks again
Just make sure it’s laser safe.
@@MakerExperiment I get most of my vinyl from Stahl's and had them send the SDS for that material. Thanks again for all your informative videos
Thanks for showing this, yeah, NO WAY I'd want to weed out the dragon.
1. The initial 3-5 second press is to get the moisture out of the garment so the HTV sticks best. Yes, it also irons it flat too!
2. To make weeding easier, turn on your heat press, press the to heat platen to the empty bottom platen for about 5-8 seconds, then place your HTV with the carrier side down and allow the HTV to warm up a bit, then weeding will be easier. OR you can spend hundreds of dollars for a warming table 🤪
3. Heat Press Nation (HPN) sells quality heat presses (unlike Amazon). To check your Heat press for temperature accuracy, HPN sells temperature test strips to for heat presses.
4. HTV - the matte side is the heat activated glue, so once you burn through the glue any HTV left there *should NOT stick... meaning you may not have to burn as deep as you did on the dragon! I suggest to run a test pattern with HTV varying your laser settings, then pressing to see what's necessary to just burn the glue off (which may be different depending on the specific HTV you're using, Easy weed vs glitter vs StripFlockPro vs Holo vs the NEW PUFF metallics etc.! Not to mention using other brands)
Thanks for making this video. I found out a number of months ago that this could be done. I’ve had limited time to test my HTV and when I had, my laser was blowing right through the carrier. 🤷🏻♂️ Much more testing needs to be done but I’m almost certain that my 130w laser may be too powerful for this application. Time will tell! I may make a video as well if I can get it right!
My guess is you’ll have to run it at really lower power and fast speeds.
*Looks like a fun project!* _Now I just need a heat press..._ 🤪
You can also use an iron.
@@MakerExperiment Good idea!
awesome 🙌🙌🙌
Thank you.
Hi, thanks for the great tutorial. The sticky mat looks great, but it's a little pricey. I have shared access to a laser, and trying to keep the budget close to the HTV and t-shirt costs. What would you recommend as a lower cost alternative? Would taping down to an acrylic sheet work reasonably well?
If you’re going to be doing a lot of t-shirts, you may want to just use a vinyl cutter as you won’t be as limited on types of vinyl. If it’s few and far between, you can tape it to the bed or possibly even use magnets.
@@MakerExperiment thanks! Just five shirts for now, so I'll give those a shot!
@dcuccia best of luck!
I have a 40 watt epilog laser and when I did 20 speed 2 power and 500 frequency, it cut through the transfer layer too making it impossible to weed. What do you recommend?
There’s a couple things you can try. You can try lowering the power to 1. You can speed the machine up to maybe 25-30. Frequency I probably wouldn’t mess with yet. Every machine is a little different.
Thanks for sharing, it was really great video I'm concerned if a 10w sculpfun s9🤭 may work well on the vinyls for same idea as you did.
And what about the dragon print? Did it wear off after running it on machine wash?
So far it’s held up. Part of the issue was I didn’t wait for it to cool down before I peeled it. I didn’t read instructions 😂. I’m sure your 10w machine can get through it. Engraving may take a long time.
@@MakerExperiment thanks alot😎✌✌
Thank you for making this video. As always very well done.
I’m interested in a heat press and I was curious what press do you have. Unfortunately the link doesn’t work, at least not for me ☹️ Safari doesn’t open it. Can you please repost the links for the heat press and Siser HTV?
That’s weird because it worked for me. Here’s the affiliate link to Heat Press Nation.
shareasale.com/r.cfm?b=1137072&u=2671558&m=77504&urllink=&afftrack=
The specific vinyl is called Siser Glitter HTV and Siser Holographic HTV.
The heat press is the HPN Signature PRO 15" x 15" Auto-Open Heat Press with SurePressure.
They look good and it is great you can do this. But you can't make money with this because it is time intensive and the method is too sensitive to problems imo. Excellent video and I enjoy your content
I’ve seen people make money doing this. I don’t think it’s any more time intensive than using a cricut and people make money with that all the time. While I agree it’s not a largely scalable business model, you could make some fun money with it.
can I do the dragon effect with the xTools M1?
You can definitely try it and see what happens.
Did the dragon residue wash off? When I've done sometime similar in the past it didn't but that was a different product.
I haven’t washed it yet but my kid got it wet and some of it already came off. Not sure if it all will.
@@MakerExperiment thanks for answering. That's good to know too.
Thats awesome, how much is the laser unit 😊? Would you assist in setting up the software especially for vinyl engraving for tshirts?
The laser I use starts at $9,995 or something like that. I do offer coaching and trainings for people that want 1:1 help if that’s something you’re interested in. I will say that it’s a pretty tricky thing to dial in.
@@MakerExperiment it’s an awesome and it makes working with vinyl much more easier, however buying a unit is somehow expensive for me currently 🤷🏻♂️
Dragon
Nice
Thank you!
Im cutting on a Thunder 80 watt laser. Tried cutting my vinyl but not having good results. Can you please explain the part about changing your frequency. Thanks
That’s only an option if you have an RF tube laser. If you have a glass tube laser, it’s not possible. Have you tried doing a material test grid of various settings?
@@MakerExperiment thanks for reply. That helps. I will give it a shot lowering power and adjusting speed. Once again thank you for all videos. Very helpful.
@@mikesmith7989 you’re welcome!
Seriously? You couldn't give them a wash and let us know how it turned out? Somebody owes me 22 minutes.
They’re still holding up.