These guys lived in Ukraine and had a TV/Radio Repair Shop. They started their channel during the war in Ukraine. So basically the modern world had come to an end for them. I think they must have been making money from their channel because they have done a ton of videos (unfortunately most are in Russian).
Guys wtf 😂 400 Amps ? 100 amps? 😂😂🤣🤣🤣 That motor has maximum 600W not 88000W or 22000W 😂😂😂 A house has a fuse of about 40A to 60A. This motor having maximum of 600W uses 2.6A to maximum 3A not 100A. Because is 220V x 2.6A which gives about 572W. So as long as they have above 2.6A then they can have a good torque on the motor to push the person on the bike.
@@girlsdrinkfeck well yeah if you pass lots of Volts or Amps through it. But if it was 10A at 12V it would be fine or 5V at 20A but more than 100W is not that good for a long period of time.
Gotta love those universal motors. If you're powering it straight from the battery you should be able to PWM power to the motor to get throttle, just make sure the FETs are logic level and flyback diodes are good, and you can use the signal from the accelerator you already have.
Nah he closed the eyes 😂 I weld with normal sticks and they are a pain in the ass with that mask so sometimes I just close the eyes right before I touch the metal if I spot-weld.
So awesome guys! The idea about the throttle seems similar to the Excelerator pedal on new cars these days… Although I prefer something more direct as well. Thanks for the videos, cheers!
Love these videos! I have an old rusty cycle like that at our village house, I'm thinking to somehow power it with a drill motor or something. Your videos are a great inspiration for ideas.
Use any Motor from a Scrap Car...Heater Blower Motor.....The Starter is good...and Powerful..and They only Require 12 Volts to Run....I Made one with an old Blower Motor and it will go 35 to 40 Kph....And I use Li Ion Batteries in Blocks to Power it....And an old Drill Switch as a Throttle.
Sir you could have used a tire jack to increase the width of the frame near the rear wheel. Would have saved a lot of time and stretched the frame without breaking it but lovely video
CREATIVE + IN SANE = KREOSAN...!!! 🤪😎 I LOVE YOUR IDEAS...! Next time use super Capacitors/ high ampere for your EV ...! we want to see what happens 🙃 !!!
*@KREOSAN English* ----> to *@WeldingDude* eg: 7:35 Make him use welding glasses, so he don't get blind in like 3 years from now. Or at least take some regular glass & black it with fire. The danger is from UV- & IR-lights, that we can't see. those "protective" see-through glasses does NOTHING to stop the dangerous lights.
That motor would probably handle 400vdc for about 30 minute burst, maybe add a fan to help cool the brushes! Don't forget, as volts go up so does the current, meaning double volts, 4x the wattage,
Try placing a pure sine single-phase transformer with a power supply of more than 1000 watts on the bike and have it on the frame. Then you plug the washing machine motor cable into the pure sine transformer. after you do it the motor will work at 15000 revolutions. To adjust the revolutions from the motor you will need a speed controller for 12 volts or for 24 volts. If necessary, try placing a gear on the motor shaft and a different gear on the rear wheel shaft. Install a chain from the washer motor to the rear wheel sprocket.
This really be something to increase toward 220 volt DC from even more of batteries. Washing machine motor is brushed type that even DC can also work. You may have really insane power from full 220 volt DC.
If the modern world came to an end, these guys wouldn't know it.
@Psychedelic Mind I honestly think people like this have the best chance of surviving climate change.
Brilliant guys
They are the kings when the apocalypse comes...
hello hun ha ha yeah true, I just built a 250w ebike from a cheap kit on my channel.
These guys lived in Ukraine and had a TV/Radio Repair Shop. They started their channel during the war in Ukraine. So basically the modern world had come to an end for them. I think they must have been making money from their channel because they have done a ton of videos (unfortunately most are in Russian).
"looks like a seat for haters" lmao
I had to replay that to make sure I heard right
@@oofig Dude, shit had me dying, lmao.
timestamp?
No, for batty boys
Russian welding glasses: turn head, close eyes!
protection for baby, russian eyes immune to welding..
@@fraaggl in Vietnam , there are a lot people that do the same as this guy lol
@@minhvotran1115 i look at a vietnamese guy on youtube who weld bare foot and without glasses so you are right !!
they're ukranian...
Like AVE would say time to engage safety squints.
“The tire got 30 patches”
(Turn it around
“Made in USSR“
USSR folded in 1991 it just shows how old that tube is. No wonder why it has 30 patches one foe each year LOL!!
lol
Russia : Never mind
At what minute?
@@norby93 7:11
You should make a washing machine using e-bike parts as a challenge 😃
😝😝
Pushes 400amps through small wire... "why is it hot"
I don't think it's that many amps... Maybe 100 amps
Guys wtf 😂 400 Amps ? 100 amps? 😂😂🤣🤣🤣 That motor has maximum 600W not 88000W or 22000W 😂😂😂 A house has a fuse of about 40A to 60A. This motor having maximum of 600W uses 2.6A to maximum 3A not 100A.
Because is 220V x 2.6A which gives about 572W. So as long as they have above 2.6A then they can have a good torque on the motor to push the person on the bike.
@@johnnymotors2023 thats still a thin wire for 20a
@@girlsdrinkfeck well yeah if you pass lots of Volts or Amps through it. But if it was 10A at 12V it would be fine or 5V at 20A but more than 100W is not that good for a long period of time.
@@johnnymotors2023 it's not the voltage that heats up the wire it's the amps
2:05 safety squints engaged!
Yeah I had my safety glasses on while watching
"it has a nuclear speed now
"
These guys basically live in a workshop. They are Einsteins of the Ukraine.
Gotta love those universal motors. If you're powering it straight from the battery you should be able to PWM power to the motor to get throttle, just make sure the FETs are logic level and flyback diodes are good, and you can use the signal from the accelerator you already have.
As an Italian, I loved that sudden "mamma mia!" ❤
Allora non so l'unico italiano che guarda sto canale
@@cianuro6210 siamo minimo noi 2 😂
Siamo gli unici che vedono cose di qualità
@@cianuro6210 eh no
All made famous by an Japanese Italian plumber 🤣😎
I love how resourceful you guys are
I love your invisible welding mask!
"Recently, the washing machine has gone crazy!"
I'm not sure about that.
Yes please 300 volts sounds awesome 😁
Yes i agree😅😅
KREOSAN Motorcycle Company
" I can feel the thrust now"
7:45 for a second i tough you're talking about Half-Life 2. Yes in this game combine is a type of soldiers
0:53 this guy just stared at the weld and absolutely torched his corneas
Nah he closed the eyes 😂 I weld with normal sticks and they are a pain in the ass with that mask so sometimes I just close the eyes right before I touch the metal if I spot-weld.
Say "Hello itchy corneas!".
Johnny Motors Good luck with that, you hero. There’s light in the UV range that will still cook your retinas. Use a mask!
@@JesusisJesus I don't look into the light the whole time, just till I touch the stick to the metal 😂
Johnny Motors Enjoy the sunburn. UV passes through many things.
i see you use security shoes - also for welding - nice !
Awesome! Been waiting for this
So awesome guys! The idea about the throttle seems similar to the Excelerator pedal on new cars these days… Although I prefer something more direct as well. Thanks for the videos, cheers!
YOU GUYS ARE AWESOME!!!!! MUCH LOVE FROM OVER HERE IN CALIFORNIA!!!!! NEVER STOP CREATING AND INSPIRING!!!!! THANK YOU FOR ALL YOUR VIDEOS =)!!!!!!!!
My lord that bicycle tube had 31 patches on it. 31!
5:54 - I was laughing pretty good at this part! You fellas are total steampunk tech gangstahs.. NEVER CHANGE!!!
#NUCLEARSPEED #THRUST #DEMONICPOWER
Love these videos! I have an old rusty cycle like that at our village house, I'm thinking to somehow power it with a drill motor or something. Your videos are a great inspiration for ideas.
Use any Motor from a Scrap Car...Heater Blower Motor.....The Starter is good...and Powerful..and They only Require 12 Volts to Run....I Made one with an old Blower Motor and it will go 35 to 40 Kph....And I use Li Ion Batteries in Blocks to Power it....And an old Drill Switch as a Throttle.
@@orionx8295 dude starter motors are good for short use only. They'll burn out after long periods of use
put the battery in the front to prevent wheely pops. use solid inner tubes for the wheels purrrrfect
You folks make the coolest stuff. Thanx for the post.
0:15 His neighbors must love him!
Love your channel guys 👍😎✌️ especially Pripyat adventures 😎😎😎! Keep it up 👍
"Now it feels normal." * Drives away on rusty bike propelled by washing maschine motor with extension cord *
The amount of diy in just this one video is mind blowing ahahaha
3:36 it sounds just like a washing machine.
Well, no shit.
Your neighbors must love you! Futuristic, I just don't know if the world s ready for this....
This literally just when through my head like 5 minutes before I seen it in my suggestions
Bra jobbat grabbar! Schysst hoj!
Another great upload!
I like the bike, at first I thought you would need a big loooonnng extension cord to power it. Those washing machine motors do crazy RPM's.
That's so sketchy! I love it!
Great work
Welds pedal crank to axle - "It will serve you forever now"
Yeaaa, Eastern style ftw!
I like the rim as a pulley idea!
Nice video. This kind of thing are really useful in the daytime and to go to the work. Thanks.
Mammamia.. I'm amazed by their craftmanship.. So dark and gothical.. Worse than indian at work.. Keep it up..
Super fast bike
Kreosan: No brakes needed here
Sir you could have used a tire jack to increase the width of the frame near the rear wheel. Would have saved a lot of time and stretched the frame without breaking it but lovely video
Nice guys keep going making this videos😂😂👌👍👍👍
Ear defenders and safety glasses for grinding. As for welding.. Not so much. "Nah mate.. I'll blink, I'll be a'ight." hahahaha
i come to this chanel every time i want to know how everything amazing
вам бы ещё переводчика, который разбирается в электротехнике)
when the Dead scrap turns to life nice👍👍👍 new subs here guys.
Forget about the bike. This guy's problem solving skill is second to none!
Really cool man!
I would love a DIY vehicle. This is the type of videos that I like. Is it possible to put 2 washing machine motors to make the bicycle faster?
This would be a good project for a motorcycle
@2:16 Futuristic ? Yeah Mad Max future. You will ride eternal, shiny and chrome.
next build a ultra long extencion cord
CREATIVE + IN SANE = KREOSAN...!!!
🤪😎
I LOVE YOUR IDEAS...!
Next time use super Capacitors/ high ampere for your EV ...!
we want to see what happens 🙃 !!!
That’s not a battery - it’s a BOMB lol 😂
Top work!!
0:05 Exynos Processor
0:13 Snapdragon 865
How about 855+
Haha
Ахахаахаххах
another great video guys :)
What! " WATCHING MACHINE "😂😂😝😝😝😝😝
Excellent 💕👌👍
But my hope will never die!
Good stuff. Haha do some wheelies
"Cuts bike frame" alright let's see how fast we can make this bad mamma jamma 😂
This is "EASY" in the Ukraine, but in the States, I'm afraid this is forbidden alchemy. Well done!
the leagacy lives on!
Yes! Hey that mechanic is smart! Use the halbach array for the throttle.! I gotta try!!!
The guy doing all the work looks like Pete Buttigieg
"this all looks reliable"
ngakak wae ono dagelan londo koplak... wkwkwk
*@KREOSAN English* ----> to *@WeldingDude* eg: 7:35
Make him use welding glasses, so he don't get blind in like 3 years from now.
Or at least take some regular glass & black it with fire.
The danger is from UV- & IR-lights, that we can't see. those "protective" see-through glasses does NOTHING to stop the dangerous lights.
Or use wish.com and get cheap welding glasses
Cool! 👌🏼
That motor would probably handle 400vdc for about 30 minute burst, maybe add a fan to help cool the brushes! Don't forget, as volts go up so does the current, meaning double volts, 4x the wattage,
Easy E-bike DIY ...
*starts cutting and welding*
I love your channel, so funny!!
I’m glad he he chose the batterie model 😂😂
We been more extension leads so I can reach the shops!
Slavic science!
Nicely done
эти птицы так раздражают!
GIVE IT MORE POWER!!!👍
6:09 'Mamma mia'
Do you speak italian? xD
I love this channel
What voltage and amps is the motor running on? Did you use a regular household inverter.
oh my i love it
This is far better than "Jackass"... At least you get to learn something!
This was awesome. :D
AWESOME.. Now we need a 4 Km extension cord... :)
Use 5 kilometre long wire and go around city. It will be new invention of these two Einstein guys😀
What in the third world country did I just watch?
From what site did you buy the inverters from dc to ac can you apply a link please?
USSR Tire, nice
This guy lives in Ukraine occupied by Russia. Therefore, he lives in the USSR.
And he has no future
"It has a nuclear speed now!" "Demonic power"
Try placing a pure sine single-phase transformer with a power supply of more than 1000 watts on the bike and have it on the frame. Then you plug the washing machine motor cable into the pure sine transformer. after you do it the motor will work at 15000 revolutions. To adjust the revolutions from the motor you will need a speed controller for 12 volts or for 24 volts. If necessary, try placing a gear on the motor shaft and a different gear on the rear wheel shaft. Install a chain from the washer motor to the rear wheel sprocket.
Wrong
This really be something to increase toward 220 volt DC from even more of batteries. Washing machine motor is brushed type that even DC can also work. You may have really insane power from full 220 volt DC.
Build mini nuclear power plant+install on the bike= unlimited range DIY electric bike
Suggest it and they will probably try it. lol
How are these guys going to get there hands on highly radioactive materials?
All joking apart swapping voltage you are making the maximum power transfer work neat.
Put a LARGER pulley on the motor shaft.
The one you have is too small. It has to be at least 5 cm in diameter.