I have followed your directios to be able to have the AI thinker program create an SDK build although when I click on the link to build the SDK it fails. When I go in to the program again I get this error: GPIO_A28 default is low level It is designed as a PA chip enable control pin on the standard example development board, please confirm that the hardware design has been modified (high level will affect the audio broadcast function) I have attempted to change from high to low and low to high nothing seems to work. Do you have any suggestions?
When I try to build the sdk, i leave it on for hours and it does not actually build. I've tried different computers and different wifi connections and I still get the same issue. Is this an issue just on my end or is there a reason why it isn't building?
Please reply 😢Sir i have an issue i was on step to upload the firmware file but by mistake i have uploaded the wrong file and i it is not getting reset and im unable to new firmware because not the rest button is not working
Can i make a simple Live audio transmitter using this VC - 02? like transmit audio in local server in to listen that sound live in any locally connected device like pc tab mobile.
Is there any pwm output pin ? I think adding new custom voice command to (DF robot offline voice recognition module ) is easier than the AI thinker VC-02 module.
How many max commands ? Can we add same settings shown in. Video for leftover commands , And secondly does it really detect voice if it's noisy around same as Alexa or Google , range test you did is in silent environment. This has to be best tutorial on vc02 so far m getting one .
Max 150 commands including wake up and all other commands Secondly in noisy environments it’s not performing well as it just has 1 microphone so we can expect active noise cancellation and precise listening I’ll test it on noisy environment and put up a video
This is cool, I had 2 of these at home, but I couldn't figure out how to get it to wake up... How do you know the 3 GPIO pins that have the leds on them? Warm, cool, and light pin??
Sir I have a problem in the registration process error of network error there are no any issues with network what do I get registered in website......?
Is there any issues with the ai thinker website. As I try to login it says network error. Before it used to work for last few days it's not opening. Is there any other way to build the custom firmware
hello, i've tried burning mine but it says "failed to open serial port" (it's actually in chinese and i google translated it) in the 3rd column. How do i fix it? I also tried to connect our voice module (AI thinker VC-02) in another laptop that has ch340 drive and when i connected it and open the humming tool it it just say "there are no items to show in this view". I don't know what's the problem with it...pls help🥲
@@techiesms south africa, i'm trying to give my lil robot a low power alternative to running a raspberry pi for this very reason. as it just makes sense that this board is the answer.
you lost me at that line "abki baar 400 paar".I have unsuscribed you. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work. Its not about supporting bjp its about keeping your personal ideologies and opinions away from your work. Earlier you used to promote different companies doing the same thing, I know almost every electronics youtuber does that with pcb manufacturing but it reduces your credibility. Sure it gives fat profits in short term but in long term you start to loose people's trust. Promoting at most 2 companies doing the same thing is somewhat acceptable, you promote almost every major pcb manufacturer from china. I can ignore that. But Promoting a political party in peak of elections, I don't know you got paid for it or its your personal ideology, IT IS WRONG. And please don't take it as a hate comment but rather as a criticism. And again its not about bjp or congress its about ethics and morality of keeping personal and professional life separate. But one thing is for sure, you have lost an true subscriber, viewer and a customer forever.
@@techiesmsyou lost me at that line. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work.
So what will you be making with this ?
i need one for my robotics project but cant get one anywhere
how many commands can it support?
I have see the taobao it said english firmware not supports the wake up word
Give voice to my HA setup
Home automation
one of the best project brother 😍😍
Thank you 👍
Brightness means the over all clarity of the voice
Wonderfull... The first and unique AI Thinker firmware Tutorial. Now Just need an Arduino Uart application, for use more pins. Thanks from Chile
Yes you can easily integrate that
Ye sahi tha abkibar 400 par❤❤
Brother you are awesome 😎😎😎😎👍 , i won't miss your videos ❤️
Just Keep Supporting and Keep sharing our videos ✌️
I definitely will
Dude this is awesome! Thanks!
Glad you like it!
Abki baar 400 par that was really appreciated 😂👍
Amazing project ❤ got a new idea to use it in my robot
Nice….
As always, it was a wonderful tutorial.
Glad to hear that you liked it ✌️
Excellent video bro.
missed to mention in the video that
"automatic study commands only support the Chinese version"
Yes, true
I have followed your directios to be able to have the AI thinker program create an SDK build although when I click on the link to build the SDK it fails. When I go in to the program again I get this error:
GPIO_A28
default is low level
It is designed as a PA chip enable control pin on the standard example development board, please confirm that the hardware design has been modified (high level will affect the audio broadcast function) I have attempted to change from high to low and low to high nothing seems to work. Do you have any suggestions?
do not use that pin
I’ll post the image of the GPIO pins you can used in Vc-02 tomorrow
When I try to build the sdk, i leave it on for hours and it does not actually build. I've tried different computers and different wifi connections and I still get the same issue. Is this an issue just on my end or is there a reason why it isn't building?
Please reply 😢Sir i have an issue i was on step to upload the firmware file but by mistake i have uploaded the wrong file and i it is not getting reset and im unable to new firmware because not the rest button is not working
Great video, looking forward to seeing you intergrate other devices
Loved that Abaki baar 400 par
does the microphone range upto 31 feet? how the speaker sound is so clear from that far so you use two mic to record this thing?
Yes
You can observe in the video that I have placed another mic near the vc02
Does The Boards Come With CH304 driver pre-installed? And If Not Then How To Flash It ?
Sir driver need to be installed in computer
Can i make a simple Live audio transmitter using this VC - 02? like transmit audio in local server in
to listen that sound live in any locally connected device like pc tab mobile.
No
Waiting for a crazy project with this
They should add some tones with commands like alexa. Like ding after command execution.
What is the difference Df Robot Gravity Voice Recognition Module and Ai Thinker VC-02?
Gravity recognise any language but has less commands and can be programmed directly without programming,
@@drelectronics13 Thanks 👍🙏
excelent helpfull video
great project , waiting for more
What about the Nicla Voice? would it work with a project like this?
Thanks 👍
Welcome 👍
Is there any pwm output pin ? I think adding new custom voice command to (DF robot offline voice recognition module ) is easier than the AI thinker VC-02 module.
Can i program the bare VC-02 module without breakout board using FTDI module via RX TX pin?
Just not love , truly madly deeply in love with this beautiful cute thing 💕
Hole project is ready for readymade sale
How many max commands ? Can we add same settings shown in. Video for leftover commands ,
And secondly does it really detect voice if it's noisy around same as Alexa or Google , range test you did is in silent environment.
This has to be best tutorial on vc02 so far m getting one .
Max 150 commands including wake up and all other commands
Secondly in noisy environments it’s not performing well as it just has 1 microphone so we can expect active noise cancellation and precise listening
I’ll test it on noisy environment and put up a video
thanks . and please make video for to attach micro controller 🙏🙏🙏
Sir is it better than the esp ai thinker please reply.
Sir please repky..
Great video ...Is the AI Thinker website working unable to create SDK file......finally produced firmware file took nearly 2 hours...
sir i have a Ai-thinker vc-2 main chip. is it possible to flsh and proggram this chip with esp32 or 8266? if it is possible please make a video.
Saludos, excelente tu canal, una pregunta: el módulo puede reconocer diferentes voces a la vez o sólo la que se entrena?
Best 👌 thanks
can i use it for with arduino to give voice command to this board and send that data to arduino
buen video...me ha aclarado un par de detalles...
Exellent tutorial as usual, Are there any wakewords which sounds lile.english words?, Wanted to try this for my HA setup.
This is cool, I had 2 of these at home, but I couldn't figure out how to get it to wake up...
How do you know the 3 GPIO pins that have the leds on them? Warm, cool, and light pin??
How to conect vc-02 to ESP (not via gpio but via some protocol)?
Awesome...
thank you so much! can you make a video about this how to use a esp32 with this module please..? love your videos
Does it support any language, or only English and Chinese?
English and Chinese
@@techiesms tks
Sir I have a problem in the registration process error of network error there are no any issues with network what do I get registered in website......?
I put the complaint and now it’s working. Please check
Make a same video by adding remote control light fan on off
Create a home automation project with this board using or LEDs, bulbs,etc.
Cool. could you help with a schematic diagram and a vid using UART and IIC. IIC more preferrable
Does this module support Indonesian? so we can say commands in Indonesian
Is there any issues with the ai thinker website. As I try to login it says network error. Before it used to work for last few days it's not opening. Is there any other way to build the custom firmware
I am also facing this issue....
I have put the complaint and now it’s working. Please check
Awesome 😍
Kya es vc02 module ko mobile se kod kr sakte he please 🙏 answer me sir
No
Do you need website to create account and please restock it 😢
It will get in stock by end of next month
can it say the time
if yes how
hello, i've tried burning mine but it says "failed to open serial port" (it's actually in chinese and i google translated it) in the 3rd column. How do i fix it? I also tried to connect our voice module (AI thinker VC-02) in another laptop that has ch340 drive and when i connected it and open the humming tool it it just say "there are no items to show in this view". I don't know what's the problem with it...pls help🥲
Install port driver
Bhota sai bhai
An Indian tutorial assisted by an Chinese AI English voice, what could go wrong ?
Apki baar 400 paar 🥰🥰💗💗
✌️
Can you make cash on delivery available please?
abki baar 300 meh bukhaar🤣
abki baar tuta ahankaar🤣
Hello, a question, do you think there is any way to make it recognize words in Spanish?
Your videos are great!
Saludos desde Cusco, Perú!!!
No
Is this available for sale
Yes
techiesms.com/product/ai-thinker-vc-02-kit-best-offline-voice-recognition-board/
Bhai esp32 ka use karke payment box banao jispe humare aawaz stored rahe aur payment hone pe humare awaz aye
czcams.com/video/Px_9yqayx3U/video.htmlsi=rBnoxwY32ktfrqqI
Thank me later
can i use my own voice
no
Pity it doesn't do English wakeup and doesn't have more control over what the replies sound like.
Sb kuch temporary lekin Akbi bar modi Sarkar with 400 par is permanent.
Abki bar 400 par 😂😂 petrol ka dam 😢
lol
😂😂😂
awesome but impossible to purchase here
Where r you from?
As we also ship outside India
@@techiesms south africa, i'm trying to give my lil robot a low power alternative to running a raspberry pi for this very reason. as it just makes sense that this board is the answer.
@@techiesms i'll level with you i am poor and disabled so import costs are not in my budget.
@@SLAYERSARCH you can WhatsApp us on +918200079034 and we will guide you with international order
Hi sir. I want to talk to you by direct Message 🙏
Urdu/hindi please
abki bar 400 par 😂😂😂
you lost me at that line "abki baar 400 paar".I have unsuscribed you. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work.
Its not about supporting bjp its about keeping your personal ideologies and opinions away from your work.
Earlier you used to promote different companies doing the same thing, I know almost every electronics youtuber does that with pcb manufacturing but it reduces your credibility. Sure it gives fat profits in short term but in long term you start to loose people's trust. Promoting at most 2 companies doing the same thing is somewhat acceptable, you promote almost every major pcb manufacturer from china. I can ignore that.
But Promoting a political party in peak of elections, I don't know you got paid for it or its your personal ideology, IT IS WRONG.
And please don't take it as a hate comment but rather as a criticism.
And again its not about bjp or congress its about ethics and morality of keeping personal and professional life separate.
But one thing is for sure, you have lost an true subscriber, viewer and a customer forever.
Andhbhakt..
"Abki baar 400 paar" is amazing and 100% & 101% right.
KYa Matlab
✌️
Dekhte hai
@@techiesms absolutely 💯 💯💯💯➕️
@@techiesmsyou lost me at that line. I will never subscribe you again and would never recommend your channel to any of my friends. I think a professional person would have kept his political ideologies away from his work.