90-96 Corvette #1 - Instrument Panel Repair Digital Gauge LCD (2019)
Vložit
- čas přidán 29. 09. 2019
- Batee.com shows you how to repair the 1990-1996 Corvette Instrument Panel / Speedometer / Tachometer / LCD / Screen / Gauges. In this video, we show you how to repair most common issues with the cluster, including intermittent and unreadable LCD panels, faulty tachometers, and intermittent or non-working gauges and bulbs. See our other videos for more repairs and how to remove the instrument panel.
That's right, it only took us 20 years to get around to shooting this video. Why so long? Well, we had to save up for a car, a couple of 4K video cameras, audio, lighting, and a computer capable of editing 4K video...
Go to batee.com for the parts needed to repair your instrument panel.
Let us help with the repairs: batee.com/pages/90-96-instrum...
Go to batee.com for all your Corvette Electronics Repair Needs!
Thank you,
Bryan Thompson
batee.com Corvette Parts and Repair
sales@batee.com
(573) 578-9590 - Auta a dopravní prostředky
Wow! Really one of the Best Videos I've seen on CZcams. Outstanding. We have a 92 and a 93, the 93 just went completely blank while my daughter was driving it. The 92 Goes completely blank, tap the top of the dash, comes back on, and I watch as "Sys" pop up on the screen , then disappear. It's apparent after watching this video, I need better solder and the tool that sucks the solder off the connectors on past projects!! Great job displaying patience. Looks like I'm going to be buying some things from you! Again, fantastic job!
This video is a shining example of how the internet can be used for good purposes.
Okay so this is extremely helpful for the specific issue I’m having but thank you so so so much for that desoldering tip about adding some fresh Rosin core. I have struggled with desoldering for a long time and that is a game changer.
I have a left turn signal buld not working......yikes! a bit of work to replace that bulb! Well Done video!
THANKS VERY MUCH VERY HELPFUL
Do you have upgraded panels like the lights etc
on the 1995 Instrument panel isn't there a instrument panel dimmer control to the left of the instrument panel. Can that be fixed?
Can you elaborate on the "manipulate" part of removing the back? Do you mean to somehow unplug it. Mine is stuck alright, and I can't see anyway to un-stick it without the risk of breaking something.
Can I change the resistor for the tach without having to get something to read it? My tach shows 5000 rpm when at 2000, and is in increments of 250rpm difference. It's one of the last major things I need to fix, that I know of, but don't want to have to purchase the $600 cluster tester. its even out of stock as of writing this comment
What would cause the oil pressure to be stuck on 80?
Bonjour ou faire réparé closter c4 1992
Can anyone help me please? I'm in the UK and have a '91 C4, the speedo read out died and I followed your excellent video on the repair which worked a treat. Since then getting low voltage and stalling. Anybody have a pinout diagram for the connector as I suspect bad grounds, be very grateful for any assistance please.
You said "stalling" Do you mean that the ENGINE is stalling?
Is it possible that a fault in the instrument panel can cause the car to misfire?
No, the computer for engine control is outside of the instrument panel. The cluster is similar to a computer monitor. It shows what’s going on in a computer located outside of the IP.
What would be turn around time if I dropped it off,I live in Mountain Home Ar?
We can probably check it out same day, and depending on the issue, maybe send you home with it. Call us and set up an appointment, otherwise we might be out fishing!
@@crazyuncleburton great will keep in touch restoring 1996 hatchback,one thing at a time.
My LCD does a sort of "rolling" where my speedometer freezes, and then shows every crystal lit, and then goes completely dim, and it does this very quick in rotation between each setting randomly. Would you have an idea of what that is? Also my tachometer is off to about 4000 rpm when it's idling, and under load it instantly shows redline, I assume that's the same tachometer module you replaced in this video, would I be correct?
The rolling display is a failure of one of the digital data lines A11-A17 of the wiring harness connector. I recommend resoldering the 34 connections where the wiring harness joins to the instrument panel circuit board. Clean the wiring harness connector and the LCD panel connector with contact cleaner like DeOxIt. The tach issue you describe sounds like a failure of the analog cal IC. If you need us to do the work, we can do it in about three business days.
@@bryanthompson3180 Awesome thank you for confirming my hypothesis, I think I'll end up ordering the cal IC from your store, and then soldering it all myself, as I've got the experience, just not a corvette guy haha.
I wanna use this cluster on a project car is there a way to feed mph and fuel info to the lcd without a ccm?
You'll need the bcm from the c4, if you are using the c4 computer and bcm then yes you can get all the functions to work.
The factory service manual from the same year Corvette is available on eBay in cd rpm format and gives you the wiring diagram for the car, as well as troubleshooting procedures, I do know for a fact that the 90-96 lcd display will not work without the ccm and another lcd module that's buried up under the dash behind the HVAC box.. at least for the 90-96 cars, the 84-89 were different.