CFMOTO CFORCE 400 Winch Kit & Install
Vložit
- čas přidán 25. 07. 2024
- Do you have a CFMOTO CFORCE 400 and wish you had a winch? Well This is the video for you! MSC has put together the perfect fitment winch kit just for you CFORCE 400 owners. All you need in one kit and in this video we show you how to install it!
Buy your Winch kit HERE: www.mainstreetcycle.com/shopp...
Thank you folks!! I can’t wait to order mine for my CForce 400. Install instructions were very well demonstrated! Thank you MSC!!
Thank you I'm trying to switch out my ignition switch. I didn't know how to take off the plastic hood, Watching the video helped alot thank you.
Another great video I just recently ordered the two up seat from you guys for my 1000 overland girlfriend loves it keep putting out the great video's from Chris in Massachusetts
Awesome! Thank you!
Perfect! Exactly the video I needed!
Just bought one! Not sure what I’d like to see but anything with the CFMoto would be great! Durability, reliability, accessibility, anything
Nice job. I was wondering if you could make a video on why the instrument cluster lights up with key off when you hook up battery. Also why does it drain battery over night. Is that normal or a bad voltage regulator
A bottom skip plates install for 500s and 600touring would be great.
should the winch cable come out of the top or out of the bottom of the spool?
great job fellas
Thank ya
Where can I get the winch mount and dairlead mount for my 2022 cf moto 400?
Do they have mounting brackets for the 2022 400.
Any videos on installing a tow hitch to a CF MOTO
How to hook up some blinkers do your CFMoto
Looks great guys. I have a question on my quad 2021 cf 500 my winch goes out but won’t go back in I checked switch it is good I took winch out and put power to it it moves both ways. We’re is the stock solenoid located.
It’s up under the hood on the 500..
Pretty cool. I have a Gen 2 400 and the parts department sold me an install kit that they said was for the Gen 1 400 but "should fit". It did not. I had to cut the mounting plates down quite a bit to get it in there.
We will do a Gen 2 kit install in the near future
@@RealTalkPowersportsthat would be awesome. I plan on getting one of those for my gen2 but don’t see any kit online or anything
I just purchased a Gen 2 400. What is the name of the kit the sold you? Because the winch I bought may be the same. It does not fit and I can not find a mounting plate with the correct holes.
@@wcb22516 It was the same kit shown in this video but I had to modify it to make it work.
Can you do a detailed side by side comparison on the 800 vs the 1000?
I will certainly work on that asap
I couldn't find that winch on your page. Do you have a link?
Little something for the 400 guys.
Yes sir!
Great Video! I want to do turn signals on my 22 800XC just to have them if I am on the street. I know Canada models have them. Any Ideas or suggestions?
Thanks!!
And I haven’t personally done turn signals on any ATVs
But I would assume a universal kit would work just fine
@@RealTalkPowersports I wanted to use the factory controls and do them like that as to make it look and work like factory installed. I'm digging into this I was just seeing if you had any info. Thanks!!!
Let’s see a video of installing reverse lights that come on with the shifter.
Can you recommend a fix for my Uforce 800 to take the jerkiness out of when starting out?
Have you tried a MSC stage 1 clutch kit?
Also if you have slipped your CVT belt before then it can cause it to jerk
Does it a 2023?
How about make a video of how to install a remote to a winch .
Any tips to getting the CVT intake screen back on after you take it off?
You need 3 hands for that haha
In all seriousness it is aggravating to get back on..
@@RealTalkPowersports Indeed. I have yet to succeed--a third or forth hand would be very helpful.
Looks complicated !