How to Replace Rear Parking Brake Shoes 2006-2009 Mercedes-Benz E350

Sdílet
Vložit
  • čas přidán 21. 11. 2023
  • Buy Now!
    New Parking Brake Shoe Set from 1AAuto.com 1aau.to/ia/1ABPS03816
    This video will show you how to install new drum or parking brake shoes on your 2006-2009 Mercedes-Benz E350. For drum brakes and parking brakes, shoes will eventually need to be replaced. If you are overhauling your rear brake system, or just need to replace worn out shoes.
    This process should be similar on the following vehicles:
    2006 Mercedes-Benz E350
    2007 Mercedes-Benz E350
    2008 Mercedes-Benz E350
    2009 Mercedes-Benz E350
    Tools you will need:
    • Flat Blade Screwdriver 1aau.to/obvh/1AXAA00013
    • Pry Bar 1aau.to/oZP/1AXAA00020
    • 18mm Wrench
    • 17mm Socket 1aau.to/obKv/1AXAA00015
    • 18mm Socket 1aau.to/oarJ/1AXAA00043
    • Brake Caliper Compressor Tool. Single Piston. Lever Style. 1aau.to/oa7/1AXAA00288
    • Brake Caliper Compressor Tool. Single Piston. Screw Style.
    • Brake Caliper Hanger 1aau.to/okg/1AXAA00439
    • Needle nose pliers 1aau.to/oFY/1AXAA00051
    • Needle nose pliers 1aau.to/oFY/1AXAA00052
    • Pliers
    • 1/2 Inch Impact Gun 1aau.to/ovY/1AXAA00252
    • 3/8 Inch Impact Gun
    • E10 Socket
    • T30 Socket
    • T40 Socket
    • Ratchet 1aau.to/obPr/1AXAA00016
    • Torque Wrench 1aau.to/oaST/1AXAA00044
    • Brake Fluid
    • Brake Parts Cleaner
    • Gloves 1aau.to/oaxe/1AXSS00048
    • Paper Towels 1aau.to/oHm/1AXSS00035
    • Safety Glasses
    • Silicone Brake Parts Lubricant
    • Floor Jack 1aau.to/oagL/1AXAA00068
    • Jack Stands 1aau.to/o5g/1AXAA00065
    • Wheel Chocks
    • Wire Brush 1aau.to/ovx/1AXAA00079
    Subscribe: / @trq
    ⚠ DISCLAIMER:
    While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.

Komentáře • 4

  • @TRQ

    √ Watch the Video

  • @seavee2000

    Thank you-well filmed and clear. Am doing much the same on a 2008 Vito and they are almost identical,except for the pad fixings. I have one side of the hand brake jammed on and do not expect that will go as smoothly as your video...

  • @sigmaSERVIS

    i need to do this on my w211 but i will clean all the rust first is that ok?

  • @garethjones2171

    you have put the small spring wrong way