Im using my 2 channel XPA dr2 amp for stereo music only. Records and cds,, the occasional sacd. One day, i will put it in the home theater to test. But its awrsome for music.
I wish Emotiva would get into 12 volt mobile electronics with all their class ab technology like 99’s Precision Power use to have not these class D amps on the market.
Can someone explain channels driven to me for my scenario. I want to use an XPA6 to biamp my 3 main front, center and right speakers. They are 4ohm. How much power will they see running biamped vs normal. Can/Would you tell a difference at reference movie levels. As of now I just have a 5.1 but planning for a 5.1.4.
Why don't you show us the output of XPA11 in the last configuration. I'd like to purchase if my 175w heights can get that juice at peak levels without breaking a sweat. I listen to loud volumes in my music preferences on multicast mode via my Emotiva Rmc-1 16 Channel Dolby Atmos & Dts:X Cinema processor. Most of the time, I raise the volume as I'm hard of hearing in my older age. I'm rocking the TruAudio In-ceiling, 3 way 9” carbon fiber 3“ carbon fiber 1” titanium, swivel 25-175W 8Ω 32-20kHz 91dB speakers. 9.4.3 config.
I own both Emotiva Upa & Xpa series and i can tell head room and power are so much better in Xpa you cant compare them so save up for Xpa are my advice
@@swedenevguru8483 I'll take your word for it, much thanks for your perspective! I can hold off on fulfilling my dual monoblock fantasy for later later down the road.
I have this 3-channel Amp! Great product. Question though, is it normal to get a little extra "humming" sound coming from the speakers this amp is driving power to because it's driving more power? It's not bad, but, when I plug the tower speakers into my yamaha receiver, no humming noise at all. Plug into the amp, I get a little bit. Just making sure this is normal.
You might be getting a ground loop coming from something. Go one piece of gear at a time turning them on starting backwards with the amp through the chain and see which piece of gear has the noise its amplifying.
Opening new Emotiva gear reminds me of unwrapping my most favoritest Christmas present ever.
I love my XPA DR2. Sounds just great.
Thank you for your support!
Can u get bigger power supply to not lose power when adding amps?
Thanks I look forward to when I can purchase a XPA 7 channel amplifier
Comment proceder pour passer d'un xpa3-gen 3 à xpa11 gen3? ( For 7.2.4). Thank you.
We need a good stereo preamplifier with tape loop for us old folks.
It's been more than I believe 5 years and still no sign of the XPR1 monoblock new generation what's up with that
Simply, I need a job at Emotiva! The only way I could get their gear I would like. Please Dan I'm even willing to clean the place.
Im using my 2 channel XPA dr2 amp for stereo music only. Records and cds,, the occasional sacd. One day, i will put it in the home theater to test. But its awrsome for music.
Bring back the XPR series!!!
We have thought about this but has to be something special.
My XPA DR2 is warming up for a listening session as we watch this
Sweet!
I wish Emotiva would get into 12 volt mobile electronics with all their class ab technology like 99’s Precision Power use to have not these class D amps on the market.
Can someone explain channels driven to me for my scenario. I want to use an XPA6 to biamp my 3 main front, center and right speakers. They are 4ohm. How much power will they see running biamped vs normal. Can/Would you tell a difference at reference movie levels. As of now I just have a 5.1 but planning for a 5.1.4.
Why don't you show us the output of XPA11 in the last configuration. I'd like to purchase if my 175w heights can get that juice at peak levels without breaking a sweat. I listen to loud volumes in my music preferences on multicast mode via my Emotiva Rmc-1 16 Channel Dolby Atmos & Dts:X Cinema processor. Most of the time, I raise the volume as I'm hard of hearing in my older age. I'm rocking the TruAudio In-ceiling, 3 way 9” carbon fiber 3“ carbon fiber 1” titanium, swivel 25-175W 8Ω 32-20kHz 91dB speakers. 9.4.3 config.
Can’t wait to replace my BasX with an Xpa2. With the BasX sounding as good as does I can’t imagine how good the X series will be.
You website is a little convoluted can't understand how exactly to configure this and how much power it outputs.
We don't give the output rating on every configuration on the Build Your Own page but we can help you out if you email sales@emotiva.com
I wanna step up from by A300 and I decided to stay with Emotiva, I'm just torn between either saving for the XPA or for dual A1's
I own both Emotiva Upa & Xpa series and i can tell head room and power are so much better in Xpa you cant compare them so save up for Xpa are my advice
Wise words!
@@swedenevguru8483 I'll take your word for it, much thanks for your perspective! I can hold off on fulfilling my dual monoblock fantasy for later later down the road.
I have this 3-channel Amp! Great product. Question though, is it normal to get a little extra "humming" sound coming from the speakers this amp is driving power to because it's driving more power? It's not bad, but, when I plug the tower speakers into my yamaha receiver, no humming noise at all. Plug into the amp, I get a little bit. Just making sure this is normal.
You might be getting a ground loop coming from something. Go one piece of gear at a time turning them on starting backwards with the amp through the chain and see which piece of gear has the noise its amplifying.
If only you sold your product in Australia