DIY $1 Walmart Jason Mask Rehaul - Friday the 13th Part 3 Tutorial
Vložit
- čas přidán 11. 09. 2024
- New Series Schedule!
October 4th: Part 4 Mask
October 7th: Part 5 Mask
October 14th: Part 6 Mask
October 21st: Part 7 Mask
October 28th: Part 8 Mask
October 31st: Jason Goes to Hell Mask
AGHHH! Sorry about the extra minute of nothing at the end! My editing software seems to love doing that lately.
very nice
Do part 9 next!!!!!
when doing your holes use a smaller drill bit and work your way up to the size you need
It’s alright, at least it’s not 5 minutes of nothing like the H1 repaint video
Can I pay you. If so who much
I love how most masks that you can buy don't even look close to what the character was. My favorite ones to look up are the Freddy Krueger masks or Leatherface. Some of them look like completely different people.
Well that makes sense for leatherface...
Am I the only one that heard like, nails on a chalk board? When he was putting the red on
It hurt
I had headphones in
Exactly
My leg
Freaked me out...
Love this series, its awesome to see masks go from crappy store bought to looking like a prop that could have been used in the movies :)
I just love how you transforned it from a basic mask...to a professionaly awesome mask!!!!!
Always looking forward to seeing people make masks, inspires me to make my own! I love the way that one looks!
Your rehauls are sick dude. You did an amazing job on rehauling the crap stained Michael Myers mask. Keep up the awesome videos!
I did this last year, I bought a Jason mask and painted it really nice.
I might actually try this with those dollar hockey masks. Might even make an NES version too.
Try starting out Drilling backwards slowly. This will help start a clean hole. Then slowly drill foward until you can feel the drill bit almost come through the backside. You should see a small dimple on the backside. Put your drill bit in the dimple and drill slowly in reverse yhe rest of the way through. Wood tears out also when drilling so you can either use the drilling from both sides technique, or clamp a piece of scrap wood to the backside of your project. Oh and make sure you have a SHARP drill bit. You can hold a drill bit in your hand using the REVERSE/FORWARD technique just ga slow and don't press down too hard. Just a little more than the weight of the drill bit is all the pressure you need. You will feel the bit wanting to catch and snag so imagine it catching and snagging with a power drill. TAKE YOUR TIME 👍
What was that wierd noise in some scenes I thought it was my head but then i replayed it and it was in the video
I would highly recommend using a step drill bit for drilling out the vent holes. With a step bit, you get clean holes and you don't have to worry about those annoying burs and excess plastic.
I've started making this mask for my little brothers costume on my own before finding this tutorial and something that works really well in place of a drill is a small cone shaped dremel bit with a cheap dremel my grandmother had.. just for future reference or something.. that worked really well...
The part 3 mask is my favorite Jason mask
For a $1 mask it looks amazing after the work you put in. I still hate the fact they make the mask so flat and full faced. But when you are wearing it at 10:07 it looks to fit your face perfectly. I think it looks awesome. I have been watching all your Jason mask overhauls as well as the other ones (Michael Myers)...great job. Love all the Halloween content.
Really love the effort on these mask it shows talent
Nothing is ever useless. The shatters and cracks are now battle damage. Simple!
One piece of advice, it's better to put a coat of grey primer on the mask before the first layer of paint. It helps the paint not scrape off over time and also the mask has a slightly transparent look without it.
You should get the masks from spirit there Jason masks sell out and going some where else on October 31rst
There half off after the 31st
That looks sick dude. I wouldn't mind having that mask!
As you did you broke the mask because you didn’t do pilot holes I was worried so I just didn’t add the other holes but I finished two part 3 and 4 but awesome video I made mine with 7$ it wasn’t bad
For drilling the holes I just poke small holes with a knife then poke a pen through to shape the hole.
Love the mustache ❤️
I’ve been subbed since u made that captain America shield all those years ago
Love your mustache🤘💙
Nice work! My only real suggestion is that you should use the $3 bla-no I'm kidding. I think it's really cool you're going to take customizing this mask as far as you can. What my suggestion is actually about is the top forehead holes. Now it's easy to just fill in the hole below the two forehead ones but the problem is that it looks very wrong and that's because where the third hole is is actually at where the two forehead holes on the actual Jason mask sit so really the best thing you can do is space it out enough, drill out two extra holes at the level where the bonus forehead hole is and then fill the three holes that were already present on the mask and what you ensure is that all your side holes will line up more with the movie mask and also that your head chevron doesn't always look misplaced.
I was also coming to the comments to suggest a drill fix before you solved it, but I was going to recommend a step bit. It’s the same as drilling increasingly larger holes, but you don’t have to keep changing the bits.
Budget version of the solution is pilot holes, impatient version is the step bit. :)
I love your videos and I love Jason And I turned on post notifications I subscribed and I liked
It's funny how you can turn stuff into cooler stuff
hey man just wanted to say thank you for your MM tots repaint video. found it randomly online and i was so hype after watching that it made me go to the store and buy a mask just to repaint base off your simple video alone. supplies were cheap plus the coupon code made the mask cheaper so in essence my 50 dollar mask looks waaaay better then their stock 80 dollar mask.
That mustache tho. On point I need to grow mine like that
I honestly thought that the shape would be wonky, but it really looked good when worn,it looks similar to the part 3 mask
sickkk dude
This is an amazing channel just right for the spooky season!!!
You should try heating up the edges to shape them
I really want this mask. I love Friday The 13th and I love the videos were u make a Jason mask! Keep Up The great work!
I love all of your videos I really love all your mask's and I hope to get one of your mask's.
I love these vids! I could watch this all day! I’d love to add whatever masks you make to my collection that would be so cool!
Currently obsessed with your channel love your vids!!
awesome rehaul! so fun to watch your videos! just to clarify ¿will the giveaway be just for U.S residents? i'm from south america and for any other subscriber you have from other countries will be good to know. anyway keep the good work!
Your first video inspired me to make my own homemade Jason mask and it came out really nice so I've been a longtime fan
Same and now I’m making my own tutorials
I love Friday the 13th
i am trying to make these aswell i love these
Part 9 next plz plz plz plz!!!!! 👌👍👌👍👌👍👌👍👌👍👌👍👌👍
You make awesome masks.
Thank you for this video I'm going to try myself I don't have the items you have but going to make it work
If you would have made pilot holes with a much smaller drill bit, you might have had an easier time. The bit would not have wandered as much either. To make it even smoother, drilling the holes 3 times with sequentially larger bits would be the way to go.
...then you mentioned that later in the video. 😅
Part 4 mask video comes out on my birthday, can’t wait!
Great job. I think you could have improved it by cutting the mask down a little bit. It's too diamond shaped and large. You did an awesome job though. Way better than I could have done.
Really nice job on a plain cheap mask.
You should redo the new friday the 13th mask from spirit halloween, its not bad but i feel like you could redo it, im redoing it soon to the friday the 13th remake, its the same mold as the remake
What color paint did you use for that soft yellow??? I’m trying to make my sons mask for Halloween and I really want it to look like yours.
I kept up with everything brut putting the metal pieces in. No clue what to do there. Wish you would have slowed down and showed how to do that more
This channel is awesome af good job on that mask dude
Use smaller drill bits at first when drilling holes.
On eBay, you can get masks with the right vent holes for cheap. Just bought 10 for $2.25 each. Worth the extra buck 25.
True... but here's the thing, not only is he aware of those masks, the point of this video series is not to aim for movie accuracy. The point is to make a tutorial for what people would have the most common access to at the cheapest price and this hockey mask is basically it.
Really good vid man, I'm making this mask and in the hole filling process. After you let the plastic wood dry did you remove the tape underneath? I don't want to mess up anything.
Looks awesome, at rite aid pharmacy, there starting to feel Jason mask from part 3 I think, you should try one of those, anyways, great video, cant wait for the next one!
@Jacks I can explain. So you've most likely heard of the masks you can order off places like eBay that are only about $3 and are as close to the movies as you're gonna get. Well at Rite-Aid? They've been starting to sell those same kinds of masks.
Im new to your channel , great videos man i enjoy them and watch them almost everyday . Great job on that jason mask mate 🔪
Do a Freddy vs Jason hokey mask of Jason
Nice mustache!!!
Thanks for making this video, it’s an improvement over the other mask you made with way too much dirt effect.
Michael Myers What the f*** do you know about masksOooooooooh.
Oh.
@@EvanKillham This might be a small joke but I feel like genuinely answering something about masks. The thing is when it comes to weathering? There's a way to do too much of it. In the case of that first mask? It didn't look like it had layers of grime built up on it so much as it looked like it was just caked in brush strokes and paint.
Aspiring Creator It was a joke because Michael Myers, but I do agree it’s possible to overdo weathering.
They sell hard plastic versions of this mask at spirit halloween
They do but those are $15. This is meant to show how you to do rehauls that are the most cost-effective.
What a awsome job. Looks amazing.
Looks good! 🎃🤘🏼
I'm in the process of making a final Friday version, I'd like to show you if that's alright 😁
Jason Jason Jason Jason Jason
Right on time thank you
If i were you i would use the test mask to make like a destroyed jason mask
Hi I love your Videos
I love jason
Great mask
Nice stash bruh
Looks great!
what i did, i cut the border so i could make it smaller
There’s a big difference
Wonder how space is going to work
Can I use hot glue instead of plastic wood
Dude seriously the strap and metal pieces part you didn’t show how to do it at all
I did it, awesome vids
Candy man mustache
Good mask
wonderful
I don't think I'm as good at this as you, I touched mine and it exploded.
The sayer Of the law Just call it a Part 9 mask then it’ll be accurate
If you don't want your masks to explode? I'd personally recommend drilling tiny pilot holes before switching to a larger drill bit. If you want to be a bit more cautious? I'm thinking with plastic this cheap you could also take a slightly larger drill bit with your hand and gradually twist it in the hole to widen it more.
@@the-aspiring-creator4249 thanks I will try that.
Yes love the video hope I win can’t wait for the next one
Happy spooky season!
Nice!
I like to whach
I did this few years ago too fun
Hi I want the mask for my halloween costume please!!!!
What the link for the red marks
I love jason I hope I when a mask
Dot is cool
Nice
Awesome job!!💀🔪🖤
I want one
Thank you mine looks so much better
Ah man, was hoping my comment got you prior to this. You can get the super cheap Chinese blanks for about $3.00/ea. Online and they look WAY better man. It would be SO much less work and you could concentrate more on accurate paint 🤦🏻♂️ that didn’t look like fun, especially drilling.
Regardless a good job considering, but still could have had Jason quality about as good as the tots Myers rehauls with the much better and still cheap blanks.
That kind of defeats the purpose of these videos though. He did a painting tutorial on one of those masks so he's aware of them. The thing is this is for fans on a VERY tight budget who need a good Jason mask while maybe not having access to the really good masks.
Aspiring Creator
That’s false actually man. My budget is squat and he wouldn’t need to use any kind of filler to fill holes in the mask either, it would be easier and less work and look so much better.
I’m telling you they are under 2 bucks lol instead of a dollar so he’ll be spending a whole extra dollar per mask so that makes no sense at all, because you can stay on your tight budget.
I’m not spending a bunch of money on my stuff either and I use those kind of blanks all the time at least for part 3’s and part 4’s anyway and they look way way way way better.
So it definitely doesn’t defeat the purpose at all it makes the entire process much quicker and look so much better and like I said they cost under $2.00 man. Trust me I do this kind of stuff all the time as well and they really look great and they cost almost nothing to do. And they are accessible to anyone on the planet because they are all over eBay and Amazon. Just search dude, I promise I’m only trying to help because the masks that are a dollar more look very good and accurate.
@@GordonStudent Here's the thing though, he did a tutorial with that mask, he's well aware that those masks exist. These tutorials are made for people who don't go for those masks because to be fair, most of them are on online markets and they take time to ship. Some people don't do that and they prefer picking up a mask from a store and since these masks are what you're most likely to come across? He's showing how one could turn THESE hockey masks into proper Jason masks. It is not made for the sake of teaching people on how to make movie accurate masks.
Aspiring Creator that’s fine I thought the point of it though was doing a fairly accurate mask for very cheap. It’s just that this is EXACTLY what he’s doing in the video. You see what I’m saying?
Yes it takes a while sometimes to ship from China but again they are dirt cheap and I thought the focus was keeping costs down and making it look cool like his Halloween tots re-hauls.
I just think a lot more people would’ve enjoyed him using a more accurate blank especially if it’s practically the same cost as well is all I’m saying.
Man the TOTS masks he did are pretty high-quality and they do look accurate it would’ve been nice to see him working on one of those accurate style masks personally because I think the guys a great artist. I’m a huge horror fan so naturally I prefer the more screen accurate stuff and he certainly seems to like the accurate stuff as well even on these ones he is following a pretty specific movie paint scheme.
But I get what you’re saying.
t’s not a bad video by any means I just think he could have appealed to a broader audience using the other ones because there are a lot of mask makers out there and plenty could use better painting skills. I mean he even said he got like half of his followers from doing those tots Halloween rehauls. Hell, it’s The reason I started subscribing lol I like the guys paint skills and he was doing stuff that looked pretty accurate for dirt cheap, right on 👍
But each their own 🤷🏻♂️
@@GordonStudent He could've but also here's the thing. There are plenty of CZcamsrs out there who are doing that and it's kind of just universally known at this point that those masks are the best and he even knows since he did a video where he painted up one of those masks and it looked really cool. The thing is, the point is not to be extremely movie accurate because otherwise? He would've most likely used those masks. The point is to show how one can spend as little money as possible on the most readily available mask and make it look good which is another big issue that the $3 mask has. Aside from eBay? The only stores I know of that carry these are Rite-Aid, Halloween City and I heard Party City and often times the prices are not the best.
The $3 masks also have to be ordered in advance because unless you find a seller who lives closer to you? You're going to be waiting a full month more often than not which when considering that in October you'd want a Jason mask right at that moment can basically mean that unless you ordered the mask in September you're out of luck whereas with these thin masks? You can find them everywhere and often for only a buck whether it be Dollar General and literally any dollar store/convenience store.
Plus it's just more creative and fun. I mean let's be honest here, CZcams is not hurting for content involving repaints of that mask. People like Big Hush, CS5 Unmasked, PsychoFilms and more have made many videos showing how to thoroughly customize that thing and we're still getting more but we don't see too many people who focus on the stuff that is the absolute cheapest, the kind of items that cost basically nothing and I think that's what makes this fun because it truly is an exercise in creativity and skill. It shows people that they don't necessarily need that exact mask that Big Hush and others use to make a badass Jason mask that you can literally just plop down a buck and with a drill, paint and patience you can make something great.
Can you use red electrical tape for the chevrons?
If you wanna go get fucked
Comment to get Jason mask