Most east asian and southeast asian like chinese, japanese, korean, malays, indonesian, thai, burmese dont used nail, look at Myammar royal palace mandalay complex, dont used nail, indonesian sumatra 'istana besar pagaruyung' dont used nail, even with used brick or stone wooden part dont used nail, like japanese castle, thai temple and thai palace like grand palace bangkok, etc.. any in indonesia, cambodia, malaysia temple dont used mortar. cham malays/champa temple in southern vietnam,indonesian in java, bali and sumatra used red brick by rubbing until brick joined
If is true that Chinese carpenters came to Japan around 7th century in order to build Tempels. But : 1) there were carpenters in Japan, and Japanese Shinto-Shrine existed at 7th century. 2) lots of sophisticated joints have been developed in Japan, and 金剛組 exist since the time. As we can see that Japanese sword, 日本刀, has extremely high quality, there exists technique in Japanese 宮大工, which is unique in Japan.
You didn't explain wy it is more durable than other stuff, so il do it It is more durable becouse its wood on wood so its the same material that means in summer it will expand the same % as tze other part of the connection and stays in perfect shape, but if you have a connection whit wood and nails, the wood expands more when it gets hot in summer than the nail and will eventualy get lose
Wood expansion is one aspect yes, but it still can't be avoided when wood grain is 90 degrees to each other. More importantly not using nails avoid rust and rot from attacking the wood even after decades, and also allows for more flexible joints that can accomodate exansion/contraction as well as earthquakes.
I wood work, and I’m not the best but I’m pretty good, however this is absolutely insane, I’m guessing most don’t use any power tools and that is even more baffling. Mad respect to these people, just as much art as woodworking.
A table saw, miter saw, chain saw, etc are power tools. A hand saw uses your HAND to power it, a hand saw is not a power tool, if it uses electricity to power it then it is a power tool. If some use power tools ok, but there are obviously some in the video that do not.
@@GG-zq3zk I am Chinese. The old houses of my family were also built using this technique. These beautiful artworks symbolize our great East Asia! We need to make East Asia great Again!
@@landscaperdr2928 But they made it from a copy that was even better than the Chinese technology, and they continued to do so, maintaining the historic technology, which is a Japanese cultural technology, even though it did not originate in the country of origin.
@@user-io6xq4wd6sactually it's from China but let the Japanese learn it at the Song dynasty (the most florish time of the Maritime Silk Road) (I maybe kinda nerdy but this was the true history)
Fact: Japanese samarai’s did not sharpen their swords. They polished it for 100 hours until it was beyond razor sharp. I love the fact that this kind of patient attention to detail, and quality pervades every aspect of Japanese culture. In modern day, cars like Toyota have a strong reputation for “lasting forever”. You can literally never go wrong with a Japanese car…. and everyone knows that. What an incredible reputation to have.
Hold on a second. This is classical Chinese wood work. The technique was brought over to Japan. Known as “mortise and tenon” joints in the West, or “sunmao” (榫卯) in China, the technique was first discovered in China dating back as far as 7000 years ago. It was later brought to Japan where the technique flourished in the 12th century. At the pentacle of mortise and tenon joints woodwork is the Chinese Imperial Palace (aka the Forbidden City). Next time you visit, make sure you look up at the ceiling/roof of the buildings. The complex has one of the most sophisticated seismic damper mechanism ever made, constructed entirely out of mortise and tenon woodwork joints.
It is from China, and it's called the morton and tenon joint technique (榫卯). The earliest remains found are from the Hemudu civilization from around 7000 years ago. You can visit Zhejiang to see the remains. The Forbidden City (Beijing) and the Hanging Temple (Shanxi) were also built using this technique, and you can visit them too.
This made me emotional. My grandpa was a carpenter and quite the perfectionist. He passed away years ago. It would have been so cool to show this to him, I know he would have loved to see this level of craftsmanship
These woodwork techniques are Chinese in origin. Being historically the hub in East Asia, Chinese had influenced many neighboring Asian cultures extensively.
I thought I was a craftsman until I discovered Japanese woodworking and joinery, particularly sashimono. Sashimono is craftsmanship on a whole nother level
this is not from Japan, original came from China. In 507 AD in China, there was a great architect called Lu Ban, this buckle is his invention, in ancient China Tang Dynasty, Song Dynasty, Ming Dynasty, a large number of Japanese scholars and architects came to China to study.
As a carpenter trainee, I can attest to how hard it is to make perfect wood joints...mine are above average, considering I only started recently, but I wouldn't even dream of achieving such precision...it would be so nice to master this technique to be able to.
I know a guy who is a timber framer. Its a similar concept. Wooden pegs and specific cuts and joints are used intead of nails to hold up giant structures. It is a very time consuming and skillfull process. Its pretty impressive work, which makes me like this video even more. Mad respect to anyone who does sashimono. The effort and skills needed to do something like this are insane.
While the process is definitely time consuming, I think what matters most is the end result. Not only do you get a beautiful design, but also a very sturdy structure. Hard work for high quality will always have my respect.
Temples and other traditional structures built in this way have stood for hundreds of years and survived thousands of earthquakes. This is next-level carpentry. MAD skills! #Respect
this is not from Japan, original came from China. In 507 AD in China, there was a great architect called Lu Ban, this buckle is his invention, in ancient China Tang Dynasty, Song Dynasty, Ming Dynasty, a large number of Japanese scholars and architects came to China to study.
This ancient construction technique was ancient China in origin, not Japan. In ancient of Tang Dynasty, it was introduced to Japan and Korea, and then became popular there. Actually, this ancient technique is not only focus on furniture, and also used it ancient architecture in ancient China. Until to now, some artisan is still used it for furniture or tiny toys. The ancient technique is named in “Tenon and Mortise”(榫卯）,and it was deigned and created by the ancient artisan - LuBan (507BC).
In Germany we have similar but way less artistic techniques. I would say it's like the beginner-level of Japanese woodworking. (Tho these are still quiet strong joints)
@@benzness India, Pakistan, Afghanistan, Iran, Saudis doesn't have such wood workings and they are also in Asia. Instead they have beautiful stone carvings
remember, east Asia is sinosphere, pretty much anything you find may be attributed back to China. Just like most of the plants with names like Japonic are actually originated from mainland China
The same techniques are being used since aeons in India, to make doors and windows, every door n window and table etc in our house are made like these without using a single nail.
And also india.this technology was specially used in Indian shipbuilding.huge ships were built using this same technology that the ancient ships could carry huge loads and usually lasted for more than 100 years.the British destroyed the Indian shipb uilding.
This is actually a ancient Chinese technique, they use to build the rims of houses out of only wood and it would hold up quite well too(it’s not Japanese, it’s chinese, but Japanese still use this some times cuz they got earthquakes)
@@chalnervassor9430 I learned this in a carpenter course for beginners. It's nothing special. It was required to complete the course and I did it quite easily.
Ahahaha china. .. the place with tofu dreg construction and who produce absolute crap.... Look up what's happening with the three gorges dam. It IS going to collapse. It's just WHEN. And they KNOW it'll kill tens of MILLIONS in just hours. It's almost collapsed in every rainy season since 2020. They produce the cheapest crappiest version of everything else. They don't innovate or build anything with skill. Their aircraft carriers are splitting apart and can't even leave dock. And their "space" program is windows 98 level graphics. And their getting most of their rocket ideas and solutions from all the data that space X makes public and all the camera views of the rocket in flight. I kinda wish Elon would make less things public 😂 but hey they'll screw it up like everything else. ☠️🤡☠️🤦♀️🙅🤷♀️🤣
@@abhishekpasThere is no traditions of India using all sorts of furniture. The Chinese for hundreds of years have their meals on proper chairs and tables for their meals. Today many Indians still seat on floor using their fingers for their meals. Many centuries old Chinese furniture can be found in world's museums. But not from India.
@@jacku8304 we have tradition to eat on small table called as pidha made from wooden. Still it is in use. We still in villages make furniture with a locking system. It's widely prevalent even today.
The tea cabinets and other crafts that the Japanese brought back from China 1,300 years ago were Karaki Sashimono, from which various styles were born in Japan. However, in the first place, the technique of building joinery called wood framing was established 23,000 years ago during the Jomon period.
In fact, this is a process invented by the Chinese. The Chinese had mastered this method called "mortise and tenon technology" to build buildings 4,500 years ago.
Actually Japan acquired this technique from China. And China is also not the only one who invented it. Similar technique has been developed in elsewhere such as Europe and their stave church. Ancient China built enormous wooden constructions like temples and giant towers using this technique. And what unique to China is there's a technical treatise in Song Dynasty called "菅造法式” comprehensively and scientifically demonstrated their wood building technology.
Chinese engineers would be hired since B.C. to participate in the construction projects of the kingdoms in Korean Peninsula, and after the technology spread there, Korean engineers took part in Japanese architecture. For example, "Shitennoji," a famous Japanese temple, was constructed in 578 by three Baekje engineers(reference, Nihonsyoki) They also built the famous temple, "Horyuji" and established a construction company called "Gongogumi" for 1,400 years.
Your ancestors developed great cultural skills and spread them to neighboring countries. That is a good thing, but if you devalue another country's use of that culture as nothing more than replication, you will not be able to gain the dignity and respect that the former Chinese dynasties received from neighboring countries. It is a little mean to ask them to repay their kindness in the past.
This technique was vastly used in the East Asia, originating from China. It may vary in places, but was very commonly used not only in Japan, but also in China, Korea, India, etc. Also, though it may come from a different origin, there were similar construction techniques in Europe too. Just trying to say these techniques aren't native nor original for Japan. A lot of these stuff can be seen all over the world, and especially in Korea, where these techniques were really put into hand and mastered, then were passed on to Japan. But it is unique that Japan still uses and polishes these techniques to the modern days, thanks to them being vulnerable against frequent earthquakes. Wooden buildings noticeably withstand better against earthquakes, and because of that nature, Japanese have really mastered this technique and is probably in the best position right now.
Correct. In China furniture, such as tables, chairs, and chests, were created in this fashion. Even temples and palaces were constructed, using these methods,which never saw a single nail.
@@harisankar1932 true, for some reason whenever someone mentions the word, there is a special form of racism which is very dumb as well since Indian is even less heterogeneous than europe.
@@harisankar1932 Honesly, I don't like nor like seeing people spilling racism around, but there are a lot of Indians who say everything they have is superior compared to others and just makes people want to be 'that guy'. You know what they say, ultranationalism is just as toxic as racism.
Probably the best thing to learn from Sashimono is that wood expands due to cold weather and these very tiny gaps are nonexistent overtime due to this making the structure as if it was whole making it very stable, durable and long lasting if attached correctly.
@@mikuisgod4591Dude…. Don’t ‘just’ these pieces of art-joinery. Almost anyone can make a dovetail today. But these joints have so much intricacies they are well beyond the capabilities of I guess more than 90% of woodworkers. And I think I’m guessing that conservatively.
You probably don’t remember, but back in the ‘50s, the label ‘made in Japan’ indicated that the item had very limited durability. Now, it’s a sign of quality!
I wonder if you could do similar with different forms of metals like aluminum and steel to make joints that are as strong as a weld without having the weak points of a weld like the surrounding material being compromised from an arc mark
![I Can't Build a Bench More Beautiful Than This [Carpenter’s DIY]](http://i.ytimg.com/vi/Kp4wg9qWtmk/mqdefault.jpg)
That one at 0:39 is insane. Both a straight and corner joint. Unbelievable craftsmanship
Nail hammer can do the same thing
@@stevejung6470
One reason this was developed was to save iron for other uses, particularly weapons.
@@stevejung6470no where near as beautiful haha
@@Kaisolostudioalso more prone to rust insects and rot
@@BossOfAllTrades which one are you talking about? Sashimono or nails?
I am blown away at the intricacies of the woodwork such attention to detail!!!
Most east asian and southeast asian like chinese, japanese, korean, malays, indonesian, thai, burmese dont used nail, look at Myammar royal palace mandalay complex, dont used nail, indonesian sumatra 'istana besar pagaruyung' dont used nail, even with used brick or stone wooden part dont used nail, like japanese castle, thai temple and thai palace like grand palace bangkok, etc.. any in indonesia, cambodia, malaysia temple dont used mortar. cham malays/champa temple in southern vietnam,indonesian in java, bali and sumatra used red brick by rubbing until brick joined
CNC milling technology is amazing…😂😂
Just Legos Man.
You’d also be blown away if you built a house with this
@@safuwanfauzi5014Agh, than cam tek screws & tek guns...
Originally Chinese actually. Well adopted by Japan and Korea. You can get toys like that too, such as the Kong Ming Suo (a lock toy)
If is true that Chinese carpenters came to Japan around 7th century in order to build Tempels. But :
1) there were carpenters in Japan, and Japanese Shinto-Shrine existed at 7th century.
2) lots of sophisticated joints have been developed in Japan, and 金剛組 exist since the time. As we can see that Japanese sword, 日本刀, has extremely high quality, there exists technique in Japanese 宮大工, which is unique in Japan.
The video presents Chinese mortise and tenon woodworking construction techniques, which were later transmitted to Japan and applied.
This is definitely art.
It's called patience, something American woodworkers know nothing about.
This wood joint is called Sunmao. Japanese copied it from ancient china.
What does being American have to do with this video @@michaeladams2959
@@yanyanz3011it's called sashimono, meaning wood joints without nails or glue
@@michaeladams2959
Ay ay dont blame america
Blame europe
As someone who learned carpentry in college for 2 years I can confidently say, this is unbelievably amazing to me.
Same. Taking the kerf into account and still getting such precise fits is incredible. Lots of time and patience goes into this.
That's because you studied carpentry and not joinery.
@@absentia6164 joinery and carpentry. It was the same course.
Damn my dream hobbies are coding and carpentry respect 💪💪
My dad and hubby are carpenters as well, and they do something similar to this called “dovetail joints”
私の地元に江戸時代初期からある、釘を一切使っていない使っていない御屋敷があります。江戸初期から何度もあった地震でも倒壊せずに残っている建物です。
現在では集められないような大きな材木を使用して建てられたので、同じような建物を再現することは難しいと聞きました。
学校行事で特別に見せていただきましたが、押し入れに隠し階段があって屋根裏部屋に行けたりして本当に面白かった。
Cool story.
wide or long lumber? it cant be created exactly but it gan be adapted with multiple conjoined pieces
Sasageyo
Loved the story ♡
ドイツにもこういった土木技術はあったよね。日本もそれを真似て現在は発展したんだよ。
なんていうてるのかはわからんが、ここまでピタッとハマるのはほんますごい👍
日本の大工さんすごい😢
all stole from China
這是中國的
@@youngalex-nh1er But Chinese products break.
@@user-is7lz4ot6j 別被媒體洗腦了，偷盜是種不好的行為
@@user-is7lz4ot6j bullshit
You didn't explain wy it is more durable than other stuff, so il do it
It is more durable becouse its wood on wood so its the same material that means in summer it will expand the same % as tze other part of the connection and stays in perfect shape, but if you have a connection whit wood and nails, the wood expands more when it gets hot in summer than the nail and will eventualy get lose
If you don’t want loose joints then buy Japanese; thanks!
Wouldn't doing joinery with different woods make it so one will expand more than the other, therefore affecting some strength?
@@Elfrast yes thats correct but they normaly use the same wood
Wood expansion is one aspect yes, but it still can't be avoided when wood grain is 90 degrees to each other. More importantly not using nails avoid rust and rot from attacking the wood even after decades, and also allows for more flexible joints that can accomodate exansion/contraction as well as earthquakes.
Thanks for passing that along.
I wood work, and I’m not the best but I’m pretty good, however this is absolutely insane, I’m guessing most don’t use any power tools and that is even more baffling. Mad respect to these people, just as much art as woodworking.
I’m pretty sure now they do use saws to cut the wood
a saw isnt a power tool lol only ones powered by electricity are
@@ConManCone yes it’s a saw that uses electricity
A table saw, miter saw, chain saw, etc are power tools. A hand saw uses your HAND to power it, a hand saw is not a power tool, if it uses electricity to power it then it is a power tool. If some use power tools ok, but there are obviously some in the video that do not.
@@The_engineering_potato yes that’s what I meant
Japanese and Chinese and Koreans are God gifted people.
Respect from Afghanistan
❤
こういった技術を1500年近くかけて研鑽し伝えてきたんだよな、日本の大工は。
この技術と伝統は、まさに国の宝。
哦，1500年好厉害哦～～😅这是我们中国的榫卯结构，你们先多埋点近代工艺品，编造点日本历史再吹吧
いえ、これは昔から中国が使っていた技術で中国が日本に教えた技術です。
@@my_dadyそれがいまやこの有様ですか…
同感👍です🌸🍒
日本の伝統を守る宮大工は木材で加工できない物は無いと考える、それも金属を使わないで後から解体して又組み上げる事が出来る🌸
素晴らしいと世界に誇れる🍒
宮大工って本当に凄いよね
修繕ができるように考えられてるのがすごいですよね。世界最古の会社が金剛組という四天王寺を建設した宮大工の会社で創業1446年だそうです。
ただ聖徳太子が百済から三人の工匠を招いたのが始まりとあるので元々は朝鮮や中国などの建築技術だったようです。それが日本で高度な技術になったということかと。
@@GG-zq3zk I am Chinese. The old houses of my family were also built using this technique. These beautiful artworks symbolize our great East Asia! We need to make East Asia great Again!
@@landscaperdr2928 But they made it from a copy that was even better than the Chinese technology, and they continued to do so, maintaining the historic technology, which is a Japanese cultural technology, even though it did not originate in the country of origin.
crazy thing is that some traditional houses in japan are held up by this and are doing pretty well
Ancient china also did this, it's insane how good they hold up
...
If I remember correctly these are actually much more durable than just nails, though idk if some construction techniques or something are better
@@rift7609I’m from Japan but you’re quite right. It stands easily over 100 and some to nearly 500 years
Koreans do this, too 😂
海外の方にこうやって日本の技術が知られてるっていうのはなんか感動するな
ありがとうございます
I love the quality of your products.
@@arhylle Thanks
@@user-io6xq4wd6sactually it's from China but let the Japanese learn it at the Song dynasty (the most florish time of the Maritime Silk Road) (I maybe kinda nerdy but this was the true history)
from china
How shameless. It's Chinese, not Japanese tec.
I hope there are many who are willing to take up this craft. Need to preserve and carry on !
One of the things I love so much about the Japanese is this blending of art, craftsmanship and utility.
This is Chinese traditional skill. Stupid
yea but all that time & effort & aint nobody paying all that money for the pieces just a bunch of people lying & bs how they will buy it but dont
Thats the literal definition of crafts. Other countries have it too. Japan didnt invent that shit lmao.
@@Obi-WanKannabisjapan just do it way better i guess..
Except this is Chinese technology
Same thing in old Chinese architecture, it’s amazing how it can be so stable without any glue, nails or screws
Absolutely correct. And amazing to see structures built in this manner, still standing for centuries, despite seismic activity.
Fact: Japanese samarai’s did not sharpen their swords. They polished it for 100 hours until it was beyond razor sharp. I love the fact that this kind of patient attention to detail, and quality pervades every aspect of Japanese culture. In modern day, cars like Toyota have a strong reputation for “lasting forever”. You can literally never go wrong with a Japanese car…. and everyone knows that. What an incredible reputation to have.
Such treasures our pasts hold. We should always maintain the artistic skills and craftsmanship of our people's past.
Hold on a second. This is classical Chinese wood work. The technique was brought over to Japan.
Known as “mortise and tenon” joints in the West, or “sunmao” (榫卯) in China, the technique was first discovered in China dating back as far as 7000 years ago. It was later brought to Japan where the technique flourished in the 12th century.
At the pentacle of mortise and tenon joints woodwork is the Chinese Imperial Palace (aka the Forbidden City). Next time you visit, make sure you look up at the ceiling/roof of the buildings. The complex has one of the most sophisticated seismic damper mechanism ever made, constructed entirely out of mortise and tenon woodwork joints.
fr its Chinese
right
Woodwork : 😐
Woodwork, Japan : 😱😱😱
Thank you! I was literally searching for that comment.
Classic Japan being credited for chinese culture
A few years later, the locusts will claim that their origins are in China.😂
古代の日本や朝鮮では、何も発明されておらず、世界への貢献もゼロでした。古代の記録によると、中国の隋の役人が日本に行き、中国の皇帝に日本が野蛮な時代であることを報告するために戻ってきました。
It is from China, and it's called the morton and tenon joint technique (榫卯). The earliest remains found are from the Hemudu civilization from around 7000 years ago. You can visit Zhejiang to see the remains. The Forbidden City (Beijing) and the Hanging Temple (Shanxi) were also built using this technique, and you can visit them too.
😂😂
Japanese culture, and historical reputation for precision and fine detail is just fucking AWESOME!!!!
this is Chinese culture.
@@user-dr9ed2xk3land he is alrdy speechless
as a former member of the Carpenters and Joiners Union, i am blown away by this craftsmanship.
This made me emotional. My grandpa was a carpenter and quite the perfectionist. He passed away years ago. It would have been so cool to show this to him, I know he would have loved to see this level of craftsmanship
God Bless Your Grandfather 🙏
@@davidmathews2599 thank you for your thoughtfulness and kindness 💛
What happened to him?
@@TheFunnyDictator does your OCD also make you rude and tactless or is that something you do intentionally?
@@TheFunnyDictator does your OCD make you rude and tactless too or is that something you do intentionally?
200年とか300年前の職人達は鉄使わずにこういう技術で建物作るんだからすごい
これは中国からの技術です
@@user-K.J コメ欄みれば分かるけど、他国を貶しネット工作してる現代中国人が、先人の文化を継承できなかった理由がわかるよね？
先祖と神様は正しい方に文化継承して下さる
这叫榫卯结构
300 years ago, they were most certainly using not only iron, but steel as well
これは日本の「さしもの」について話してるんですよ。中国起源とか聞いてないですよ。
いちいち湧いてこないでくださいな。
中国を否定はしてません。
話の腰折るヤツなんなん？ってだけ。
These woodwork techniques are Chinese in origin. Being historically the hub in East Asia, Chinese had influenced many neighboring Asian cultures extensively.
This is insane!! I can't imagine the amount of intelligence and patience it takes to learn this!
I thought I was a craftsman until I discovered Japanese woodworking and joinery, particularly sashimono. Sashimono is craftsmanship on a whole nother level
Yep. It kinda puts even the most old school and exceptional of dovetailing joins to shame.
Puzzle piece craft it your self edition
3D Printer:
this is not from Japan, original came from China. In 507 AD in China, there was a great architect called Lu Ban, this buckle is his invention, in ancient China Tang Dynasty, Song Dynasty, Ming Dynasty, a large number of Japanese scholars and architects came to China to study.
It is not unique to Japan, for example Anglo Saxons use a similar joint in chair making. The Japanese learned it from knowledge exchange with China.
This is so beautiful.
it is
Ikr??
Amazing! These are all manual carvings with a keen eyes; steady hands and well planned designs... plus super sharp tools!
This Brilliant design
大切にしたい技術ですね
でも、今の家とかは指物ないよね
As a carpenter trainee, I can attest to how hard it is to make perfect wood joints...mine are above average, considering I only started recently, but I wouldn't even dream of achieving such precision...it would be so nice to master this technique to be able to.
韓国紀元の技術ですけどね😅
THIS IS KOREA TECH, NOT JAPS
@@user-dr2og7np6o要らんその補足
木同士で作ると湿気とかで馴染み合って頑丈になるんだっけ？凄いよね
Hello :]
Which wood, do u know? Cypress?
腐らないようにするためだっけ？
@@user-kf9uk8sr1l 金属が錆びたらそこからなんか腐りそうですもんね🤔
@@squarestar326 日本では、檜、楠、杉がよく使われるみたいです！
man... what a talent?
I know a guy who is a timber framer. Its a similar concept. Wooden pegs and specific cuts and joints are used intead of nails to hold up giant structures. It is a very time consuming and skillfull process. Its pretty impressive work, which makes me like this video even more. Mad respect to anyone who does sashimono. The effort and skills needed to do something like this are insane.
Witch
While the process is definitely time consuming, I think what matters most is the end result. Not only do you get a beautiful design, but also a very sturdy structure. Hard work for high quality will always have my respect.
the quality of wood and steel tools to do that never crossed your mind, only the long work and skills needed
@@cristianmicuYou had a choice how you brought up that otherwise good point. Unfortunately, you chose to be a dick, too.
He meant "which", typo , I assume.@@ecyaj1289
It called “sun mao”(Mortise and tenon) from ancient China more than 7000 years ago
サンマオで作った建築物が中国に残ってたら見てみたい。王が代わる度に破壊する国だから無理か。
@@user-oy1tm9ln2h wutai mountain, foguang temple.almost existing for 1200 years.
Love this. Incredible craftsmanship.
The way it just slides together is just pleasing.
Temples and other traditional structures built in this way have stood for hundreds of years and survived thousands of earthquakes. This is next-level carpentry. MAD skills! #Respect
this is not from Japan, original came from China. In 507 AD in China, there was a great architect called Lu Ban, this buckle is his invention, in ancient China Tang Dynasty, Song Dynasty, Ming Dynasty, a large number of Japanese scholars and architects came to China to study.
They have not, they have had been rebuilt and replaced over time.
Joints like this would be fantastic tabletop art.❤
Not too long ago, they took down a building in Japan that was hundreds of years old and was put together without using even a single nail or fastener.
This ancient construction technique was ancient China in origin, not Japan. In ancient of Tang Dynasty, it was introduced to Japan and Korea, and then became popular there. Actually, this ancient technique is not only focus on furniture, and also used it ancient architecture in ancient China. Until to now, some artisan is still used it for furniture or tiny toys. The ancient technique is named in “Tenon and Mortise”(榫卯）,and it was deigned and created by the ancient artisan - LuBan (507BC).
Nobody cares about the truth.
@@user-is5ct1nk1uSounds cruelty but yes, literally no one cares about the truth.
tbf Japanese craftsmen definitely took the Chinese technique to a much higher level of skill and detail
中国人は手を抜く
日本の職人は手を抜かない
明明是中国的，视频居然说是日本的，大无语
いない使っていない御屋敷があります。江戸初期から何度もあった地震でも倒壊せずに残っている建物です。
現在では集められないような大きな材木を使用して建てられたので、同じような建物を再現することは難しいと聞きました。
学校行事で特別に見せていただきましたが、押し入れに隠し階段があって屋根裏部屋に行けたりして本当に面白かった。
That's actually crazy. My dad has been doing this for years and just said it was normal.
In Japanese culture, everything is art and the perfecting of nature.
this is Chinese culture.
这其实是中国几千年一直在使用的技术。千年前中国人派遣专业人员，从中国去到日本。教会日本人盖房子等技术。这里仅仅提到了 教日本人的其中一个类型的技术 。木工
@user-ie9lm4lp4k Yes, Chinese are also amazing artists. Incredible workmanship. Thanks for the information.
Similar building techniques were done with a lot of early gothic era churches in Germany. Amazing how this stuff is built
In Germany we have similar but way less artistic techniques. I would say it's like the beginner-level of Japanese woodworking.
(Tho these are still quiet strong joints)
@@DangerRanger_not Japanese, just asian in general
@@benzness India, Pakistan, Afghanistan, Iran, Saudis doesn't have such wood workings and they are also in Asia. Instead they have beautiful stone carvings
不，中国有，也许你们并不相信，但这起源于中国，中国的古建筑都是这种技术@@sailingadventurer
And both these nations went on to produce finely tuned cars.
remember, east Asia is sinosphere, pretty much anything you find may be attributed back to China. Just like most of the plants with names like Japonic are actually originated from mainland China
The same techniques are being used since aeons in India, to make doors and windows, every door n window and table etc in our house are made like these without using a single nail.
It's not only Japanese. Alot of other Asian countries used that kind of wood working technique.
This wood joint is called Sunmao. Japanese copied it from ancient china.
And also india.this technology was specially used in Indian shipbuilding.huge ships were built using this same technology that the ancient ships could carry huge loads and usually lasted for more than 100 years.the British destroyed the Indian shipb uilding.
@@yanyanz3011 and now China copies everything from luxury brand clothing and handbags to cars.
they copied
All over the world too
Woodworkers all over the planet admire Japanese joinery.
Not Japanese. They learned this from China 😂
Thats the real woodworks ❤❤
This is actually a ancient Chinese technique, they use to build the rims of houses out of only wood and it would hold up quite well too(it’s not Japanese, it’s chinese, but Japanese still use this some times cuz they got earthquakes)
shill
@@daniflorin5350
He's merely stating a fact, what's your agenda? These master craftsmanship comes from Chinese originator called Lu Pan.
You,re right. Love to watch Grandpa Amu...Chinese.
@@daniflorin5350 thing japanese:😮
Thing any other asian country: 😐
Ya SHABI CCP
コメントを見る限りでは色々な国で昔はこのような方法が使われていたみたいなんだけど、日本の凄いところは今も使われているって事なんだよな…
Hello. I can imagine how long the intensely and rigorous training is. Must be 10 years or more
東日本地震で日本建築は倒壊が証明された。同じ場所のアメリカ式は壊れない
@@user-tr4ht6ww2l東日本大震災レベルのクソデカ地震なんて昔の時点で想定してるわけないよ……
@@user-tr4ht6ww2lはい❤
@@user-tr4ht6ww2l別要因不確定要素が多い中で決めつけるのは良くない。ソースを持ってきて欲しい
That applies to every form in there cultures. From tea ceremony to wood working
江戸時代の技術です😊
Beautiful workmanship.
Of course this should be highly esteemed and preserved. Such skill of art!❤
Thank you for sharing Japanese craftsmanship. I hope we can bring it to the future and more.
木組み。日本の伝統技術です。宮大工は本当にすごい。
中国からの技術です
@@user-K.Jって事は大元はインドか
中国の物は中国の物、お前等の物は俺の物😂
@@user-ve8vf7jl5s 何で？
@@user-K.J日本で派生した独特なものです。
No one should call themselves a master carpenter till they can do that.
Then like 2 thousand people worldwide are master carpenters because is top tier stuff.
我想知道和榫卯结构有差别吗
@@chalnervassor9430hence the "master"
Most can do that, it's the thinking and coming up with designs that wont break or come off that's the hard part
@@chalnervassor9430 I learned this in a carpenter course for beginners. It's nothing special. It was required to complete the course and I did it quite easily.
All of theses, Smart technique, seemless joints and precise cuts are made by heart and dedication. This craftmanship is really highly appreciated.
Japanese creates brands ❤
Asian (Chinese, Japanese, Korean, ...) are fantastic in manufacturing, literally. 👌👏
Ahahaha china. .. the place with tofu dreg construction and who produce absolute crap.... Look up what's happening with the three gorges dam. It IS going to collapse. It's just WHEN. And they KNOW it'll kill tens of MILLIONS in just hours. It's almost collapsed in every rainy season since 2020. They produce the cheapest crappiest version of everything else. They don't innovate or build anything with skill. Their aircraft carriers are splitting apart and can't even leave dock. And their "space" program is windows 98 level graphics. And their getting most of their rocket ideas and solutions from all the data that space X makes public and all the camera views of the rocket in flight. I kinda wish Elon would make less things public 😂 but hey they'll screw it up like everything else. ☠️🤡☠️🤦♀️🙅🤷♀️🤣
Indians?
@@36jack19 Nope,
Edit : No need to be angry at me the comment is clearly talking about "EAST ASIA" that's why I said nope 🙄
@@Ba_rock0bama you know nothing bro 😂😂
nope@@36jack19
I've been working with wood for over 30 years and this type of wood working is just pure amazing very strong beautiful all same time
Fascinating wizardry in their craftsmanship is mind blowing! 🤯 ❤
I could literally watch this all day. Incredible intricacy and artistry
Great inspiration and great craftsmanship .
What's the inspiration you mention, man?
Originally from china, Chinese have use it for thousand years
average TikTok satisfactory:
This is combined precision with science, math and artistry.
This was imported from Tang dynasty, ancient China.
Imported from India to China.
@@abhishekpasThere is no traditions of India using all sorts of furniture. The Chinese for hundreds of years have their meals on proper chairs and tables for their meals.
Today many Indians still seat on floor using their fingers for their meals.
Many centuries old Chinese furniture can be found in world's museums. But not from India.
@@jacku8304 we have tradition to eat on small table called as pidha made from wooden. Still it is in use. We still in villages make furniture with a locking system. It's widely prevalent even today.
@@abhishekpasSmall simple low table but no chairs. Simple locking system but not the mind taxing sophisticated joinery of East Asia.
So where is the tradition or culture of Tang dynasty in current China? Current Chinese construction technique seems fragile.
The tea cabinets and other crafts that the Japanese brought back from China 1,300 years ago were Karaki Sashimono, from which various styles were born in Japan. However, in the first place, the technique of building joinery called wood framing was established 23,000 years ago during the Jomon period.
I love this stuff
the Japanese art are so magical,.
Origami, Bonsai, Sashimono wood craft and Anime
and also hentai
But this is Chinese
The only thing original is anime bruh
Yeah @@user-oe9ov4dv4b
@@edyerzs W
In fact, this is a process invented by the Chinese. The Chinese had mastered this method called "mortise and tenon technology" to build buildings 4,500 years ago.
Actually Japan acquired this technique from China. And China is also not the only one who invented it. Similar technique has been developed in elsewhere such as Europe and their stave church. Ancient China built enormous wooden constructions like temples and giant towers using this technique. And what unique to China is there's a technical treatise in Song Dynasty called "菅造法式” comprehensively and scientifically demonstrated their wood building technology.
Okay? They just showed Japanese way
@@Re-xh4ox it’s like you saying the Newton's first law in Japanese way, there’s no such thing
@@Re-xh4ox Japan invented Japanese English, so English is Japanese?
This is really cool!!!!
Not only Japanese but Korean’s old palaces are also constructed using that method.
Bravo 🇯🇵 Japan
🇵🇱❤️
日本には釘を使わず神社仏閣を作ってきた宮大工さん達がいます
それは日本が誇る職人技です
As a Chinese we are happy Japanese loves this technology, but it would bring shameless for you guys to call this Japanese technology
なんか...気に入ってくれてるみたいで嬉しいよ。
ありがとな。
Yes, aesthetically, it is the best craftsmanship
Skill like this is almost supernatural.
Just brilliant, and beautiful. ❤❤❤
embarrassingly these are invented in China and passed on to Japan during the Tang dynasty.
That's correct, This wood joint is called Sunmao. Japanese copied it from ancient china.
Now look at China. They got Walmart shelves loaded with a bunch of junk.
Then everything from architecture to common ramen is from China. You faiIed to preserve it so we claim it today.
Chinese engineers would be hired since B.C. to participate in the construction projects of the kingdoms in Korean Peninsula, and after the technology spread there, Korean engineers took part in Japanese architecture. For example, "Shitennoji," a famous Japanese temple, was constructed in 578 by three Baekje engineers(reference, Nihonsyoki) They also built the famous temple, "Horyuji" and established a construction company called "Gongogumi" for 1,400 years.
Your ancestors developed great cultural skills and spread them to neighboring countries. That is a good thing, but if you devalue another country's use of that culture as nothing more than replication, you will not be able to gain the dignity and respect that the former Chinese dynasties received from neighboring countries. It is a little mean to ask them to repay their kindness in the past.
This technique was vastly used in the East Asia, originating from China. It may vary in places, but was very commonly used not only in Japan, but also in China, Korea, India, etc.
Also, though it may come from a different origin, there were similar construction techniques in Europe too.
Just trying to say these techniques aren't native nor original for Japan. A lot of these stuff can be seen all over the world, and especially in Korea, where these techniques were really put into hand and mastered, then were passed on to Japan.
But it is unique that Japan still uses and polishes these techniques to the modern days, thanks to them being vulnerable against frequent earthquakes. Wooden buildings noticeably withstand better against earthquakes, and because of that nature, Japanese have really mastered this technique and is probably in the best position right now.
yes
You mentioned India here comes the racist comments
Correct. In China furniture, such as tables, chairs, and chests, were created in this fashion. Even temples and palaces were constructed, using these methods,which never saw a single nail.
@@harisankar1932 true, for some reason whenever someone mentions the word, there is a special form of racism which is very dumb as well since Indian is even less heterogeneous than europe.
@@harisankar1932 Honesly, I don't like nor like seeing people spilling racism around, but there are a lot of Indians who say everything they have is superior compared to others and just makes people want to be 'that guy'.
You know what they say, ultranationalism is just as toxic as racism.
fun fact is that it not just japanese do this, we also do these long time ago too.
Probably the best thing to learn from Sashimono is that wood expands due to cold weather and these very tiny gaps are nonexistent overtime due to this making the structure as if it was whole making it very stable, durable and long lasting if attached correctly.
My great grandfather used to make wooden furniture by using similar techniques. It's been about 70 years and two of his best creations still exist
but it's chinese wooden art and technicals
That must be satisfying.
I love this Sashimono technique 😍❤️
creating seamless joints is a craft passed down through the generations in my family as well
Japanese craftsmanship is just next level. No wonder everything they make is quality.
This is literally just a dovetail joint.
@@mikuisgod4591Dude…. Don’t ‘just’ these pieces of art-joinery. Almost anyone can make a dovetail today. But these joints have so much intricacies they are well beyond the capabilities of I guess more than 90% of woodworkers. And I think I’m guessing that conservatively.
@@PatNetherlanderIf you want to lecture about geometrical aesthetic, there are some cathedrals on Europe instead of carved wooden joints.
Even the women
You probably don’t remember, but back in the ‘50s, the label ‘made in Japan’ indicated that the item had very limited durability. Now, it’s a sign of quality!
京都の清水寺が釘を1本も使わずに建立されたと言う事を、以前、旅行で知り凄く驚いた事を思い出した。日本の宮大工の技術とか発想には尊敬しかない。
中国の真似をしただけで何も不思議はありませんよ。
@@user-K.J天安門事件！！！
@@ManiaKanipan
？正気か
@@user-K.J天安門事件！
《》《○□□|.¡~
Beautiful
Japanese people know how to take things to the next level.
Can’t beat hand crafted traditional trades.
日本の先人の方々の知恵には感動しかありません。
Your ancestors learned from the Chineses, denying it make you thieves
This is not Japanese, it's Chinese, including your language, guess how else people can read it
@@user-ob5fk1bo6v適当な事言わないでくれる？普通に日本語でしょ。
こんな事を言う人が居るんだね
@TruthSeeker-ql1hhlol shut up bro, literally no one cares
I wonder if you could do similar with different forms of metals like aluminum and steel to make joints that are as strong as a weld without having the weak points of a weld like the surrounding material being compromised from an arc mark
They do, the metal ones don't have visible edges in most of them. This has been done with stone as well.
Absolutely they can!
Bet you could do the same with 3d printed plastic.
Type ramappa temple or 1000 pilalr temple ,
With stones the whole magnificent temple is made with this 3d jigsaw method