P0702 fault grand cherokee 2.7 crd gear selector how to fix remove replace shift knob removal
Vložit
- čas přidán 10. 09. 2024
- How to fix 2.7 crd gear selector grand cherokee p0702 fault n 10 minutes. The problem was fixed 100% and all was perfect. I sold the jeep 2 years later and had no problems with it. Part bought from twinflexusa via ebay. Please watch second video for full explanation of new part and garage I use. (I have no financial interest or affiliation to either company, although I do wish I was connected to the garage I use as they are such a bunch of great blokes). Other garages full of great blokes are also available. Here is a link to twinflexusa feedback page. you can access his items for sale from there. feedback.ebay.c...
Thank you, that's great.
I had a problem with this on my jeep, no drive but can go in to reverse.
The nice guys at Jeep helped but i had to find a cheaper way on fixing the problem.
Their team quoted about £8-900 but after someone mentioned on another site, i could pick up the part and do it myself.
I'm not a mechanic ether, but can put my mind to most things.
I got the gist of how to replace PCB board.
Will have a go when part arrives tomorrow.
Cheers
Can you explaın how u solve it?
Great video! Thank you for sharing your experience with us.
I was in a street with a dead end… I was turning around from 3 moves and surprise… my Jeep wasn’t shifting anymore…I was looking on CZcams and I found your video… 🙏 thank you
Could you solve the problem with this? Thanks.
Is there any other way to take off the shifter knob my four wheel hi/lo knob does not want to come off
Board was toasted, my brother ordered a new board at a cost of around £300 expecting it to fix the issue but it didnt. Still stuck in limp mode and the 0702 code is still present. Stupid modern electronic crap. :p
I have now part ex jeep for mondeo. The 2 years I had this pile of $!%# cost around 7k to buy and keep on the road. Go 1k part ex. Will never buy a jeep again. Shame u dont live in Northampton the garage I use is amazing and has an ex jeep mechanic working there. Have you had ecu remapped? Have u tried a gallon of petrol and a match. Wish I did. Sorry could not help ur situation and best of luck.
Nope, ecu has not been remapped. He has had the jeep around 10 years now and its been pretty reliable'ish, 247000 miles on the clock so he has had his £££ out of it i suppose. Apart from the one time when one of the injectors decided to leave the head. :D £500 bill having that sorted. He has ordered a transmission plug connector thing as that wire you mentioned was all oily, read that could also cause the issue, was only about a tenner so i will change that on Monday, not holding much hope on that tho. Failing that then he will probably take it to the jeep specialist we got down here in kent.
Wow he has been so lucky. Widh mine was that reliable. Had the black death on mine. All 5 injectors replaced. Cost £1250. Had to drop the engine to get 2 of them out. Loved driving it though.
I read you could cut a hole in the scuttle panel to get to the two rear injectors. I think his is sorted now anyway. We done transmission oil change as he was getting a gear slippage code also, new pan seal, filter and loom plug where it was leaking from, he must of only had about a litre in there and it was all black. Other thing, he was wiping the codes with the ignition on and the engine management light would come straight back on, wiped with engine running, light goes off. Seems to be running sweet as now and no error codes apart from the AC, but thats nothing. So touch wood and fingers crossed. And cheers for this vid, was very helpful.
I need to do you a question, when you get the error with the car computer, could you fix it?
Because on my jeep the mechanic literally could correct the error
start the truck and drive it a little bit but then the error comes back again..
Mine won't change out of first gear when driving, is this the same problem you had and if so did this fix it, thanks
Very good Aldin
Hi, great video. What was the presentation of your transmission fault? My Grand Cherokee 2002 2.7 WJ loses power from the transmission intermittently (not the engine) and then when the vehicle comes to a complete stop, I put it in park and then back into drive and it works fine. I'm also thinking it's the ECU?
Could you solve the problem?
I have a very simple question. How can I remove the knobs from the shift levers?. Are they embedded in persion?.Thank you
I used a pair of mole grips. Clamp them to the shaft and use a screwdriver to prise the knob off.
Thanks so very much... You saved my GCs life
despite your car having that code p0702, how was it behaving? was your gear shifting well?
@@elijahkimani7423 bit late to comment but mine clunked into gear, the whole car lurched and would not change out of first.
@@iball310369hello iball, the error in your case was just P0702? Or were other errors? I appreciate your answer.
Great video, really helpful, thanks a lot :)
+RUDY 102 I could not find any videos online to help me so I shared my experience. I am really glad it helped you. It really is just a 10 minute job. I hope you get your jeep sorted. Allan
good man good video ,it helped me out ,but ,you went around the block to test drive it but never came back ,what was the outcome of the new part fitted ,is it safe to spend 500$ buying it or what ??
It was perfect. Really good buy. Didnt have to do anything with mine. Just plug in and go.
What is te part number?
Hi had the same issue and followed your steps which worked a treat
But tried to clean it all up with electrical contact cleaner instead and when I plugged it back in the jeep
The selector does nothing
Cannot select any gears nothing?
Obviously I've plugged it all back in
But it's just strange as if anything it should be the same or a little better.
Do you have a link to the eBay seller?
Thanks
+Richie Co Sorry for the late reply. I do not generally check youtube messages as I only did this video because I could not find any help for my problem anywhere and wanted to help others with the same probleme. I have a link to the sellers feedback page. once on you can click on items for sale feedback.ebay.co.uk/ws/eBayISAPI.dll?ViewFeedback2&userid=twinflexusa&ftab=AllFeedback&myworld=true&rt=nc&_trksid=p2050430.m2531.l4585 I really hope you get this sorted as I understand the frustrations this causes. Once again sorry for late reply. If anybody else needs a question answered please email iball3103@ntlworld.com Allan
👍
Just pull it off with a screwdriver. Lol, I am a 100kg beast of a man and that thing is stuck as hell. Pulling, tools nothing works. Thinking about cutting it open.
i didnt find second video
Sorry video was deleted. Car run perfectly. Part exchanged car not.long after this coz it was a money trap. Is no longer on the road. Check mot web site SM53 FLW. These jeeps are a money pit.
@@iball310369 Provided the gearbox electronics and the injector seals are replaced, why would you say they're a money pit? I'm just wondering because I'm coming from a landrover discovery that has similar common problems but perhaps more numbered (coolant, head gasket, injector seals, gearbox electronics, abs lights, prop shaft, watts linkage, and more).
@@ptr6092 proviong the gearbox electronics. And the injector seals are replaced why would I call it a money pit. Gearbox electronics at jeep £900. Injector seals need the engine dropping. £1500. For a car worth £2000? Get real. That is without me replacing most of the suspension and track arms etc at a cost of about £800. Within 6 months of buying the shit heap I spent 1.5 times the cost of the car to keep it on the road. Go to mot checker on the uk government website and put in sm53flw and look at the problems this car has had. You have no clue what you are talking about
@@iball310369 Chill out, it was a genuine question. You can replace seals without dropping the engine and new electronics can be purchased for £200 now. I understand what you're saying but I'm wondering if a good low mileage example might be worth it when you consider the problems on other similar 4x4's.
@@ptr6092 apologies for being a bit over the top but the 2.7 crd has a mercedes engine that is renouned for the "black death" which results in the injectors needing replacing. It is a shit engine plagued with problems. You literally have to drop the engine to replace them. Mine was in the garage for 3 weeks cos one of the threads needing re tapping costing an arm and a leg as it is a specialist job. I also had some of the bodywork cut out and welded back to aid with the injectors closest to the chasis I will never ever consider buying a jeep again. A costly experience. I had the car for 2 years. Overall with the purchase and repair costs it stood me in for around £8000 maybe more. (I had prblems with just about everything from fuel pumps to drive shaft to suspension to seatbelts locking and not being able to be used). I needed a connection on the battery to stop the power to the car because it would drain overnight. I traded in for £1000. Absolutely gutted.
My car will run but On one speed you knw my gears don’t change
Take a look at the circuit board. If it needs replacing it will be quite obvious.
aldin 3103 well that’s something I really don’t understand sir sorry can you explain please I really need this car working
aldin 3103 if you are on WhatsApp please contact me on it please +2203924770
@@sboysallah6601 it is probably the circuit board that is under the gear selectors. You will need to get access to it to take a closer look. If it is all bubbly then it may need replacing. I am not a mechanic so can only advise on how my one looked.
aldin 3103 okay my bro I really wish I can talk to you on a video call you knw to show you