@@RC4ever I bet you didn't think it would fly as well as it does and is a lot more fun then you expected. My flying buddy put 90mm fans in his, as he upgrades everything, but even he said it wasn't necessary. Put the Mig fans in mine and it was still almost too much. His looks a little odd flying around full throttle while the decals are being stripped off. 🤣
@@hughwiedman9711 Decals being stripped off is what I'd expect from that upgrade, LMAO. This one is already silly fast if I open throttle too much. I fly most of the time at idle and low throttle settings, otherwise the jet accelerates so much it looks anything but scale, lol. But still probably a good idea to upgrade to larger EDFs to further improve efficiency. And heck yes, I definitely expected such a jet to fly for longer (greater aspect ratio wings are expected to give a better aerodynamic efficiency), but the difference is quite ludicrous! :D
AG RC4ever the 🐐 Nice to see a new warbird in your collection. Can’t wait to see your progression with this iconic Thunderbolt.You just inspired me to properly repair the front landing gear on its eflite 64mm baby brother.
Thanks! 🥰 The next video is going to be a lot more extreme, that I can already tell you, hehehe... keep tuned! Get ready for A-10 flatspins and aggressive low flight! lol 😁
Got the same bird. Whats great about it is thatit will still be bad ass in 20 years. FreeWings model is far superior to the competition when it comes to foamies.
You got that thing dialed. This weekend i plan on the maiden. Im at book rates but any info you can share besides "send it" would be nice. I call them General rates
@sambuvca22 Ah, well, I wouldn't say I have it dialed in yet... certainly not until I move the CG further back and replace the nozzles by some 3DP ones with the correct thrustline. Be careful when adding thrust, if you do it too suddenly, particularly at low speeds, it will ditch the nose badly. As for throws, I just like to go full throws everywhere with lots of expo to soften the reaction near center stick. ;) Also recommend to install a softer spring on the nose gear to avoid bounces during touch down, they are nearly impossible to recover from otherwise! Keep speed up a bit just in case during the final approach.
Incredible flying! I am still waiting to maiden mine. I’ve flown the FMS Futura 80mm, Freewing Venom, and Freewing 70mm 16. Is that sufficient to step up to this?
Thanks! Yes, I think so! You should have no problem with this one, it's very noble in the air. Just be careful that the jet wants to pitch down when you add throttle. It would pay off to replace the nozzles by some 3D printed ones with the correct alignment. One way or another, don't go from 0 to 100% throttle too quickly when doing a low flyby, it could send the plane into the ground! ;) Also, flaps help a lot slowing the model down when landing.
The A10 would have helped step into an F16. Setup and look for the working CG consensus online. I think ArthurRc has a good setup video for it on YT. You'll have no problem with good rates, CG, throttle calibration, etc. It's a warbird with twin edfs. You want the same landing gear type on all three, that's the one update I recommend. And use a little throttle on landing otherwise it'll bounce. Truly a peach to fly!
Yes it is. I don't feel like the jet needs much more power, since I find myself gliding most of the time and have plenty of thrust for verticals and more speed than necessary for a jet like this when you fully open throttle... that said, I know from people in RCG that modded the jet to 90mm EDFs that they gained thrust and efficiency. So it does indeed make sense to upgrade EDF size if you have the will and patience to, but it's not really necessary. What I'd deem necessary is to replace the awful stock nozzles by some with a properly aligned thrustline. Each time you hit the throttle this thing wants to nose down badly.
Nope, the jet is all stock. Didn't even bypass the MCB this time. The only considerable mod I'm using is to power the stock UBEC from a separate 2S 850mAh Li-Po instead of from the main battery packs that feed the EDFs.
@@ArthurRC Thanks! This one flies so easy, it helps make the flights look good too! :D Too bad they messed up the thrustline, but's that's an easy fix I guess... ;)
😮 once again! You manage to make that look like the real A-10 at an airshow- super sweet flight!
Thank you so much! 🥲🫡🫡🫡
Love to entertain! ♡♡♡
Oh Yeah!!???!!! Nice! Excited to see what fun you have with this!
...Coming soon!
Nice scale flight and great video. You can see why pilots and ground troops love this Hog! 🤙
No kidding!
This jet flies really well!! :D
Thanks Hugh!
@@RC4ever I bet you didn't think it would fly as well as it does and is a lot more fun then you expected. My flying buddy put 90mm fans in his, as he upgrades everything, but even he said it wasn't necessary. Put the Mig fans in mine and it was still almost too much. His looks a little odd flying around full throttle while the decals are being stripped off. 🤣
@@hughwiedman9711 Decals being stripped off is what I'd expect from that upgrade, LMAO. This one is already silly fast if I open throttle too much. I fly most of the time at idle and low throttle settings, otherwise the jet accelerates so much it looks anything but scale, lol. But still probably a good idea to upgrade to larger EDFs to further improve efficiency. And heck yes, I definitely expected such a jet to fly for longer (greater aspect ratio wings are expected to give a better aerodynamic efficiency), but the difference is quite ludicrous! :D
Excellent, now if I can fly mine that good I’ll be excited.
:DDDDDDD
sweet plane, cool place to fly, good vid
Thank you very much!! 😍
Buttery… The yank and bank, self proclaimed RC experts on YT should take note.
🥰🥰🥰🥰🥰
Thanks a lot! :DDD
Great flying bro!! Enjoy it’s a great model 😊❤
Thanks Nir!
It's such a fun model!
@@RC4ever for sure! Love mine :)
AG RC4ever the 🐐 Nice to see a new warbird in your collection. Can’t wait to see your progression with this iconic Thunderbolt.You just inspired me to properly repair the front landing gear on its eflite 64mm baby brother.
Thanks! 🥰
The next video is going to be a lot more extreme, that I can already tell you, hehehe... keep tuned!
Get ready for A-10 flatspins and aggressive low flight! lol 😁
Hogworts are awsome 😀🤘 awsome flying buddy 😊
Thanks Frode!! 🥰🥰🥰
This jet truly shines in this size and scale!
Brilliant 👍
🥰🥰🥰
Got the same bird. Whats great about it is thatit will still be bad ass in 20 years. FreeWings model is far superior to the competition when it comes to foamies.
100% !!!
I still consider the old discontinued FW Su-35 to be the best foamie EDF ever made, and that was one of the first they pumped out!
J that was worth the wait outstanding piloting as always!! I hope you’re Russian girls forgive you 😂
Alya's been getting plenty of air time this past week, so I think she should be fine, at least! :p
Thanks!
@@RC4ever Ok just checking ;). btw sweet maiden!!
@InTheTubeDeepRC Thanks!!
You got that thing dialed. This weekend i plan on the maiden. Im at book rates but any info you can share besides "send it" would be nice. I call them General rates
@sambuvca22 Ah, well, I wouldn't say I have it dialed in yet... certainly not until I move the CG further back and replace the nozzles by some 3DP ones with the correct thrustline. Be careful when adding thrust, if you do it too suddenly, particularly at low speeds, it will ditch the nose badly. As for throws, I just like to go full throws everywhere with lots of expo to soften the reaction near center stick. ;)
Also recommend to install a softer spring on the nose gear to avoid bounces during touch down, they are nearly impossible to recover from otherwise! Keep speed up a bit just in case during the final approach.
I'd love for these planes to have that gun sound......
Can be done, with airborne speakers... 👀
@@RC4ever Yes, but i wish it was a part of the pnp...
Incredible flying! I am still waiting to maiden mine. I’ve flown the FMS Futura 80mm, Freewing Venom, and Freewing 70mm 16. Is that sufficient to step up to this?
Thanks!
Yes, I think so! You should have no problem with this one, it's very noble in the air. Just be careful that the jet wants to pitch down when you add throttle. It would pay off to replace the nozzles by some 3D printed ones with the correct alignment. One way or another, don't go from 0 to 100% throttle too quickly when doing a low flyby, it could send the plane into the ground! ;)
Also, flaps help a lot slowing the model down when landing.
Yes!
The A10 would have helped step into an F16. Setup and look for the working CG consensus online. I think ArthurRc has a good setup video for it on YT. You'll have no problem with good rates, CG, throttle calibration, etc. It's a warbird with twin edfs. You want the same landing gear type on all three, that's the one update I recommend. And use a little throttle on landing otherwise it'll bounce. Truly a peach to fly!
@@RC4ever thank you my friend
@@sanexup1038 that’s awesome info awesome. I’ve already got three of the upgraded gear. Thank you!
It’s the 2x 6s Version? Do you think there would be an improvement if upgraded to 130amp ESCs and 90mm 12 bladed Fans…?
Yes it is. I don't feel like the jet needs much more power, since I find myself gliding most of the time and have plenty of thrust for verticals and more speed than necessary for a jet like this when you fully open throttle... that said, I know from people in RCG that modded the jet to 90mm EDFs that they gained thrust and efficiency. So it does indeed make sense to upgrade EDF size if you have the will and patience to, but it's not really necessary. What I'd deem necessary is to replace the awful stock nozzles by some with a properly aligned thrustline. Each time you hit the throttle this thing wants to nose down badly.
Did you replace the stock wheels? Sounds quieter.
Nope, the jet is all stock. Didn't even bypass the MCB this time. The only considerable mod I'm using is to power the stock UBEC from a separate 2S 850mAh Li-Po instead of from the main battery packs that feed the EDFs.
Nice. What is the CG? Thanks
About 85mm
Fuck1ng first 😅 and happy birthday once again 🎉❤
w0000t!!
Thank you Arthur! 🥰🥰🥰🥰
LVL1UP 😁
@@RC4ever Nice job on your 3 flights though 🫡🥰
@@ArthurRC Thanks!
This one flies so easy, it helps make the flights look good too! :D
Too bad they messed up the thrustline, but's that's an easy fix I guess... ;)
@@RC4ever yes you can maybe fix it with a nice free mixing…😇 throttle to elevator ?!
@@ArthurRC Nah, I prefer to actually change the thrustline. I don't like throttle to elevator mixes ;)
...😜👌
😀😀😀