My Projecta Battery Meter BM320 has been working OK but now a message shows "System Idle". I have tried resetting the meter following your instructions but the problem remains. How can this problem be corrected? Thanks, Keith.
On the shunt there is a black and yellow wire to one side and a green wire on the other……. Make sure they are tight, the black and yellow wire not tight will give that faulty reading
@@americian Mine actually does the same thing. Says +32A charging when not hooked up to a charger. I get about 10 mins before % drops to 0% and alarms go off.
My Projecta Battery Meter BM320 has been working OK but now a message shows "System Idle". I have tried resetting the meter following your instructions but the problem remains. How can this problem be corrected? Thanks, Keith.
Whenever I hook up the monitor. It always at +62a charging. Even when the vehicle is off and nothing is charging the battery.
On the shunt there is a black and yellow wire to one side and a green wire on the other……. Make sure they are tight, the black and yellow wire not tight will give that faulty reading
@@uprisingengineering4533 they are definitely tight. :(
And after a few hours it says my battery is back to 0% even though it's a brand new AGM sitting at 13.0v
Might have a defective unit.
@@americian Mine actually does the same thing. Says +32A charging when not hooked up to a charger. I get about 10 mins before % drops to 0% and alarms go off.
@@americian undo it and place it back on again, if that doesn't work ring Projecta bud