GS750 Cafe Racer is back together and looks unreal!
Vložit
- čas přidán 7. 07. 2024
- Finally putting together all the pieces of this 1978 GS750 cafe racer build
My shop:
Website - www.younggunsgarage.ca/
Instagram - / younggunsgarage_
Bike stuff: pic__metalworks
Timestamps
0:00 - 5:55 - Putting it all together
5:56 - 8:40 - New carburettors
8:41 - 10:04 - Gauge & warning lights
10:05 - 16:41 - Wiring the M-unit
16:42 - 19:05 - Final reveal
Contact: pic.metalworks@gmail.com - Krátké a kreslené filmy
Looking amazing dude!!
Love the frame onto the engine rather than engine into frame 🫡
Very nice build 👌🏼 it’s a great feeling seeing everything come together.
Very clean and really shows why we sometimes say less is more
Finally someone who know how seat and Tank should be positioned on a naked bike build! Nice one!
That’s how the gs750 is made.
Your are so focused so concentrated into assembling this GS750 perfectly! Amazing!
simply stunning - great work
THE BEST AWESOME PERFECT AMAZING WORK.....😁👌👍
I am completely in awe. Incredible job.
20 years and I never thought to fit the frame to the engine. I am feeling dumb as.
I was just marveling over this technique myself. 🤔
I couldn’t help but smile when you rolled that front wheel between those forks to install it … and then seeing it all together 😍
Looks fantastic! Great job!
Gorgeously gorgeous gorgeous bike love that clean look I was waiting for this final assembly and now can't wait for you to ride it the first time however I got an idea if you wanna see it works I think if you throw a tiny fender on the rear wheel it will look awesome but I love this build anyways and also nobody had to see your face when you turned the power on first time we all heard the joy in your voice instantly Congrats on this beautiful build again.
Wow, bike looks great! Love the rims.
Awesome video!
I'm putting these same forks on my SV650 now.
Those wheels are awesome.
Nice bike!
Super looking bike. Concerned I didn’t see a torque wrench used once though 😮.
A very comprehensive assembly video thanks. Very jealous of your garage and tools,makes mine look shabby. Great stuff will subscribe.
Excellent work 👌
Great job so far,,looks awesome
Very beautiful looking bike 👍
That looks sick, very much like a ccm with a single sided swing arm and a hefty four cylinder, great work 👍✊
Very nice
I just saw a running 1976 GL1000 for sale for peanuts. I smell a café racer project.
Stunning!!
Bravi bel lavoro complimenti
Nice shop!
Just subscribed. Lovely work, minimum of narration (ASMR). Calming, informative, enjoyable. Thank you.
I build 1/12 bikes. Yours is terrific!
If i were to chose this over a brand new bike...i would still choose this. Realy nice project
what a badass build you killed it!!!
yo this bike looks mad!
Ficou linda! 👍🏼
Can't wait for see it on the road❤
👍👍 Beautiful
Looks great
So clean, instrument panel is stealth tek😁
hidden battery, you can see the carbs,
the rear shock looks good.
the offset rim with brakes inside is great, you are good at this.
Damn 😮
been watching since day 1, cant wait for the test ride video
Nice build.
Sweet
Fantastica!
Exellent, thanks
Nice Custom, so Yeah!
I love motocycle, nice....good luck and sucses for your konten creator👏👏👍👍👍
A work of art. Beautiful
Gravity: **Surprised Pikachu Face**
So simple, yet that wouldn't have crossed my mind if I was the one to assemble it. 👍
looks sweet, just picked up a 99 gsxr750 parts bike so I can pull the front end and swing arm off for my 80 gs750 doubt its gonna come out anywhere as good as this but I'm looking forward to the project it's gonna be.
Amaze...
awesome machine you have created, really enjoyed watchin the build, congrats fella
Very cool, try to balance your bike. With a straight touring handle bar you will seat more upright and it´s perfect for hill climp and to feel front and rear tire grip. Beautifull motorcycle😍😍😍
Gonna do any motovlogs on this epic machine.
Crisp 👍🤞👊🏼
Sick! 👍👍🎉🎉🎉🎉🤘🏻🤘🏻
Awsome
Hola saludos desde Chile!!!
Genial trabajo
Y me gustaría saber... ¿En cuanto esta evaluado el trabajo y la Motocicleta con el resultado final?
Sigan así Da gusto ver sus trabajos
Slick, the frame looks skinny in my eyes, but still a beautiful build.
I haven't watched your videos in a long time... I hope you will always be successful in the future
👍
i'd suggest you to change up the seat it doesn't sit well with everything.. other than that the bike is just simply fabulous the color and contrast of the wheels are insane same goes for the wiring as whole...damn man you did great
u r amazing..
How do those short intake manifolds perform? Longer would give you more torque from what I understand
Big enough motor?
Bad AF bro!
Looks clean,brutal,pur and sexy😊
It's the 10 Crack commandments
Such a brill classic looking bike , next build gsxr 1100 motor, or k1 gsxr1000,.
Then it will go as well as it looks .
Beautifuk build! Inlove the carbed 4 cylinder❤ did u say the forks were powdercoated? I was thinking about serakote?
That is Art right there! 😎🤝
And what carbs are those if you don’t mind me asking please
Keihin CR Racing
Nice clean build, did I hear you say: 'points' ! Electronic ignition sourly?
Are you worried about heat issues with the reg/rec installed above the engine? Amazing work bro
a little but i’ll have to see. gsxr’s have them right next to the radiator so this can’t be any worse
Прекрасная работа! Только я не понял, в чём смысл микро крыла на переднем колесе, от чего оно защищает?!
What kind of wheels are those? Looks cool 😎
Nice one sir o need help for my gs 650g parts head
Gidday from Australia great work mate but i think your front wheel mud guard is to close to the tire if you get a rock stuck could puncture your tire
You may be right there we'll see how it runs. I may have to re-visit and raise it a bit
Hi, I really enjoyed this video, what headlight did you use on this build?, please let me know, I love it, thanks
Headlight is from purpose built moto
So you put a diode going into a "light emitting diode"?
Fastis in '76'!
I wonder if a Yamaha tracer 700 can converted to a motorcycle like Yamaha tenere?
Beautiful work
BTW your front tyre is in the wrong direction
you made me second guess myself, but tire direction is correct here 👍
El velocimetro donde lo puedo comprar bro?
Wait does that swing arm just fit perfectly onto the frame or did you have to fab something
I wish, had to make it about an inch wider to make it fit
Hi mate I’m interested in the build can you send me some info on your bits like wiring and digital with this please whatever you’ve got I’m really happy that you’ve got that thank you
I wish I knew how to do this. I dont even know here to start
What rims / wheel did you use on this bike ?
May i know ?
Thanks
wheels are Jonich
friends how much does it cost for 1 GS750 motor
Not a single torque loading applied?
what is this torque loading? :)
what kind of battery you use on the bike，the battery size is so small ，i need a same one on my bike，she need a clean shape
battery is an anti-gravity lithium ion
Exhaust?
Great build!! But if you grease wheel bearings like you greased the neck tube bearings your wheels would fall off!!!😂 smearing grease on a bearing is not sufficient! They need to be packed.. you can do it by hand just watch a video or get a packer that works with a grease gun….
Ummm not sure if it's was just in the editing but I hope you packed them bearings better that the video shows.
yes bearings are packed well 👍
Killer bike !
What gauge is that?
Gauge is from motogadget
How much?
bro .i have a advise for u ..why dont u try old ducati 748 exhaust setup...u have to mod it..but it will suite your swingarm too.....i know u have already something on your mind for this...but just saying..
I like the twin pipes coming up the side and may do something like that, I'd probably make it a shorty though
@@Benji... .only real petroheads know when a bike starts talking...she wants something gnarly now...
and break some lines ..dont go traditional cafe racer..it will be unique .
where is battery ?
I hid it under where the swing arm mounts to the frame. Good to know you can't see it!
@@Benji... looks great! But what battery do you use? It should be small size
What cute old analog speedometers. Thank goodness my bike still has them. The bike is beautiful, aesthetically beautiful. I wouldn't have put anything digital at all. That's for today's terrible factory bikes
You look freakishly like a guy i deployed with.
I don’t understand why professional people don’t use simple zip-lock bags to pack bearings with grease🤔 Easier, less messy & go from bag the position without a drop anywhere except in the bag😉😎
If you do not now what it means to "do the ton" you should not be allowed to own a "cafe racer"
20 yrs? It’s still a piece o crap dude.
Learn to pack a bearing ...watch a tutorial!
Hope you didn’t spend a lot of money😂. Looks like a stripped down piece o crap that no sane person would ride on a regular basis😳. Seriously?
You basically put an old cb750 motor on a bike with all new custom parts... That's not a cb750 anymore! It's cool and all but easier to just buy a new motorcycle, lol
Parties aren't your thing huh...?