Opel Astra J - 1.7CDTi - EGR Valve Cleaning

Sdílet
Vložit
  • čas přidán 6. 09. 2024
  • #VauxhallAstraJ #OpelAstraJ #EGR #DIY
    #ClaudeTube #ClaudeGarage
    Support the channel making a donation at www.paypal.me/...
    / claudetube
    Please also watch my playlists:
    My panel beater work: bit.ly/2xqE8VC
    Just mechanical: bit.ly/2XikZEO
    My Electrical - Electronics - PC & Car Diagnosis work: bit.ly/2RLwoa8
    PDR - Tools & Jobs: bit.ly/2KRjmaD
    DIY: bit.ly/326Ye5y
    Dash Cam & Traveling: bit.ly/2XGFudI

Komentáře • 105

  • @thegoodsherpard192
    @thegoodsherpard192 Před 2 lety +3

    Oven cleaner is the best for intake manifold Egr valves it foes clean effortlessly been using it over the years

  • @victorianodelgado3746
    @victorianodelgado3746 Před 3 lety +18

    Hello, congratulations on your videos, I have a question, how many km was the engine when you cleaned the EGR

  • @igor_s512
    @igor_s512 Před 6 měsíci

    multumesc bro pentru acest playlist e foarte folositor nu ai idee

  • @namathismendy9348
    @namathismendy9348 Před 4 lety +1

    Thank you for sharing this video

  • @ClaudeGarage
    @ClaudeGarage Před 4 lety +4

    La toate masinile diesel trebuie facut acest lucru. #ClaudeGarage

  • @danshtyrbu4646
    @danshtyrbu4646 Před rokem +1

    Bravo

  • @timreichmann8799
    @timreichmann8799 Před 4 lety +6

    Does every 1.7 CDTI or diesel engines in general have this problem? Or especially when you drive only short distances?

  • @Gary_Sandhu
    @Gary_Sandhu Před 4 lety +1

    Thank you, I got same car 12 plate....

  • @fantazjuszulanus1
    @fantazjuszulanus1 Před 3 měsíci

    Legend 🍺

  • @anidoganidog3251
    @anidoganidog3251 Před 4 lety +1

    Odlicno odradeno .bravo!!!!!!

  • @davidebaldin5
    @davidebaldin5 Před rokem +2

    Thanks for the video!!! Complete and very useful! Can you tell me what sealing paste did you use? In the video (at min 7:18) I can only see the number 2095... Thanks!

    • @dc3763
      @dc3763 Před 4 měsíci

      Same question :D EDIT: Wepp 2095 Schnell Dichtung

  • @rabie3371
    @rabie3371 Před 3 měsíci

    Merci pour la vidéo
    J'ai une question par rapport le produit que vous avez utilisé c'est quoi et pourquoi ?😂
    Merci 😊

  • @fastenboalbus4997
    @fastenboalbus4997 Před 3 lety

    merci claude

  • @technocris1
    @technocris1 Před 2 lety

    Good job !

  • @02boaman05
    @02boaman05 Před 3 měsíci

    Top !!!!

  •  Před 4 lety

    super awesome video my friend👍

  • @radimkrikava
    @radimkrikava Před 2 lety

    good video....thank you..

  • @cristianjsola8483
    @cristianjsola8483 Před rokem +1

    Hola Claude que tal? Le comprobé lo calentadores y me dieron una medida de 0'6 todos. están bien o hay que sustituirlos.?

  • @naumidec
    @naumidec Před 4 lety +4

    Great video, I was planning to do that for a while but was not confident enough to do myself incase somehing goes wrong,It looks pretty easy on video though, Did you use any lubricating grease before putting all metals back. Thanks

    • @ClaudeTube
      @ClaudeTube  Před 4 lety +1

      Thank you for the appreciations. No, instead you need a sealant.

    • @rauldubina
      @rauldubina Před 4 lety +1

      @@ClaudeTube Salut, ce tip de sealent ai folosit la urma pentru a sigila acea piesa metalica si unde se poate gasi ? Multumesc!

    • @allzd6521
      @allzd6521 Před 4 lety

      @@ClaudeTube hi Claude thanks for video, what selant did you use or what would you recommend?

    • @mbz4652
      @mbz4652 Před 2 lety

      @@allzd6521 Did you find an answer to your question?

  • @user-fv6qr1fm9p
    @user-fv6qr1fm9p Před 11 měsíci

    Both my new gaskets have a lip on one side. Please confirm if the lip goes engine side or EGR side. Thanks

  • @hare_mne6967
    @hare_mne6967 Před 3 lety +1

    Hello, which chemical you used for a thoroughly cleaned ERG brush. Thx you

  • @Irzanto01
    @Irzanto01 Před rokem

    Thanks, but after this code 84, do you know to fix it. Thanks

  • @zoglo71
    @zoglo71 Před 2 lety +2

    Круто! А сколько времяни занял весь процесс, и какой герметик вы использевали? Заранее спосибо.

  • @fcojaviersanchez5172
    @fcojaviersanchez5172 Před 3 lety +2

    Buenas tardes, gran video que es muy útil, una pregunta ¿que sellador de juntas utilizo? Gracias de antemano y un cordial saludo.

  • @louisloffelsender3283
    @louisloffelsender3283 Před 4 lety +5

    Hi, what sealant did you use for the metal plate under the EGR Valve?

  • @theluca9500
    @theluca9500 Před 3 lety +1

    Damn EGR!!!

  • @francescostrano8314
    @francescostrano8314 Před rokem

    ciao per caso ti e' capitato di risolvere problema astra j 1700 ----corrente bassa alle candelette--- ho gia' cambiato candelette e centralina

  • @aleale941122
    @aleale941122 Před 4 lety +1

    Che sigillante bisogna utilizzare per richiudere il collettore sotto all'egr?

  • @mohammedayaz424
    @mohammedayaz424 Před 3 lety +1

    Hi pal very good video i will be doing mine soon what sealant did you use to join the air intake back please let me know thanks

    • @ClaudeTube
      @ClaudeTube  Před 3 lety +3

      Something like Gasket RTV Silicone Sealant.

  • @Andrew-yh3zo
    @Andrew-yh3zo Před 3 lety +1

    если чистить, то сняв впускной ресивер, там вихревые заслонки!

  • @scott-cr3sw
    @scott-cr3sw Před 2 lety

    By cleaning this would it stop black smoke coming out

  • @steveromeocars
    @steveromeocars Před 2 lety

    Top Video. Musste man die Drosselklappe nach der Reinigung nicht mit einem Diagnosegerät reinigen?
    LG

  • @ugunskrusts7761
    @ugunskrusts7761 Před 4 měsíci

    Autor, kāpēc neatbildi uz daudzajiem jautājumiem?

  • @romeo2pc244
    @romeo2pc244 Před 4 měsíci

    Engine check light after I clean egr

  • @Davemovar
    @Davemovar Před rokem

    Szia! Szuper a videó! Lenne egy kérdésem, bekem is van egy 1.7 cdti j astrám. Napi szinten regenerál a DPF úgy, hogy mûszerfalon nem mutatja. Részecske szűrő kompletten ki lett cserélve vadi újra és így is. Szerinted mi lehet a problèma?

  • @peterv8622
    @peterv8622 Před 2 lety

    what kind of agent is in the cartridge with the inscription 5602

  • @francescovalluzzi1136
    @francescovalluzzi1136 Před 4 lety

    Bellissimo video complimenti, ma volevo sapere che tipo di prodotto usi per pulire il tutto ?

  • @benjaminv.8602
    @benjaminv.8602 Před 3 lety

    Hello Claude I have a video where I try to start the car and some smoke appear very close to the ERG I think that it's name Cooler from the ERG.
    Do u think that cleaning the ERG will works? Can I send you the video and maybe yiu can give me some advice, thanks in advance.

  • @christianpiludu55
    @christianpiludu55 Před 4 lety

    Ciao, complimenti per il video.
    Noto comunque che il motore esterno é piuttosto pulito.
    Se lo lavi come fai?
    Lo asciughi in punti particolari?

  • @moussinobied8782
    @moussinobied8782 Před 4 lety

    Brilliant
    Need to know faults
    Too many sensors
    And very hard to diagnose
    Could be anything

  • @kapek13
    @kapek13 Před 3 lety +1

    Nice job 💪💪I'm also going to clean EGR. Please tell me, where should I put the sealant? centrally on the edge (egr intake) or on the outside?

    • @familyman831
      @familyman831 Před 2 lety

      Did you clean your intake aswell ?

    • @mbz4652
      @mbz4652 Před 2 lety

      Did you find the answer to your question? Also do you know which sealant to use?

  • @Nemesisx1974x
    @Nemesisx1974x Před 4 lety +2

    did you replace the O-ring were the big cover was ?.I want to do my self but I'm worried the O-ring will brake

    • @evieemaya88
      @evieemaya88 Před 3 lety

      Hey Colin , when you say the o ring for the big cover, can you give me a time stamp in the video so I can see where it is?

    • @Nemesisx1974x
      @Nemesisx1974x Před 3 lety

      7.13

    • @louisns
      @louisns Před rokem

      You should use a sealant like Reinzosil, I don't believe there is actual O-ring there.

  • @eugencatalin2930
    @eugencatalin2930 Před 3 lety

    Salut. Am și eu un Opel Astra j identic cu al tau. Mie mi se pare că se aude un țăcănit in zona egr pompa vacuum , ai idee de la ce ar putea fi. Multumesc

  • @goa904
    @goa904 Před 4 lety

    Bonjour quel est le joint que vous enlevé et remettait en tube sur la partie inférieur que vous avez enlevé svp 😊

  • @razvanm.9609
    @razvanm.9609 Před 3 lety +1

    Salut. Cati km avea masina la momentul lucrarii? Multumesc

  • @todormircea2675
    @todormircea2675 Před 2 lety +1

    Salut, foarte fain, clipul și explicativ. Apropo ce părere ai despre acesta motorizare 1.7 cdti? Sunt fiabile? Cât sunt de economice? As vrea sa iau un Astra sau Zafira de 1.7

    • @ClaudeTube
      @ClaudeTube  Před 2 lety +1

      Salut. Multumesc pentru apreciere. Motoarele de 1.7 sunt ok ele ca motoare insa, au foarte mari probleme cu regulatoarele de presiune, mai au probleme cu injectoarele (insa nu mai mult fata de alte marci). Astra J mai are probleme si cu celebra cutie M32 care se pare ca nu este bine proiectata pentru acest motor, probleme mai sunt si pe partea de caroserie unde usile ruginesc in partea de jos pe partea dinspre interior. Mai sunt ceva problemute si pe la suspensie (nu mari). Una peste alta, am avut Astra J dar nu mi-as mai lua.

    • @todormircea2675
      @todormircea2675 Před 2 lety

      @@ClaudeTube mulțumesc pentru răspuns. Aceste probleme se găsesc și pe modelul Astra H?

  • @georgenica2185
    @georgenica2185 Před 3 lety

    Salut! Am vazut clipul, insa nu ai aratat cum ai pus la loc admisia sau furtunul ala care pleaca de la turbo. Am mari probleme in a-l pune la loc. M-am chinuit cam 1h 30 min si nu am reusit sa-l pun la loc. L-am pus cam 3 sferturi la loc si mi-am bagat p..la. Am sa încerc maine sa schimb garnitur aia de gura si sa pun alta un pic mai mica in diametru, ceva gen camera de bicicleta. Am vazut ca unui au facut asa. Cam ce recomanzi?

  • @madlex456
    @madlex456 Před 3 lety +1

    Salut! Cu ce ai curatat EGR-ul, cu benzina? am incercat sa vad ce solutie ai in lighean dar nu pot sa imi dau seama. Multumesc ?

    • @ClaudeTube
      @ClaudeTube  Před 3 lety +1

      Salut. Eu am folosit benzina fiindca nu aveam altceva in acel moment. Sunt insa solutii mult mai bune.

  • @adyanaadyana8027
    @adyanaadyana8027 Před 3 lety

    Salut, ști dc la pornire motorului pornește ventilatorul de la motor? Mulțumesc

  • @trevhib
    @trevhib Před 4 lety +2

    Excellent video. What cleaning solution did you use?

    • @ClaudeTube
      @ClaudeTube  Před 4 lety +2

      Thanks. Brake cleaner.

    • @trevhib
      @trevhib Před 4 lety

      @@ClaudeTube Thank you Claude. I did this job today, although I decided not to remove the inlet manifold top. I don't think it had ever been done, 85k engine. I know the improvement is going to be significant.

    • @palmer6933
      @palmer6933 Před 3 lety

      Truck wash works better

    • @trevhib
      @trevhib Před 3 lety

      @@palmer6933 I think you mean TFR (traffic film remover). In the UK that stuff has been watered down (or rather the chemicals in it have been changed to make it safer or more environmentally friendly). It can barely clean bodywork now, let alone remove caked up carbon and oil from intakes.

    • @AdamSandor-gf6ss
      @AdamSandor-gf6ss Před rokem

      @@trevhibI'm also just getting it done now on my 1.7 cdti 130, also 85K and never been done. After drl bulb change I cleaned the map sensor in the back and when I looked at the EGR I wasn't happy...

  • @IosifCr
    @IosifCr Před 2 lety

    la partea electronica se poate face ceva reparatii ? Daca e sa cumpar altul nou, ce recomanzi? Ce producator?

  • @alexandru-iulian.morosanu3328

    Salut! Cum ai dat racordul de la filtru de aer jos?

  • @geriszon92
    @geriszon92 Před 11 měsíci

    Szia! Mivel tisztítottad meg?

  • @rebeccaviolet48
    @rebeccaviolet48 Před 4 lety

    Bonjour ces la miséré a faire je suis même pas arrive a enlever le tube et le grand cache impossible de l'enlever

    • @guillaumehamain2496
      @guillaumehamain2496 Před 3 lety

      Il faut retirer le bouchon de remplissage d'huile avant 😉 et tirer, ça vient tout seul.

  • @0121Shotz
    @0121Shotz Před 3 lety

    Great Video! Do the petrol versions have EGR valves and if so where are they located

  • @careareobricheta9175
    @careareobricheta9175 Před 2 lety

    Salut,am si eu nevoie de ajutor.Inainte sa am permisul stateam in parcare cu motorul pornit si turam motorul si dupa plecam si dupa ceva timp se infundase EGR la masina.Ceva recomandari cum sa fac sa nu se mai infunde?Sau cam cum sa conduc masina,la cate rpm sa schimb vitezele(detin un opel astra j 1.7cdti

    • @careareobricheta9175
      @careareobricheta9175 Před 2 lety

      Sau cum sa merg mai eco,fara sa stric cutia de viteze sau alte rahaturi

  • @andreacolangelo7632
    @andreacolangelo7632 Před 3 lety +3

    Inquadri per un sacco di tempo il pezzo smontato, ma non fai vedere come lo smonti, non spieghi che prodotti usi o i procedimenti, ti pesa così tanto parlare? Video pessimi per questo motivo.

  • @Markooooni
    @Markooooni Před 4 lety +1

    Is there any diference in engine sound after the cleaning of the valve

  • @nathanthompson8866
    @nathanthompson8866 Před 3 lety

    What sealant was that you used? And did you clean with petrol?

    • @mbz4652
      @mbz4652 Před 2 lety

      Did you find an answer to your question?

    • @flowpahcortes
      @flowpahcortes Před rokem +1

      @@mbz4652 the owner said above Something like Gasket RTV Silicone Sealant

  • @7777777370
    @7777777370 Před 3 lety +1

    3.28 !!! il doit y avoir une vis foiré ça fait un bruit de poule en desserrant !! ok je sort .....................

  • @clintonfairs2751
    @clintonfairs2751 Před rokem +1

    Is using a sealant a must?

    • @ClaudeTube
      @ClaudeTube  Před rokem

      Yes. liquid gasket is needed.

    • @clintonfairs2751
      @clintonfairs2751 Před rokem

      @@ClaudeTube spoke to a local mechanic and he said it isn't exactly needed, as it has a metal gasket, I've cleaned and refitted the egr anyhow and fixed majority of my issues, also done the MAP sensor

  • @AkinBIRLIK
    @AkinBIRLIK Před 4 lety +2

    KM?

  • @garethminney1198
    @garethminney1198 Před 4 lety

    Hi, great video. I've got a vauxhall estate (astra j) 1.7 diesel 13 plate. Had an issue where i lost all power, car still drives but extrelemy slow, no high revs. The garage replaced fuel filter and done diagnostic check. Had the codes P0088 fuel rail high pressure and P0089 fuel pressure regulator performance. They are now suggesting to change the fuel pump but are insisting the timing belt will need changing. Do you think everything may just require a clean like you've done in this demonstration? Any advice would be appreciated.

    • @freelife8178
      @freelife8178 Před 4 lety +1

      I just bought a 2010 1.7cdti it losses power at times and the yellow spaner and car lights up. Turn engine off and on then power is back. Im going to clean my egr and boost sensor. If boost sensor clogged with hard carbon it will effect the power.

    • @RickvanWorkum
      @RickvanWorkum Před 3 lety

      @@freelife8178 did you find out what the issue was? I am having a similar issue when the engine is cold, after a couple of minutes driving it loses most of its power and has difficulties revving. Restarting the car resolves the issue and it never comes back. Greatly appreciated!

  • @simonbolivar8752
    @simonbolivar8752 Před rokem

    Ну и , через сотню км он опять такой же....

  • @lydvigbogar470
    @lydvigbogar470 Před rokem

    Бдпд

  • @aleksusnemo4284
    @aleksusnemo4284 Před 8 měsíci

    там не только клапан нужно чистить но все остальное

  • @mehmannecefov8657
    @mehmannecefov8657 Před rokem

    Opel.nasosudizel