Thanks for this video. Being new to Rifles I’ve used this video as a guide to setting up my new Daniel Defense. One expensive hobby. Best AR set up I’ve found on CZcams so far! Good stuff bro.
Love your setup. i have the ddm4v7lw upper on a bcm lower with a flat 3lb Velocity trigger. sweeeet gun. i have the vertical dd forgrip and that helps with he heat. It gets warm, but is still top of the line. I love my ddm4v7lw.
I love your setup based off the video you posted I went out and purchased the DDM4 V7 too along with the 3x magnifier and halo sight. I did make a few modifications to my build compared to yours. The first mod I did instead of spending $200 to upgrade the trigger on the DDM4 V7. I purchased the DDM4 V7 "Pro" which was only $200 more than the DDM4 V7 with the pro version you automatically get an upgraded trigger in addition to an upgraded heavier barrel, your barrel length increases from 16 to 18 inches. You also get an upgraded barrel compensator and a full gas system. My final mod was to add offset 45 degree hard sights instead of having the sights mounted on top of the gun. I used offset sights in case something happened to the glass of my halo sight and it would prevent me from using my rear sight
Just picked mine up 2 days ago. I put on the VG6 Epsilon break with the cage as I know it works. Have it on another gun. I went with the Sig Romeo5 and Juliet3 red dot and magnifier. Got a deal on the gun and red dot. Like $450.00 off if I bought it all together. Took it to the range yesterday and had to bring the red dot down 3 clicks and it’s spot on now. I heard the DD flash hider works good but I had an extra VG6 from another build that I sold before I put it on, so it had to go on this. Flat shooting with very accurate double taps. I had an extra Streamlight Strion and a mount that I stuck on it but I like your set up better. Might have to look into it. I kept the fore grip and the way I have my light set, I can reach the light button with my thumb so it works. Gonna have to see what Olight has going on with a wired on/off switch as those lights are fantastic. Thanks for posting. I might have some video footage by late this evening myself.
PNW Sportsman czcams.com/video/piPhIrYkHsQ/video.html. Here’s the link. I show the light near the end. It’s the PL Valkyrie Pro 1500 lumen with the pressure switch. I did some mods too. Added a PA 1-6x24 FFP scope and a Geissele SD-E 2 stage trigger. Shoots good out to 500 yards.
Just order my first FA ever and it happens to be a DDM4V7P. Your video is exactly what I needed to figure out what I will be doing. I appreciate the work you are showing here. I know this is an older video, but would you mind listing all the components in your description?
I'm not sure if you found a solution to the beard hair problem, but I recommend getting some specialised tape to wrap the rubberized part that is bothering you. Hockey stick tape is probably the best option.
Hello. Excellent an informative video. Where did you get your whole Surefire setup, if you don’t mind me asking?? Thank you an thank you for your timely response
Nice! I have a DDM4 SBR (300 BO), a DDM4V7p (5.56) and a DDM4V7s where I swapped out the barrel and BCG to 7.62x39. I also have a 16" build in 12.7x42 (Beowulf). I would like to change the trigger in the 12.7x42 to Velocity. Love them all.
Rifle is in the safe so going from memory here but here ya go: Arisaka offset flashlight mount Surefire M300C weapon light Velocity Triggers 3.5 lb flat faced trigger Magpul AFG foregrip Radian Raptor charging handle I replaced the optics setup since the video to Vortex Razor 1-6 with American Defense QD mount
I was looking to add the Velocity mpc trigger on my ddm4 v7but was concerned that the stock trigger guard couldnt be replaced because it is a one piece grip & trigger guard. Velocity seems to recommend a replacement trigger guard to add more clearance. Did you have any issues with clearance with the mpc - flat faced with the finger catch?
Gonna go buy me a goat now haha. Great video! Im considering a DDm4a1 with the old school quad rail after this Coronavirus shit is over. Gonna have to start saving!
I found a MK18 Law Folder never fired used in a pawn shop. Expect a lot more new-used guns to show up. Some new gun owners impulsive loss, because they realized if there’s no government to protect citizens you have to protect your own, can be your gain. I’m assuming the liberal wife found out and made them sell it. Start looking around.
Its almost the best rifle ever. You need to do the following: Geissele Trigger Super Dynamic Combat, Geissele H2 Buffer and Super 42 Spring, Geissele Ultra Duty aluminum trigger guard, Geissele takedown pins and mag release, remove the grip and replace with a grippy and better angled magpul one, radian talon 45 degree aluminum safeties, upgraded bolt catch/release, upgraded charging handle (Radian or Geissele), and the B5 sopmop stock. ...oh and before i forget, remove the flash hider and install the Surefire Warcomp (add rocksett). That should all come to around 1k. You already have awesome optics, i do prefer the Vortex Solar or Aimpoint MicroT2 along with a scalarworks mount. Also, the magpul iron sights are a bit lower profile and pretty awesome. Enjoy in good health!
I ordered everything online including the rifle. If you shop around that’s the best way to keep costs down! I had the rifle shipped to Brad’s Guns in Bonney Lake. Love supporting local and they’re awesome and very knowledgeable
I’ve ran 7000+ rounds threw my V7. Never had 1 malfunction. My go to rifle! I also have the V11 SLW and also love that one. But there is just something about the V7 that I love.
I love this rifle. Question is, do you have any issues with your trigger reset? I've seen two examples of trigger reset issues when aftermarket triggers where installed. How is yours doin? Thanks
@@pnwsportsman4036 excellent, I'm glad to hear that. Definitely helps me in my decision between this model DD and possibly similar model BCM. It's a shit load of money for me to spend so I appreciate it your response!
Very nice! However, I have a DDM4V7 as well, but the best rifle ever is my Radian Model 1 that I upgraded with a Proof Research carbon fiber barrel topped off with a Nightforce ATACR 1-8.
hey man, so what's the difference from the v7 and the v7 pro? I just ordered one from my local gun shop. I told the worker I wanted the Pro, but I noticed on the receipt he put the standard v7. Is this something worth mentioning? (just charged me for standard). I'd like the 18' barrel but other than than, is there much of a difference between the two?
@@pnwsportsman4036 thanks for the reply, maybe ill order it next time. 6 to 8 month wait for my v7 starting today. walked out of the gun shop unsure if I was excited for the purchase of my first firearm or sad that I have to wait so long for it haha. mixed emotions walking out of there .
I actually switched it out with a Vortex Razor HD 1-6. I wanted to love the Eotech but the fuzziness of the reticle kept nagging me. Could be just the green reticle as I’ve heard it’s worse than the red but who knows. I’m extremely happy with the Razor though she’s a heavy bitch
Damn nice rifle. Picked up the same one this morning. Went with the strike eagle 1x8 in an American defense cantilever mount but otherwise identical essentially. How’s the accuracy so far with what shooting you’ve done?
So, the rubber doesn’t pull my beard hair at all. I can rub it all day and it doesn’t bother me a bit. It’s where the stock meets the buffer tube that wiggles back and forth that grabs my beard hair. Just like the keltec sub 2000. I had to change the trigger cause it sucked. The dd magazine can get stuck in there if you smack the bottom of the mag . Dd calls it over insertion. I’ve talked with them about it. That can get you killed if you ever needed it. They said just run pmags. Also the buffer spring is very loud and annoying. Wish I knew what to change it out with. Over all it’s a great rifle though once you change everything about it lol. The dd mag does not stick in any other rifle no matter how hard I tap the bottom. Also the recoil for some reason is very tough for 556 I mean it’s not terrible. We are talking 556 but I don’t understand why it kinda beats my shoulder up. It’s a mid length gas system that is supposed to make it better.
Haha I have one on my MK18 build- it’s definitely a lot better. I may just do that!- The only thing that’s not stock on this rifle is the trigger (Geissele SD-C now)
I have both love them both they are not going anywhere I got the ddm4v7 custom not many videos on it , it comes with the same geissele trigger as the pro a radian raptor charging handle and muzzle brake and its cerakoted milspec brown for $1,799
Can you not change out the stock on a DDM4V7? I've watched tons of videos on this rifle and no one, NO ONE, has ever put a different stock on it. I'm new to ARs so forgive my ignorance, but are there just some things on the platform that you can't change?
DD owners leave it on so people know what we are shooting. It’s a subtle flex😅 A buddy of mine saw me at the range weeks ago and watching from the glass in the lobby. He said when you’d get that DD?, that’s money my man. People know that stock!
The rifle is about $1600 The optics are around a $1000 Troy battle sights $250 Front grip $50 Surefire light setup $350-500 Trigger is around $250 Radian charging is $120 Not including tax and shipping.
Started my business a couple years ago been really busy- I still shoot but not every weekend like I used to. I need to make some more. Still love the rifle
Thanks for this video. Being new to Rifles I’ve used this video as a guide to setting up my new Daniel Defense. One expensive hobby. Best AR set up I’ve found on CZcams so far! Good stuff bro.
rene valentin awesome man yes it is haha Thanks and enjoy your new rifle. Still loving mine but swapped the Eotech/magnifier for a Razor 4-27 gen II
I just put the same hhs on my milspec + Ddm4 v7. Can't wait to play with it. How do you like that sight and magnifier on the m4v7?
@@pnwsportsman4036 4-27x??
you had 1-3x, u sure difference is not too big?
Excellent choice. I have the same one in rattlecan finish. Like you said, it's probably one of the nicest ARs out of the box.
Most definitely. Thanks for the comment!
Nice gun! Love the up grades and add ons you did.
You really helped me out on deciding which trigger and iron sights to get. Greatly appreciated!
Glad to hear it!
I dig this setup. Awesome rifle!
Love your setup. i have the ddm4v7lw upper on a bcm lower with a flat 3lb Velocity trigger. sweeeet gun. i have the vertical dd forgrip and that helps with he heat. It gets warm, but is still top of the line. I love my ddm4v7lw.
Thanks! Yea I am loving the Velocity trigger so she’s gonna stay
Clean and simple. Love it. Nice gun bro. I love my v7.
Wow, I have the same optic, magnifier, and iron sights on my DDM4 V7.
Great video.
The best rifle I've ever used. Hands down. People need to quit bitching about the price. You get what you pay for.
Totally agree
Was my first rifle
@@belovedLion80 Mine too.
You have to say that to justify your price. I’ve shot them and I’ve shot much cheaper rifles. There is no difference 🤷🏼♂️
@@garyhochstetler7082 Poor must suck. 🤣
New sub thanks for taking your time to show a beautiful well made weapon 👌 👌 wow fantastic 👏.
Wonderful setup brother. 👍🏻
Picked one up in the Rattle Can finish, and absolutely love the damn thing. Haha.
That finish is sick
I love your setup based off the video you posted I went out and purchased the DDM4 V7 too along with the 3x magnifier and halo sight. I did make a few modifications to my build compared to yours. The first mod I did instead of spending $200 to upgrade the trigger on the DDM4 V7. I purchased the DDM4 V7 "Pro" which was only $200 more than the DDM4 V7 with the pro version you automatically get an upgraded trigger in addition to an upgraded heavier barrel, your barrel length increases from 16 to 18 inches. You also get an upgraded barrel compensator and a full gas system. My final mod was to add offset 45 degree hard sights instead of having the sights mounted on top of the gun. I used offset sights in case something happened to the glass of my halo sight and it would prevent me from using my rear sight
Very nice man. Enjoy the new rifle! I swapped out the Eotech/magnifier with a Razor 4-27 gen II
@@pnwsportsman4036I almost just fell over after seeing the price of that Razor geez
Sick setup man! Good video keep posting!
That lamb is awesome!! Great gun too lol
Love my DDM4V7👍🏻👍🏻👍🏻
Just picked mine up 2 days ago. I put on the VG6 Epsilon break with the cage as I know it works. Have it on another gun. I went with the Sig Romeo5 and Juliet3 red dot and magnifier. Got a deal on the gun and red dot. Like $450.00 off if I bought it all together. Took it to the range yesterday and had to bring the red dot down 3 clicks and it’s spot on now. I heard the DD flash hider works good but I had an extra VG6 from another build that I sold before I put it on, so it had to go on this. Flat shooting with very accurate double taps. I had an extra Streamlight Strion and a mount that I stuck on it but I like your set up better. Might have to look into it. I kept the fore grip and the way I have my light set, I can reach the light button with my thumb so it works. Gonna have to see what Olight has going on with a wired on/off switch as those lights are fantastic. Thanks for posting. I might have some video footage by late this evening myself.
Nice setup! Let me know when you post the vid. I’ve heard those Olights are pretty awesome
PNW Sportsman czcams.com/video/piPhIrYkHsQ/video.html. Here’s the link. I show the light near the end. It’s the PL Valkyrie Pro 1500 lumen with the pressure switch. I did some mods too. Added a PA 1-6x24 FFP scope and a Geissele SD-E 2 stage trigger. Shoots good out to 500 yards.
I too am a fan of the Romeo5 - have several of them.
Damn good looking m4 brother. Hoorah
Just order my first FA ever and it happens to be a DDM4V7P. Your video is exactly what I needed to figure out what I will be doing. I appreciate the work you are showing here. I know this is an older video, but would you mind listing all the components in your description?
Thanks I’m glad it helped ya! Yea, I know I posted in a few comments a while back. I’ll update the description when I find it or get time to list them
Just found your channel and subscribed. Just got my first DD MK18
Radian Weapons Talon for ambi safety selector. Smooth, positive click, 69/90 throw and just works.
Hi, can you list the accessories models that you install and prices?
Thanks
Thanks for the Vid , I just won a bid for a 300 AAC. I want the same setup.
I seen your pets and rifle and subbed 100 thumbs up great show.oley is Kool as they come.
Haha thanks man. My brother has the v11- both are awesome I just prefer MLok
That's what I have it's light as all hell that's for real.
I absolutely love mine stock I put a holoson green dot on it at 75 yards hit every time love it no heat trouble what so ever
Dope Video
I love my DDM4V7
GUNS. DOGS AND GOATS. CAN'T GET BETTER THAN THAT. NICE VIDEO.
Agreed haha
Just a tip might wanna oil the buffer spring so you get a nice smooth and sounding pull. Good vid hard to find videos on this specific rifle
Thanks man
I'm not sure if you found a solution to the beard hair problem, but I recommend getting some specialised tape to wrap the rubberized part that is bothering you. Hockey stick tape is probably the best option.
Hello. Excellent an informative video. Where did you get your whole Surefire setup, if you don’t mind me asking?? Thank you an thank you for your timely response
Oh an apologies where did you get your Velocity trigger please?? Thank you an thank you for your timely response
That’s a damn good lookin’ sweetie! Nice AR too.
Curious about your Troy BUIS with your QD EXPS EOTECH... With the sights and the optic do you have a 1/3 co-witness?
What pressure pad are you using?
What trigger is that? 3.5 pound pressure ? Thanks
i really like mine and i got the 10.5 barrel, will worth the money
Nice rifle! really enjoyed Ollie as well
Thanks Gabe, he’s a good little guy
Loved the video man! I’m definitely looking to get one of their rifles as soon as possible.
Can’t go wrong and thanks!
Nice! I have a DDM4 SBR (300 BO), a DDM4V7p (5.56) and a DDM4V7s where I swapped out the barrel and BCG to 7.62x39. I also have a 16" build in 12.7x42 (Beowulf). I would like to change the trigger in the 12.7x42 to Velocity. Love them all.
Very awesome ! Can you please have the list for the stuff you added to the rifle with the details.
Thank you .
Rifle is in the safe so going from memory here but here ya go:
Arisaka offset flashlight mount
Surefire M300C weapon light
Velocity Triggers 3.5 lb flat faced trigger
Magpul AFG foregrip
Radian Raptor charging handle
I replaced the optics setup since the video to Vortex Razor 1-6 with American Defense QD mount
@@pnwsportsman4036 was the setup with the magnifier and optics a problem, or why the change?
Loves your setup, brother. Mine is coming in 2 to 3 weeks. Sub 👌
Radian Talon 45• safety. It’s the bees knees.
Hey man!! Awesome rifle!! i was wondering if I could get a list of the upgrades, so I can set mine like yours!
I posted in a comment a long time ago. I’ll see if I can find it, I’ll update the description as well. Thanks man!
Love the setup have the same gun. I might have missed it what trigger are you running?
I was looking to add the Velocity mpc trigger on my ddm4 v7but was concerned that the stock trigger guard couldnt be replaced because it is a one piece grip & trigger guard. Velocity seems to recommend a replacement trigger guard to add more clearance. Did you have any issues with clearance with the mpc - flat faced with the finger catch?
No issues at all. Thanks for watching!
You can always order a pistol grip from DD without the attached trigger guard as well if you want to
Gonna go buy me a goat now haha. Great video! Im considering a DDm4a1 with the old school quad rail after this Coronavirus shit is over. Gonna have to start saving!
I found a MK18 Law Folder never fired used in a pawn shop. Expect a lot more new-used guns to show up. Some new gun owners impulsive loss, because they realized if there’s no government to protect citizens you have to protect your own, can be your gain. I’m assuming the liberal wife found out and made them sell it. Start looking around.
Noah Lefferdink haha I did a build with the MK18 upper I love the quad rail too!
The Troy battle sites, are they the micro?
Its almost the best rifle ever. You need to do the following: Geissele Trigger Super Dynamic Combat, Geissele H2 Buffer and Super 42 Spring, Geissele Ultra Duty aluminum trigger guard, Geissele takedown pins and mag release, remove the grip and replace with a grippy and better angled magpul one, radian talon 45 degree aluminum safeties, upgraded bolt catch/release, upgraded charging handle (Radian or Geissele), and the B5 sopmop stock. ...oh and before i forget, remove the flash hider and install the Surefire Warcomp (add rocksett). That should all come to around 1k. You already have awesome optics, i do prefer the Vortex Solar or Aimpoint MicroT2 along with a scalarworks mount. Also, the magpul iron sights are a bit lower profile and pretty awesome. Enjoy in good health!
Just buy a Geissele rifle 🤣 then lol
Nice set up bro 👍
Thanks man
Nice rig.
Can you possibly list all of your upgrades and add a link???
Bad asssss👍!
Where did you buy it? Did you get the accessories at the same place? I live in puyallup, wa
I ordered everything online including the rifle. If you shop around that’s the best way to keep costs down! I had the rifle shipped to Brad’s Guns in Bonney Lake. Love supporting local and they’re awesome and very knowledgeable
I just picked up the lw, I hope it doesnt suck too bad lol
The government profile heats up just as quick as the lightweight correct?
OOOOLLLLLIIIIIEEEEEEEE
Nice setup. Does your front Troy flip up lie flat? Looks like it stops short of flat against the pic.
Not all the way flat- it’s actually been irritating me I am going to call them
Links to those sight and scope please
You have the 2 dot reticle ?
would you recommend this version with the government barrel versus the lightweight version?
I prefer the gov profile- Lw heats up too fast for my liking.
Isnt the rear irons on backwards?
I would check those sights on that rooster in the background!!!
can you link your parts in the description please?
I’ve ran 7000+ rounds threw my V7.
Never had 1 malfunction.
My go to rifle!
I also have the V11 SLW and also love that one.
But there is just something about the V7 that I love.
That’s nice.
Thanks man
where did you get your handguard from, and what Is the name of It ?
Handguard is the 15 inch M lok Daniel Defense- Came with the rifle M4V7
I don't know if it's both because we're from the northwest but it's odd when this came up in my recommended because it's exactly what I just built🤔
Gucci setup, very nice
Thanks for watching!
I love this rifle. Question is, do you have any issues with your trigger reset? I've seen two examples of trigger reset issues when aftermarket triggers where installed. How is yours doin? Thanks
I haven’t had any issues- Maybe 500 rounds through with the Velocity Trigger. Hope this helps!
@@pnwsportsman4036 excellent, I'm glad to hear that. Definitely helps me in my decision between this model DD and possibly similar model BCM. It's a shit load of money for me to spend so I appreciate it your response!
Can’t go wrong with DD or BCM! The good ones aren’t cheap. But once cry once. I was in the same boat. Totally worth it
@@pnwsportsman4036 I agree brotha 👍
Do you have a play between upper and lower receiver? That’s been the issue with one of the you tuber.
No play at all on mine
Sweet goat bro. 🤣 ❤
2:52 dude your dog looks funny
He stinks too
Does he amuse you?
His dog is the Greatest Of All Time
Very nice! However, I have a DDM4V7 as well, but the best rifle ever is my Radian Model 1 that I upgraded with a Proof Research carbon fiber barrel topped off with a Nightforce ATACR 1-8.
Should have bought a new truck instead lol
hey man, so what's the difference from the v7 and the v7 pro? I just ordered one from my local gun shop. I told the worker I wanted the Pro, but I noticed on the receipt he put the standard v7. Is this something worth mentioning? (just charged me for standard). I'd like the 18' barrel but other than than, is there much of a difference between the two?
Yea difference in the Pro 18” barrel, Geissele S3G trigger, radian charging handle and safety selector, and rifle length gas system.
@@pnwsportsman4036 thanks for the reply, maybe ill order it next time. 6 to 8 month wait for my v7 starting today. walked out of the gun shop unsure if I was excited for the purchase of my first firearm or sad that I have to wait so long for it haha. mixed emotions walking out of there .
No prob- Hell of a first! Congrats- I prefer the 16” barrel and you can always swap out the other parts if you want but you definitely don’t need to.
Cool
good rifle but very expensive
Noiiiice!
So how do u like the Eotech set up I have a ddm4v5 I’m trying to de side if I want to go with that same set up or go with a 1x8
I actually switched it out with a Vortex Razor HD 1-6. I wanted to love the Eotech but the fuzziness of the reticle kept nagging me. Could be just the green reticle as I’ve heard it’s worse than the red but who knows. I’m extremely happy with the Razor though she’s a heavy bitch
PNW Sportsman that’s where I’m at the razor or the EOTech I have been told to go with the red and not the green for that reason
Nice, yes the magnifier setup is badass. I’d look at one up close (I didn’t) before you decide. I’ll do another vid with the Razor here soon.
Brent, focus on your target, not the retical
What do you think about the DDM4 V7S?
Damon Friedburg simple makes its sick! Same rifle just short barrel
🙏🏻 wish I could afford one
Where do you go shooting around here?
I go in the woods a lot and also Tacoma Sportsman’s in Puyallup
Nice! I’m debating if I should buy this rifle or not...
Ryan Rigsby I’ll answer for you....YES!
Buy one. I bought one several months ago. The rattlecan finish is so cool looking.
Damn nice rifle. Picked up the same one this morning. Went with the strike eagle 1x8 in an American defense cantilever mount but otherwise identical essentially.
How’s the accuracy so far with what shooting you’ve done?
I wasn’t able to get her out last weekend but will be able to this one or next and post an update!
PNW Sportsman 50yd zero on mine. Went back to 200 to confirm and put 5 rounds well within the diameter of a Coke can. Way more the rifle than me.
Definitely can’t complain about that! I’m taking mine out tomorrow and will hopefully get the same results!
So, the rubber doesn’t pull my beard hair at all. I can rub it all day and it doesn’t bother me a bit. It’s where the stock meets the buffer tube that wiggles back and forth that grabs my beard hair. Just like the keltec sub 2000. I had to change the trigger cause it sucked. The dd magazine can get stuck in there if you smack the bottom of the mag . Dd calls it over insertion. I’ve talked with them about it. That can get you killed if you ever needed it. They said just run pmags. Also the buffer spring is very loud and annoying. Wish I knew what to change it out with. Over all it’s a great rifle though once you change everything about it lol. The dd mag does not stick in any other rifle no matter how hard I tap the bottom. Also the recoil for some reason is very tough for 556 I mean it’s not terrible. We are talking 556 but I don’t understand why it kinda beats my shoulder up. It’s a mid length gas system that is supposed to make it better.
Radian safety just saying!🤯🔫🤯
Haha I have one on my MK18 build- it’s definitely a lot better. I may just do that!- The only thing that’s not stock on this rifle is the trigger (Geissele SD-C now)
Anyone know what happened to this guy. He got a nice rifle and just disappeared?
I was looking into the bcm is this better?
BCM are excellent rifles as well. Both are in the same realm of quality.
I have both love them both they are not going anywhere I got the ddm4v7 custom not many videos on it , it comes with the same geissele trigger as the pro a radian raptor charging handle and muzzle brake and its cerakoted milspec brown for $1,799
Wheres the update video
what iron sights are those
They’re Troy Industries Battle Sights
Can you not change out the stock on a DDM4V7? I've watched tons of videos on this rifle and no one, NO ONE, has ever put a different stock on it. I'm new to ARs so forgive my ignorance, but are there just some things on the platform that you can't change?
Yes it comes on a mil spec buffer tube so can be easily swapped if you need. I think a lot tend to leave it on just so you know it’s a DD haha
DD owners leave it on so people know what we are shooting. It’s a subtle flex😅
A buddy of mine saw me at the range weeks ago and watching from the glass in the lobby. He said when you’d get that DD?, that’s money my man. People know that stock!
I changed mine to bcm just like the rest of them and a lot of people change them out .
Great looking rifle man super clean no nonsense setup what would you say was the total cost of the build?
Thanks man. I’m not sure what I spent but the accessories damn sure add up!
It is a beautiful weapon... How much did the entire setup cost?
Alan J.M.G probably around 2500-3000$ if you still care. Worth every penny
The rifle is about $1600
The optics are around a $1000
Troy battle sights $250
Front grip $50
Surefire light setup $350-500
Trigger is around $250
Radian charging is $120
Not including tax and shipping.
These are the best AR s. End of story
Is that the 16 inch v7?
Yessir
Damn you were doing the safety checks before Safety checks on CZcams was a thing
It's been 9 months and you haven't post a video of you shooting
Started my business a couple years ago been really busy- I still shoot but not every weekend like I used to. I need to make some more. Still love the rifle
🤟🤟🤟
Big
oregon? Nice rifle.
Now I miss my V7
Better get another 😁