I got 2 dtf printers. Once tech support remotely accessed my computer, installed the software and check a few settings I was printing in less than an hr. No issues 🙌🏽
Thanks for the honesty. I've had the A3+R since end of February and found that you have to be committed. These machines need daily attention if you don't want major issues later on. I do capping station cleaning daily and wet capping at night after use everyday. Yes it does take time learning to use the printer, shaker oven and the software but the software is very powerful once you learn it.
You are amazing to tell us the real REAL. We know there is a song and dance and those concerns you brought up have been on my mind. Definitely something to consider. Be safe.
Nothing in life is ever simple. You might have to sing or dance to success. We want everything to be simple but sometimes it takes a little bit more than simple. Some people are not willing to jump over the initial hurdles to get to the smooth side. You just gotta figure out if you are.
Y'all must love headaches. Buy your prints and press and sell. What could be easier?? No maintenance no frustration no fumes no worries. I'd love to have the gear but only from a crafter's perspective. A Dubb you're a giant in this game. Respect!
We don’t get any headaches because we take the correct precautions but the reason why I do it is to provide a service for people. I could just buy my transfers to make shirts but i want to run a business to create opportunities for people and provide people with jobs. Just pressing shirts would be one job but making transfers once I get the orders consistently enough and can justify hiring someone it will become another hob for another individual. It’s no longer just about me growing. I wanna help people not only on CZcams but also in my community. Thank you for your comment I appreciate it.
@@adubbproductions This is why I say you are a giant in the business, you seek to benefit others. I can't help but appreciate your outlook on the community. God bless you man!
@@adubbproductionsman that’s real and my aim with my printing service. I need videos like this to give me the real so I know how to prepare my space and what to look out for
You explain it well. I normally describe that as "not ready for general public end-users" First 3D Printers, early 90s computers when you opened to nothing but a command prompt (before the mouse), first drones etc. If you have been an early adopter of any new technology it is always "tinker and try", not "plug and play". You gotta be the kind of person who works on their own stuff without being intimidated or frustrated unless you want to wait a years for everything to be refined down to push button for simplicity
For the printers, the issues arise with the modified printers like the one in this video. For the commercial machines, If you don't know what you're doing with them and how to calibrate them, save your money. The substance is called oil... for the fumes, you need to get a 375CFM exhaust fan and that should take care of the fumes. If you are using the air purifier they provided, remove it and get a real 6 inch exhaust fan. You should see the oven working to keep the temperature when the exhaust fan is on.
I've had the Prestige A3+R for a couple of weeks now. I am loving it so far, but I had a couple of hours of panick attacks the first day because it was displaying "critical error" lights when trying to start it up. Turns out there was a clamp holding the printhead carriage in place. I havent seen a single unboxing where someone had to remove this clamp, nor did the tutorials say anything about it. I was lucky enough to notice it and remove it before sending it back and had the printer running and printing within the first 24hrs.
You are absolutely right. I bought a Roland BN-20D. It arrived in March and hasn’t worked yet and that’s after 4 technician visits to my home. They have replaced it and the new one arrived today. Fingers crossed. I also who have the BN-20.
Wow. They have issues too huh. Interesting. All these machines are worth working threw the issues though. When you get to the other side they run great.
It’s true I have spoke with so many people and they said the same thing till one day I ran into cobra DTF machine they are hands down the best … they actually send you a technician to your home or warehouse where ever it is and hands down they calibrate and sit there till your machine is ready to go with you and your are happy. But they are in a little more expensive side but they are a nice machine and their customer. service side is good.
I got a pristige A3+R and i got some issues with it as well. OMG!!! i think I'm finding the right formula but I want to stay tune to your videos and share mines too Team work !!! 💪
My printer is just not working the we should be, and it's becoming a pain in the rear I can't print multiple transfers and able to use the whole system ( printer and sismo ) My printer stops in the middle of the job I'm so frustrated !!! Any advice??? Thank you, man
The only way my printer stops in the middle of a job is if the computer is disconnected or the computer falls asleep. Put your computer setting so your computer never falls asleep. That could be the issue. If not contact Aa print supply co if that’s where you got it from. They are super helpful.
Yes you are right. Purchased the Prestige A3+ last July. Got it end of August. Had problems after problems. I am getting the hang of it but still having problems getting vibrant colors. Love the machine and what it can do. Some day I hope my colors will look as good as yours.
Hi Allan, Can I get some advice or setting options on the Prestige A3+. I have some orders that will be printed on black shirts. The print design color will be white. The white looks like a grayish white.
@@adubbproductions That would be awsome if you could make a video showing how you got your colors to pop. Ive have my machine for months with no luck at all. I appreciate you sharing your valuable information.
I have a weekly zoom call you can get in and talk. It’s available for members of my channel. We are getting on a call today at 7pm on a few minutes actually. We normally get on zoom calls on Fridays at 7pm. You have to be a top tier member of the channel to access the zoom calls.
@adubbproductions It is true, specially if you rush to use it without study the printer and its functionality first. I bought a Procolored L800 almost a year ago, is an entry level printer, but it worked perfect from the start, maybe I was lucky, but I watched a lot of CZcams videos before even unboxing it, lol. I was really nervous at the beginning, but your videos encouraged me to enter the DTF world, precisely because you say it like it is. Thank you for that.
Great advice. You helped me with my dtg and drying time. This was very helpful, I have the Ricoma Vision dtg and have issues with getting a print to act right. So I know that this machine will also do dtf and I watched you as I usually do to learn. This eye opening as I haven’t had a lotta success yet and thought I should try dtf. Please make a video on the Ricoma dtg and its issues, the people should know.
I have the prestige a3+r. I was lucky in that mine worked pretty good out of the gate. It did have some white ink issues later on though. Black ink seeped in to the white ink dampers somehow.
We appreciate you I've been watching your videos from time to time just because,your videos are interesting and also you touch bases on the important things like that powdery substance definitely specialist I will highly recommend wearing that mask keep up the great work Buddy.❤ Coming from the oil kids
110% AGREE!!! I bought mine from Swing Design and they would NOT help me set up until i reached out to AA Print supply, they helped me installed Cad link software and helped me how to run the Epson F570. i spent 7700.00 with them but NOOOOO help to get me started when i got them. But im happy with it now all thanks to AA Print supply crew!
Exactly. The company you choose to purchase from matters. AAPrint supply my got it done for me and communicated with me the entire time. I had to be patient but they let me know when e could talk and do a remote call.
@Allan Wade - That oily substance is glycerine that is indeed a byproduct of the adhesive melting. You may even notice it on the transfers after they have sat for a while. I have yet to research the side effects of exposure to it. I am using an Epson F2100 for DTF, which means one sheet at a time and manual powdering and curing. No roll to roll. I should probably be using a respirator.
Dear friend, perhaps you need to learn about a fully automatic powder feeding, drying, and printing integrated DTF printer. I am the manufacturer of the machine. If you need to replace the machine, please give me an opportunity to communicate and cooperate with you! Thank you.
When it comes to d t f printers, the problem is just the white ink. All the colors will work without issues. All the DTF companies have to do is give a WINDEX cartridge or just employment a cleaning system🤔 Otherwise great 👍🏿 technology love it.
I was in the same boat, took about 3 weeks to work out the bugs. With that being said the other issue is sales! Everyone is doing DTF and selling printed sheets for $2!!! I have some of mine in Etsy, fb, letgo, all with shipping available and I think I’ve sold maybe $40 worth in about month! I have monthly payments on my printer of $278 a month my monthly sale of $40 doesn’t even cover the cost of supplies I’ve used lol😂, hope everyone else is doing better then me, good luck people. Stay positive!
@@TamiT3 lol 99% are crafters most professionals dont invest in new technology. these company's saw crafters as Fresh meat and they all focused on them.dtf will end up like plastisol transfer (Now called screen print transfer) they will fade out. plastisol use to be $3.00 now their $.15 at the lowest. crafters going crazy over puff,metallic,etc thats been around for 10yrs. even sublimation transfer went down when they started making ciss tanks and selling 100m and higher inks.
Mine had a rare defect. They offered to replace it but couldn’t tell me when I could get a new printer. So I’m in the process of doing a return this week.
I got the A3+ broooooo you ain’t lying you gotta figure it out by yourself , had it about three weeks and now I’m flowing and making money . Cadlink is a crazy learn aswell
Thanks for all the good info, after making my decision , all stores are out of the 3A R plus. 😐 looks like they trying to push the sell on the 4A , now to wait until they get it back on stock
I will be purchasing the same set up as you at the end of the month. I also have several embroidery machines and both the DFT printer/oven will be in the same room as the embroidery machines. Have you noticed if the DTF fumes are in the shirts that you embroider?
Hello friend, I am a manufacturer of DRT printers. Our machines use i3200 nozzles, and the printing quality and machine quality are very good! Can you give me an opportunity to collaborate with you?
You are totally right! Sad to say that I spend so much money for mine and still haven’t been able to make one single good print! It’s been sitting down for months cus I was so discouraged and disappointed! But this video brings me hope to keep trying. Any advice on cleaning a epson L1800 ? Thanks!
Bro I've looking into doing DTF currently sublimating. But as far as DTF printer have in dis video do have a video about maintenance or could u tell me bout it plz
Ok, I agree & some I disagree. I have the exact same one you have. 1. My first one had a broken piece in the machine. You, being an influencer, will have better customer service available than a small business like mine. After 6 weeks of trying to get calls back and the issue resolved. I did a youtube video discussing the issues I was having, so be careful who you buy from. The next day, I received an email that my replacement printer was on the way. 2. I bought a large dehumidifier that helped the machine not have as many problems. 3. Every day, I shake the inks. If I do not, & miss 1 day of printing it takes forever to get it up and running. 4. If you do not print everyday, detailed graphic images I wouldn't spend the money. I love designing start to finish so i don't mind the extra work. Every issue is another 30 to 45 minutes of researching how to fix it. Today it was how to reset the waste tank setting. I print roughly 15 to 25 prints a day. Personally I love the printer. Just know it will take patience. The company is not as responsive to a small business's like myself. Once again a awesome and truthful video from A Dubb!
I don’t think me being an influencer made a difference. If that was the case why would I have had the experience I had? Check the date of my unboxing video till the next time I made a video actually printing. At least a month. You think that’s preferential treatment? After they fixed mine I’ve never had any issues. Never had to shake my ink. The A3+R actually has a self agitation system. Mine sits sometimes and i just do a print head cleaning before i print the next time and I have no issues. Had to draw white ink with the syringe shine once but that’s about it. Been working fine. The company you decide to purchase from definitely makes a difference. Aa print supply was ok. Could have been better but they got it resolved. Not was fast as i would have liked but they got it done. Just trying to let people know what they are in for based off of my experience. This was not preferential treatment.
@adubbproductions sorry I offended you. You took that personal. In no way did I mean it that way. Simply said, you have a following, you inspire others to buy products the companies sell, if not directly, then indirectly. People see these machines via your channel, the company benefits from your videos. They make sales from your demonstrations of their product. Sometimes even giving you equipment for you to show others. There is nothing wrong with that. That is simply the way business works. I'm happy for all the influencers on here and have made great friends. I am not an influencer, just something i didn't want to try, I'm not good at that. I watch to learn, encourage others, and I thought to be encouraged, to watch the equipment you and others use to see if it fits right for my business. I have learned many things from you. The main point was missed of MY OPINION, to others if they are looking at dtf. That took a whole other meaning than what I was commented.
@@TamiT3 you don’t offend me at all. Don’t take it that way. I’m just t try but to reason. I made a video about the experience i had. It wasn’t a pleasant one. Lol. So i just think it didn’t make sense to me that you thought i might have gotten that treatment when i just made this video about what to expect. I wasn’t offended just trying to reason with you. Sorry if you took it that way.
Me and a local screen printer were having words about maintenance. He kept telling me 30-40 minutes of cleaning ain’t worth the time or clearing clogs. I said labor of love. I wear a mask all the time and vented fumes outside the building with an inline booster. I always wear gloves and a garment.
That sounds like my dtg. I’ve cleaned this thing once and that’s it. Printed well over 500 transfers already. Idk. Everyone seems to be having different experiences.
I remember watching a Martha Stewart segment in which she recommended to everyone that they buy a wheel of cheese, for $4000. "If you budget permits..." sounded just like that Martha Stewart segment.
i have a procolored machine. the first couple weeks i needed to buy a new print head now the only problem im having is the white doesn’t align with the color
Are you talking about 2 to 3 weeks when starting up or this is a time issue to hsve to deal with after you've set up the printer? Im think when i get order's if they are having to wait 2 to 3 weeks just for me to make the order thats not good time to send out. I am just looking online to purchase everything i need to make my apparel designs. I guess what im wondering is, what printer is worth the price but not so complicated?
All dtf printers are going to be complicated to a person just starting off. The one I found easiest to use was my Ricoma Revel 2402-T you must know that by the time I got that machine I had already previously owned two other dtf machines so I was experienced in the technology. You can’t compare that to someone that hasn’t owned and operated anything. It is not realistic for you to expect to get any machine dtf, dtg. Sublimation, embroidery and be filling orders right away. No matter what you divide you are going to have to spend time and learn how to to use whatever you get before you fill your first order. In the meantime just use people like me to fill your transfer orders. www.allanawade.com
We are ordering DTF's because we don't have a printer yet. I do have a sublimation printer and a good embroidery machine. Could you comment on the white toner DTF machines? I just saw a video from HPN on them. No oven, no powder sounds great; but is it really good enough? I know you will be honest. Thanks.
No. Dtf is better. Better feel better colors at a lower price. Plus you don’t have to marry the sheets which is super time consuming and difficult to get perfect every single time. White toner has its advantages such as applying to hard surfaces but it’s not touching dtf as far as garment decorating quality of feel and look.
Hey just wanted to say, I just got some screen printing equipment....free! Looks like i have everything here! Someone dumped it last night and I picked it up this morning 😅
Mine has worked with no issues only problem I really see with DTF is that it cracks with the first wash any tips what I can do differently to make sure they don't crack anymore???
I seen something called protective coating but I don't really see anybody explaining it in a video and I don't want to buy something that I don't know how it works
Definitely the Prestige R2 out of those two options. Even though I’ve never used the pro colored dtf system i am familiar enough with the L1800 model and i would say definitely not for that one. The R2 hands down. Now even though I don’t have and have never used the R2 i know for sure it is significantly faster than the L1800 and I am close to people that have it. It’s a good system as long as you take care of it properly.
I'm starting a clothing brand and don't want to use third party at all. What printer would you recommend for me to buy with everything you have tried. I have a whole room to dedicate to this and have some customers requesting customs on a regular basis.
Damn bro, you saying these things don't work right the box the same issues I been having with engraving lasers too. Seems all these things have same issues across the board. Wild.
@AaronLeuppeth I haven't had any issues with my laser cutter at all and my new dtf printer works flawlessly. I've had it for idk maybe 6-7 months now. It's amazing.
Once it is up and running it is user friendly it’s just the initial set up. Some people are saying that they had no issues. Now I print with it all the time and it is very easy to use.
Do you feel the DTF is as vibrant as DTG? I've experienced a muted look,. but this is from a DTG printing on to DTF slides. Like you said its trial and error; I"m considering buying a DTF and would really like to get a high production unit, problem I've found for production is they're in the 26k range :(
Yes. once you get your dtf setting dialed in you can get extremely vibrant prints. I’m loving it more and more all the time. You can print almost as vibrant but it’s not quite dtg. It’s a good alternative but it’s not it. Dtg is better in my opinion but not having to pretreat and your images look great on a shirt and being able to sell transfers is amazing. 26k is a small price to pay if you consider what you are getting and what you can do with it.
My DTF printer worked out of the box no issues to begin with. The only issue i have is that the white gets clogged right away. Anyone have any pointers to fix that
I’m not having white clogging issues. I suggest doing a head cleaning and nozzle check everytime you are about to print. That’s what I do. Never have any issues.
Well, I already have 2 Ri1000 dtg printers. So dtg is covered. But when making DTF prints it’s very difficult if you are printing out large quantities on a dtg printer. With the dtf printer you have the roller system and you can press print and walk away nd come back to 20 or so DTFs. With the dtg you gotta powered each one individually and put it in an oven then take it out and repeat for each print. What if someone orders 50 or 100. That’s a lot of labor. I’d rather set up my dtf connect it to the shaker oven press print and walk away.
What i did was contact Aa print supply and let them access my computer and they did a bunch of things that I know nothing about and it still didn’t work so they sent me a different printer. I can’t show you what I don’t know. I can only tell you what i do know. It didn’t work.
I got 2 dtf printers. Once tech support remotely accessed my computer, installed the software and check a few settings I was printing in less than an hr. No issues 🙌🏽
That is a good experience. Glad to hear some good stories like yours.
What printers do you have?
What printers?!
Where are you located at?
Which printer did you get??
Thanks for the honesty. I've had the A3+R since end of February and found that you have to be committed. These machines need daily attention if you don't want major issues later on. I do capping station cleaning daily and wet capping at night after use everyday. Yes it does take time learning to use the printer, shaker oven and the software but the software is very powerful once you learn it.
Thanks for your honesty. ❤I’m considering purchasing one and your video is a great help.👏🏽
Totally agree! Thanks for your video! Dtf is a head ache but as you said is worth it!
You are amazing to tell us the real REAL. We know there is a song and dance and those concerns you brought up have been on my mind. Definitely something to consider. Be safe.
Nothing in life is ever simple. You might have to sing or dance to success. We want everything to be simple but sometimes it takes a little bit more than simple. Some people are not willing to jump over the initial hurdles to get to the smooth side. You just gotta figure out if you are.
Y'all must love headaches. Buy your prints and press and sell.
What could be easier??
No maintenance no frustration no fumes no worries.
I'd love to have the gear but only from a crafter's perspective.
A Dubb you're a giant in this game. Respect!
We don’t get any headaches because we take the correct precautions but the reason why I do it is to provide a service for people. I could just buy my transfers to make shirts but i want to run a business to create opportunities for people and provide people with jobs. Just pressing shirts would be one job but making transfers once I get the orders consistently enough and can justify hiring someone it will become another hob for another individual. It’s no longer just about me growing. I wanna help people not only on CZcams but also in my community. Thank you for your comment I appreciate it.
@@adubbproductions This is why I say you are a giant in the business, you seek to benefit others. I can't help but appreciate your outlook on the community. God bless you man!
@REALCHOCOLATE44 Thanks I appreciate it.
@@adubbproductionsman that’s real and my aim with my printing service. I need videos like this to give me the real so I know how to prepare my space and what to look out for
I love your realness! That’s how I was for DTG so I’m glad you keeping it real
Those transfers look AMAZING!!!! I cannot wait to get a DTF machine!!!
You are gonna love it.
@@adubbproductions 🙌🏾🙌🏾🙌🏾
I really love your honesty about the subject.
Thanks for the transparent info. Good to know this in advance.
Thank you for your honesty and support. This video has really helped me out a lot. God Bless you!!!
Thanks for the honesty, A Dubb!
You explain it well. I normally describe that as "not ready for general public end-users" First 3D Printers, early 90s computers when you opened to nothing but a command prompt (before the mouse), first drones etc. If you have been an early adopter of any new technology it is always "tinker and try", not "plug and play". You gotta be the kind of person who works on their own stuff without being intimidated or frustrated unless you want to wait a years for everything to be refined down to push button for simplicity
Got it, thank you so much for you honesty
Thank you for sharing your experience .....learned a lot!
D I did have any problems getting started. I'm so glad!
For the printers, the issues arise with the modified printers like the one in this video. For the commercial machines, If you don't know what you're doing with them and how to calibrate them, save your money.
The substance is called oil... for the fumes, you need to get a 375CFM exhaust fan and that should take care of the fumes. If you are using the air purifier they provided, remove it and get a real 6 inch exhaust fan. You should see the oven working to keep the temperature when the exhaust fan is on.
Fantastic safety advice on the fumes. I really appreciate that. This messages needs to be widely spread for safety. Thank you.
Thank you for being honest. There should be more like you!!
No problem. Thanks for watching.
I've had the Prestige A3+R for a couple of weeks now. I am loving it so far, but I had a couple of hours of panick attacks the first day because it was displaying "critical error" lights when trying to start it up. Turns out there was a clamp holding the printhead carriage in place. I havent seen a single unboxing where someone had to remove this clamp, nor did the tutorials say anything about it. I was lucky enough to notice it and remove it before sending it back and had the printer running and printing within the first 24hrs.
I just received mine and the video does show it needs to be remove. I’m having issues installing the software.
I went through months of learning curves and we have had it 6 months still always learning
Respirator to make T-shirt im good with my weeding and my toner transfer but thank you for telling the true finally someone did
You are absolutely right. I bought a Roland BN-20D. It arrived in March and hasn’t worked yet and that’s after 4 technician visits to my home. They have replaced it and the new one arrived today. Fingers crossed. I also who have the BN-20.
Wow. They have issues too huh. Interesting. All these machines are worth working threw the issues though. When you get to the other side they run great.
It’s true I have spoke with so many people and they said the same thing till one day I ran into cobra DTF machine they are hands down the best … they actually send you a technician to your home or warehouse where ever it is and hands down they calibrate and sit there till your machine is ready to go with you and your are happy. But they are in a little more expensive side but they are a nice machine and their customer. service side is good.
Do they charge extra to have customer service tech come to you're home to fix the printer?
I got a pristige A3+R and i got some issues with it as well. OMG!!!
i think I'm finding the right formula but I want to stay tune to your videos and share mines too
Team work !!! 💪
My printer is just not working the we should be, and it's becoming a pain in the rear
I can't print multiple transfers and able to use the whole system ( printer and sismo )
My printer stops in the middle of the job
I'm so frustrated !!!
Any advice???
Thank you, man
The only way my printer stops in the middle of a job is if the computer is disconnected or the computer falls asleep. Put your computer setting so your computer never falls asleep. That could be the issue. If not contact Aa print supply co if that’s where you got it from. They are super helpful.
ABSOLUTELY SPOT ON BROTHER
Huge fan of you work bro. Appreciate you.
Thank you. 🙏🏾
Great info about DTF and health info.
Yes It is definitely a learning curve and i have two converted Epson 7980 once i got them converted and fine tuned its been smooth ride.
I feel the same way. Once you are up and running these things are money printers.
Converted?....please inform
@@taquiviajulisajoiner8354 Hi what did you need to know?
I am currently waiting for our DTF Printing System to come in!
Yes you are right. Purchased the Prestige A3+ last July. Got it end of August. Had problems after problems. I am getting the hang of it but still having problems getting vibrant colors. Love the machine and what it can do. Some day I hope my colors will look as good as yours.
Ok. Well i need to make a video showing you how I get the colors I do. Stay tuned. Coming soon.
@@adubbproductions Oh Yes!!! that would be GREAT!!!!!!!
@@adubbproductionsplease do! I would like to learn how to use rasterization if you could do one on that as well.
Hi Allan, Can I get some advice or setting options on the Prestige A3+. I have some orders that will be printed on black shirts. The print design color will be white. The white looks like a grayish white.
@@adubbproductions That would be awsome if you could make a video showing how you got your colors to pop. Ive have my machine for months with no luck at all. I appreciate you sharing your valuable information.
I appreciate your honesty. I want to start a business. So glad I found your video.
I would love to know more about starting up a business. Anymore information you can share I would appreciate it
I have a weekly zoom call you can get in and talk. It’s available for members of my channel. We are getting on a call today at 7pm on a few minutes actually. We normally get on zoom calls on Fridays at 7pm. You have to be a top tier member of the channel to access the zoom calls.
@adubbproductions It is true, specially if you rush to use it without study the printer and its functionality first. I bought a Procolored L800 almost a year ago, is an entry level printer, but it worked perfect from the start, maybe I was lucky, but I watched a lot of CZcams videos before even unboxing it, lol. I was really nervous at the beginning, but your videos encouraged me to enter the DTF world, precisely because you say it like it is. Thank you for that.
Great advice. You helped me with my dtg and drying time. This was very helpful, I have the Ricoma Vision dtg and have issues with getting a print to act right. So I know that this machine will also do dtf and I watched you as I usually do to learn.
This eye opening as I haven’t had a lotta success yet and thought I should try dtf. Please make a video on the Ricoma dtg and its issues, the people should know.
Mine worked right out of the box. It’s all about buying from the right company. Digital Heat FX DTF 12-2 from ColDesi
I have the prestige a3+r. I was lucky in that mine worked pretty good out of the gate. It did have some white ink issues later on though. Black ink seeped in to the white ink dampers somehow.
The same thing happened to me, I had a panic 😱 attack.
We appreciate you I've been watching your videos from time to time just because,your videos are interesting and also you touch bases on the important things like that powdery substance definitely specialist I will highly recommend wearing that mask keep up the great work Buddy.❤ Coming from the oil kids
110% AGREE!!! I bought mine from Swing Design and they would NOT help me set up until i reached out to AA Print supply, they helped me installed Cad link software and helped me how to run the Epson F570. i spent 7700.00 with them but NOOOOO help to get me started when i got them. But im happy with it now all thanks to AA Print supply crew!
Great to know, that was a complany I was looking at purchasing from!
Guess I wont be using swing designs
Exactly. The company you choose to purchase from matters. AAPrint supply my got it done for me and communicated with me the entire time. I had to be patient but they let me know when e could talk and do a remote call.
Oh wow I purchased mine from the too. I emailed since I’m having issues installing Cadlink too, I’m still waiting.
This Channel is Essential✅✅✅
Thank you.
awesome video👍
Excellent dtf printer
I love the way you put our health above the corporations.
Without you there are no corporations.
Thank you for letting me know.
No problem.
@Allan Wade - That oily substance is glycerine that is indeed a byproduct of the adhesive melting. You may even notice it on the transfers after they have sat for a while. I have yet to research the side effects of exposure to it. I am using an Epson F2100 for DTF, which means one sheet at a time and manual powdering and curing. No roll to roll. I should probably be using a respirator.
Dear friend, perhaps you need to learn about a fully automatic powder feeding, drying, and printing integrated DTF printer. I am the manufacturer of the machine. If you need to replace the machine, please give me an opportunity to communicate and cooperate with you! Thank you.
Lol. Dtg-dtf with the sales pitch in the comments. Do you have videos on your channel showing you product.?
Get that respirator Chad. Better safe than sorry. $35 bucks Home Depot.
omg that is true i have one and boyyy it took me 2 weeks to get it right and also u have to clean the line every day even if you do use the printer
can you buy them pre configure to avoid the headache?
When it comes to d t f printers, the problem is just the white ink. All the colors will work without issues. All the DTF companies have to do is give a WINDEX cartridge or just employment a cleaning system🤔 Otherwise great 👍🏿 technology love it.
I love the thing.
I was in the same boat, took about 3 weeks to work out the bugs. With that being said the other issue is sales! Everyone is doing DTF and selling printed sheets for $2!!! I have some of mine in Etsy, fb, letgo, all with shipping available and I think I’ve sold maybe $40 worth in about month! I have monthly payments on my printer of $278 a month my monthly sale of $40 doesn’t even cover the cost of supplies I’ve used lol😂, hope everyone else is doing better then me, good luck people. Stay positive!
Ruben Zuniga. If they are selling for $2 a sheet they aren’t making very much. They are losing $ 😂😮
And did you get it just to sell transfers?
I won't sale them because of how people are low balling prices on their dtf transfers. It hurts the whole industry when they do that.
@@TamiT3 lol 99% are crafters most professionals dont invest in new technology. these company's saw crafters as Fresh meat and they all focused on them.dtf will end up like plastisol transfer (Now called screen print transfer) they will fade out. plastisol use to be $3.00 now their $.15 at the lowest. crafters going crazy over puff,metallic,etc thats been around for 10yrs. even sublimation transfer went down when they started making ciss tanks and selling 100m and higher inks.
Great insight elevated inks. Thanks so much for sharing. Appreciate that.
Mine had a rare defect. They offered to replace it but couldn’t tell me when I could get a new printer. So I’m in the process of doing a return this week.
FACTS!!!!!
Thanks so much for your truth!! Is the software compatible with Mac? Or does anyone know of any that are?
Great vid Allan!
I have one question tho, how much did it cost you (roughly) to start DTF printing?
How fast can your printer print with 2 colors on a 11x17?
I got the A3+ broooooo you ain’t lying you gotta figure it out by yourself , had it about three weeks and now I’m flowing and making money . Cadlink is a crazy learn aswell
Thanks for all the good info, after making my decision , all stores are out of the 3A R plus. 😐 looks like they trying to push the sell on the 4A , now to wait until they get it back on stock
I will be purchasing the same set up as you at the end of the month. I also have several embroidery machines and both the DFT printer/oven will be in the same room as the embroidery machines. Have you noticed if the DTF fumes are in the shirts that you embroider?
Hello friend, I am a manufacturer of DRT printers. Our machines use i3200 nozzles, and the printing quality and machine quality are very good! Can you give me an opportunity to collaborate with you?
You are totally right! Sad to say that I spend so much money for mine and still haven’t been able to make one single good print! It’s been sitting down for months cus I was so discouraged and disappointed! But this video brings me hope to keep trying. Any advice on cleaning a epson L1800 ? Thanks!
That's sad..
Mines worked out the box PERFECT . But had to install a new print head in 5 months
Bro I've looking into doing DTF currently sublimating. But as far as DTF printer have in dis video do have a video about maintenance or could u tell me bout it plz
I just found your channel. Would you recommend this DTF for a beginner just starting to build a DTF business over the Revel 2402?
omg lol this sounds like hell, I already have anxiety before I have the printer haha
which one dtf to buy best ?
I was told by our vendor that the residual oily substance is called “glycol”. They said it forms in the condensation of the powder.
Thanks for the video damon waynes
😂😂😂😂 your welcome.
Ok, I agree & some I disagree. I have the exact same one you have.
1. My first one had a broken piece in the machine. You, being an influencer, will have better customer service available than a small business like mine. After 6 weeks of trying to get calls back and the issue resolved. I did a youtube video discussing the issues I was having, so be careful who you buy from. The next day, I received an email that my replacement printer was on the way. 2. I bought a large dehumidifier that helped the machine not have as many problems. 3. Every day, I shake the inks. If I do not, & miss 1 day of printing it takes forever to get it up and running. 4. If you do not print everyday, detailed graphic images I wouldn't spend the money. I love designing start to finish so i don't mind the extra work. Every issue is another 30 to 45 minutes of researching how to fix it. Today it was how to reset the waste tank setting. I print roughly 15 to 25 prints a day. Personally I love the printer. Just know it will take patience. The company is not as responsive to a small business's like myself. Once again a awesome and truthful video from A Dubb!
I don’t think me being an influencer made a difference. If that was the case why would I have had the experience I had? Check the date of my unboxing video till the next time I made a video actually printing. At least a month. You think that’s preferential treatment?
After they fixed mine I’ve never had any issues. Never had to shake my ink. The A3+R actually has a self agitation system. Mine sits sometimes and i just do a print head cleaning before i print the next time and I have no issues. Had to draw white ink with the syringe shine once but that’s about it. Been working fine.
The company you decide to purchase from definitely makes a difference. Aa print supply was ok. Could have been better but they got it resolved. Not was fast as i would have liked but they got it done. Just trying to let people know what they are in for based off of my experience. This was not preferential treatment.
@adubbproductions sorry I offended you. You took that personal. In no way did I mean it that way. Simply said, you have a following, you inspire others to buy
products the companies sell, if not directly, then indirectly. People see these machines via your channel, the company benefits from your videos. They make sales from your demonstrations of their product. Sometimes even giving you equipment for you to show others. There is nothing wrong with that. That is simply the way business works. I'm happy for all the influencers on here and have made great friends. I am not an influencer, just something i didn't want to try, I'm not good at that. I watch to learn, encourage others, and I thought to be encouraged, to watch the equipment you and others use to see if it fits right for my business. I have learned many things from you. The main point was missed of MY OPINION, to others if they are looking at dtf. That took a whole other meaning than what I was commented.
@@TamiT3 you don’t offend me at all. Don’t take it that way. I’m just t try but to reason. I made a video about the experience i had. It wasn’t a pleasant one. Lol. So i just think it didn’t make sense to me that you thought i might have gotten that treatment when i just made this video about what to expect. I wasn’t offended just trying to reason with you. Sorry if you took it that way.
Hey Wade, any recomendations on where to buy one? I'm in Nairobi.
Where did you purchase yours? And for how much ?
Me and a local screen printer were having words about maintenance. He kept telling me 30-40 minutes of cleaning ain’t worth the time or clearing clogs. I said labor of love. I wear a mask all the time and vented fumes outside the building with an inline booster. I always wear gloves and a garment.
That sounds like my dtg. I’ve cleaned this thing once and that’s it. Printed well over 500 transfers already. Idk. Everyone seems to be having different experiences.
What brand do you have?
So DTF is similar to heat press transfer old machines? Its not like DTG?
No issues but it helped to have had the old dtg machine that never worked for us. Dtf printers have to be used daily.
I absolutely agree with you.
How much is the maintenance, ink ie?
I remember watching a Martha Stewart segment in which she recommended to everyone that they buy a wheel of cheese, for $4000. "If you budget permits..." sounded just like that Martha Stewart segment.
You are absolutely right, But i am tired of trying to deal with Procolored I'm disgusted with their services and their machine.
Not considering cost, if I presently have a good press, does DTG take up less room that a DTF?
That depends on the machine you using. You got the converted joints that are small all the way up to the big boys
i have a procolored machine. the first couple weeks i needed to buy a new print head now the only problem im having is the white doesn’t align with the color
That’s terrible. No idea why it might be doing that.
Does anyone have their DTF printer in their garage? Is that enough space to air out or for ventilation? I know a respirator is needed and I agree.
where should i purchase
Are you talking about 2 to 3 weeks when starting up or this is a time issue to hsve to deal with after you've set up the printer? Im think when i get order's if they are having to wait 2 to 3 weeks just for me to make the order thats not good time to send out. I am just looking online to purchase everything i need to make my apparel designs. I guess what im wondering is, what printer is worth the price but not so complicated?
All dtf printers are going to be complicated to a person just starting off. The one I found easiest to use was my Ricoma Revel 2402-T you must know that by the time I got that machine I had already previously owned two other dtf machines so I was experienced in the technology. You can’t compare that to someone that hasn’t owned and operated
anything. It is not realistic for you to expect to get any machine dtf, dtg. Sublimation, embroidery and be filling orders right away. No matter what you divide you are going to have to spend time and learn how to to use whatever you get before you fill your first order. In the meantime just use people like me to fill your transfer orders.
www.allanawade.com
I can't find the printer anywhere.
None of the links in the video are for the printer.
We are ordering DTF's because we don't have a printer yet. I do have a sublimation printer and a good embroidery machine. Could you comment on the white toner DTF machines? I just saw a video from HPN on them. No oven, no powder sounds great; but is it really good enough? I know you will be honest. Thanks.
No. Dtf is better. Better feel better colors at a lower price. Plus you don’t have to marry the sheets which is super time consuming and difficult to get perfect every single time.
White toner has its advantages such as applying to hard surfaces but it’s not touching dtf as far as garment decorating quality of feel and look.
Hey just wanted to say, I just got some screen printing equipment....free! Looks like i have everything here! Someone dumped it last night and I picked it up this morning 😅
Huge score. Congratulations.
Mine has worked with no issues only problem I really see with DTF is that it cracks with the first wash any tips what I can do differently to make sure they don't crack anymore???
I seen something called protective coating but I don't really see anybody explaining it in a video and I don't want to buy something that I don't know how it works
im trying to start , which printer do you recommend? the prestige R2 or procolored L1800?
Definitely the Prestige R2 out of those two options. Even though I’ve never used the pro colored dtf system i am familiar enough with the L1800 model and i would say definitely not for that one. The R2 hands down. Now even though I don’t have and have never used the R2 i know for sure it is significantly faster than the L1800 and I am close to people that have it. It’s a good system as long as you take care of it properly.
I'm starting a clothing brand and don't want to use third party at all. What printer would you recommend for me to buy with everything you have tried. I have a whole room to dedicate to this and have some customers requesting customs on a regular basis.
You are 100% right! How do I keep my shorts from cracking? Anyone know any secret 😭😭😔
I have the uninet 1k and have issues with my white. Did you struggle at first ?
Yes
Damn bro, you saying these things don't work right the box the same issues I been having with engraving lasers too. Seems all these things have same issues across the board. Wild.
@AaronLeuppeth I haven't had any issues with my laser cutter at all and my new dtf printer works flawlessly. I've had it for idk maybe 6-7 months now. It's amazing.
i follow a crafter who had the one from china and she sent it back because it don't work , she now has the prestige and says she love it
Yup. My team member got one from China abs hers works great. Craftable things got once fro. China and hers working fine. Idk.
I remember when i bought mine it took almost 12hrs before i got the first artwork printed🤣
I was just thinking about getting one. I am a new business do you think it is better to just order transfers or get one
I posted before I watched the video 😂
i wonder how many people do n that. It’s ok. So based in what you saw what did you decide?
For my use, I'll continue to outsource until they come out with a "user friendly" dtf printer.
Once it is up and running it is user friendly it’s just the initial set up. Some people are saying that they had no issues. Now I print with it all the time and it is very easy to use.
Do you feel the DTF is as vibrant as DTG? I've experienced a muted look,. but this is from a DTG printing on to DTF slides. Like you said its trial and error; I"m considering buying a DTF and would really like to get a high production unit, problem I've found for production is they're in the 26k range :(
Yes. once you get your dtf setting dialed in you can get extremely vibrant prints. I’m loving it more and more all the time. You can print almost as vibrant but it’s not quite dtg. It’s a good alternative but it’s not it. Dtg is better in my opinion but not having to pretreat and your images look great on a shirt and being able to sell transfers is amazing. 26k is a small price to pay if you consider what you are getting and what you can do with it.
@@adubbproductions thanks for the insight brother 👍
My DTF printer worked out of the box no issues to begin with. The only issue i have is that the white gets clogged right away. Anyone have any pointers to fix that
I’m not having white clogging issues. I suggest doing a head cleaning and nozzle check everytime you are about to print. That’s what I do. Never have any issues.
What printer do you have?
@@kenishamckenzie7092 I bought mine from procolored. I have the A4 printer.
But it has some amazing prints
I have an erasmart 1390 such a headache. The company don’t help you unless you tell them you are buying something
That’s why it’s worth buying from a reputable company that has good customer service.
you did not mention the setup? wich machines are those?
The setup was difficult to me. This was the prestige A3+R
Looking in to getting in to printings shirts. My question is why didn't you go with a machine that was DTG and DTF?
Well, I already have 2 Ri1000 dtg printers. So dtg is covered. But when making DTF prints it’s very difficult if you are printing out large quantities on a dtg printer. With the dtf printer you have the roller system and you can press print and walk away nd come back to 20 or so DTFs. With the dtg you gotta powered each one individually and put it in an oven then take it out and repeat for each print. What if someone orders 50 or 100. That’s a lot of labor. I’d rather set up my dtf connect it to the shaker oven press print and walk away.
Show us some of the things you had to do to get up and running properly
What i did was contact Aa print supply and let them access my computer and they did a bunch of things that I know nothing about and it still didn’t work so they sent me a different printer. I can’t show you what I don’t know. I can only tell you what i do know. It didn’t work.
What is the best printer for t shirts and hats ?
The Prestige L2
Is this really DTF transfer? How does it not have that sticker plastic look?