How To Build A Vocal Booth for only $1561.85
Vložit
- čas přidán 11. 06. 2021
- This is how I built up my Soundproof Room DIY Build. I DO NOT GO INTO SPECIFICS on how I did everything step by step BUT, I've Made A Full 2.5hr video on this in full depth!
• I Built A Booth for $1...
Amazon Links for Some of These Items Listed Below
(1) 5lb 3 Inch Screws - $29.97
amzn.to/3W5Ez0k
(29) 2x4x96 Whitewood Studs - $173.42
(13) MORE Whitewood Studs - $77.74
www.homedepot.com/p/2-in-x-4-...
(1) Kreg Pocket Hole Jig & Clamp - $26.15
amzn.to/3k7VZwc
amzn.to/3Xju7U0
(2) Kreg Pocket Hole Screws - $48.72
amzn.to/3W9H5mh
(50) Iso Joist Clips - $128.70
amzn.to/3XGN6bF
(1) OSB Sheet T&G 23/32 - $37.68
www.homedepot.com/p/23-32-in-...
(3) Rockwool Bags - $154.71
www.homedepot.com/p/ROCKWOOL-...
(3) Subfloor Caulking - $11.94
amzn.to/3GyAwE7
(3) Drywall Screw 1LB 1 5/8 Inch - $17.94
amzn.to/3QxFyFw
(1) Staple Gun Kit - $15.99
amzn.to/3Zs0Jgh
(1) Cloth - $11.89
amzn.to/3IQcveq
(1) Razor Knife - $13.99
amzn.to/3kbQwEH
(1) 1 lb 3.5inch Screws - $10.36
amzn.to/3W415a7
(15) 4X8 Drywall 5/8th in - $194.70 ( 2 left over )
www.homedepot.com/p/USG-Sheet...
(2) 18 lb Joint Compound - $18.96
amzn.to/3iy1aoQ
(1) Stucco Tape - $4.97
amzn.to/3iulYNS
(1) Sanding Sponge - $8.98
amzn.to/3GBYDSA
(1) Paper Tape for Drywall - $2.37
amzn.to/3XkMTLv
(1) Drywall Tee Square - $16
www.homedepot.com/p/Empire-48...
(1) 6 Inch Joint Knife $9.96
amzn.to/3XmfPlJ
(1) 4 Inch putty knife $9.98
amzn.to/3D4DkZ1
OR Putty Knife Set: amzn.to/3GZVoWc
(1) 10 x 100 Plastic Sheeting - $59.98
amzn.to/3GCkNnt
(1) 10 pack duplex and wall plate - $23.00
amzn.to/3CIHZQ2
(1) Gang box - $2.98
amzn.to/3vUMzqn
(1) GG Noise Seal - $19.99
amzn.to/3w1xbsg
(1) AC Infinity Airplate T7 - $69.99
amzn.to/3QFAzCY
(1) AC Infinity Airplate Extension fan - $39.99
amzn.to/3CDvx3W
(3) Door Jamb planks $38.88
www.homedepot.com/p/Woodgrain...
(1) 3 pack door hinge $10.78
amzn.to/3GZUVDM
(1) Solid Core Door SLAB $79.80
www.homedepot.com/p/Masonite-...
(1) Quiet Walk Underlayment 100ft - $49.98
amzn.to/3X0Yu1U
(1) Flooring spacer Kit - $ - $20.98
amzn.to/3ixFbOS
(1) Floating Floor Glue - $10.21
amzn.to/3W2RSif
(1) Chisel- $10.97
amzn.to/3IJIr4s
(1) 2 In x 18-gauge brad nails (1000 per box) $7.48
amzn.to/3CHIV7n
(1) 36 inch slide on under door seal $12.98
amzn.to/3vSIJhL
(2) Quarter Round Molding $19.98
www.homedepot.com/p/Woodgrain...
(2) Woodgrain Molding $25.04
www.homedepot.com/p/Woodgrain...
(3) Door Stop Molding $17.07
www.homedepot.com/p/Woodgrain...
(1) Door Knob $18.99
amzn.to/3itlxUe
(1) Door Lock Installation Kit $34.99
amzn.to/3XjwEO0
$1561.85 Total
If I missed anything.... Whoops.
Like Fav Sub! Thank You All! ^_^
Like, Subscribe, & HIT THE BELL!! 🔔
♪♫♪ To Learn EVERYTHING On Making Music: JustinOmoi.com
► Spotify: open.spotify.com/artist/3t2v2...
#vocalbooth #diy #howto - Jak na to + styl
yo bro im so proud of you honestly love you cuz happy you made something with your own money and your own hands your dad should be extremely proud keep it up cant wait till u create some fire in that booth
Thanks Cuzzo :P
you are a hero, good work man
done a good job mate, and you look really happy with your result
Thanks! And yes! I love it ^_^ No complaints at all!
Proud of You Justin 🙌🏻
Thanks ^_^
Thank you for making this! Very informative!
No problem! I hope this gives you some info and insight for the future!
A lot of work. Glad you finished it. Looks great. Peace
Thanks ^_^
great video, im about to attempt a build next week myself and im studying up hoping i do it right. new subscriber here. cheers!
damn bro u have been inspiring me since the beginning. it's so dope to see ur content evolving.
Glad that I can inspire ya =]
Although, I don't recommend going the same way that I've been at it. Definitely having a job will make what I did here in like 5 Years shrink down into like.. 2 Not building the booth in 5 years (lol) but I'm talking about all of the gear investments in general.
You got this!! 😁
Mad extra-paint-taking-out skills! :D
great video loved the walkthrough
Thanks =]
You are amazing! I’m building a vocal booth for my book narrations & this was helpful AND entertaining! I wish we could hang out!!!
Cool!
Looking good man! Looks like a lot of work... you got it righteously done though.. getting ready to turn the garage into a creation station this week. Right on time 👌 👌 👌
Good luck with it =]
Thanks! ^_^
@@OmoiSenpai does this booth have bass trap and would you say it's highly sound proof quality?
Grate job thanks for sharing
Thanks =]
that mega man fat head/wall sticker is sooooo sick. sick video man 🫡
Thanks, but that Megaman was something I drew and painted on the wall, I think it was my 3rd time doing it, because I had to cover it up with paint.
I love the Megaman 8 cover art pose.
👌✨🤩 nice
This guy is multi talented
This man worked half the video in flip flops
Flip Flop Gang!
😊
👍🏾
this was great! have you seen Irko’s studio building series?
Thanks ^_^
Nah. I haven't seen his videos. The only CZcamsrs who'se videos I've seen, was a man who'se channel name is True Sound Studios, And someone else, I think his name was Jon Sine. I seen a few of his as well.
find freewood at a local woodshop the throw out stuff like that at least they do in ct and mass
Plz tell what acoustic treatment u hv Done with this..?
🤙🤙🤙
Hey man
This video was super helpful :D
I May Build one in a year or so haha
Will you add more lights or LED strips to it cuz some light would be nice you can record in it cuz it looks sick haha
Glad it helps ^_^
I do want to put in lights, thinking about LED. But my major concern, is if the LED lights will create a buzz noise sound. That's my only worry this whole time. Oh, that, as well as where should I place it xP
Maybe a nice corner floor lamp type of light would be cool if anything ( for now )
@@OmoiSenpai yeah I Know what you mean , for the place i would say on the corners would look sick , but as you said it may interfere with your recording , don't they sell LED for producers that doesn't have this issue ?
I honestly have no clue :P The only one that I kept hearing about is the Philiphs Hue brand.
@@OmoiSenpai Do your research and go for it cuz honestly LED would be better than a normal light
You deet eitt!
Yeee :D
Where did you get the acoustic foam from? Every site I’ve found has a minimum of 48 pieces for the color purple
The acoustic foam that I bought was from Auralex, specifically, the Roominator Kit. I hav a link in the description for it.
Jay Chandrasekhar, you look exactly like him!!
He's probably my Uncle low Key!
the amount of screws used on the plywood floor 😂
Shieeed! Anything and everything to prevent a future squeak! x)
Hey, how do you make the vent holes as soundproof as possible?
The best thing I was able to do with mines was to throw a Magnet on to cover it up when I'm ready to record.
what program did you use to create the framing layout?
I used a very old version of AutoCAD from back in my Highschool days. Has to be like 10+ Years ago now.
If anything, just a paper, pencil, and ruler will do too!
Justin bro that's karim , congrats I'll make one too 🇩🇿🇩🇿❤️
Karim from Clermont side? Either way, I see ya ^_^
@@OmoiSenpai no bro from Algeria but following you since more than 7 years
@@OmoiSenpai i learned a lot from you when I was young .. one day i remember you did a tutorial about how to turn down your metronome volume while you recording ..i remember it same like today
commenting for algorithm
what size is the booth?
Hey! The *Internal* size is around 4ft x 4ft 2in x 6ft 9 in high. Definitely not set for the golden ratio, but it works within the limitations of the room I am in, especially when treated with acoustic foam.
How sound proof is it? Does it stop sound comming in and out?
It's VERY Soundproof lol. It would have been perfectly Soundproof had I not cut those 2 Vent fans in there, BUT you're not going to hear anybody playing a TV Loudly in the Living room.
If I could have made the booth bigger though I would have because being too close to the corners with the mic can cause a boxy sound. Thankfully it's not an issue for me.
Also to note: I do have 2 Magnet Plates that I put over the vents when I go in the booth, so it does the job! I did install an AC Vent opening at the top, but there is no noise the way that I snaked the air ducting.
@@OmoiSenpai Let Me explain My situation and then if You could tell Me if your booth would be the solution. I live in a small block of apartments and I can hear My nabors alot to the point where it would ruin My recordings. 1 next doors I can hear him talk, shout sing along to loud pop music, 2 the guy above him is a rapper, I can hear him rapping and loud Bass music. 3 guy above Me drops stuff on his floor bangs about shouts. 4 next door has deliberately tried to disrupt My music production by banging on My wall and shouting at Me to shut up, despite him singing like a drunken fool plasting pop music regularly. 5 I can sing very well but I dont want to sing in My apartment because if I can hear them, they can hear Me and all the noise mentioned above is not only off putting it ruins My recordings. I want to have a booth like yours, shut the door use My monitors and sing and do voice recordings without them hearing Me or Me hearing them.
Bro how to make vocals fat bro,not double tracking but the vocals sud be fat,and how to make a suitable beat for an Acapella ??I am stuck broo, plzz help me
@@OmoiSenpai bro can u pleace cheack my beats ,it sounds robotic and I want to make it human feel
I'll make videos on that in the future =]
Love the jokes 😂
Thanks ^_^
There are tenants living in the basement and sounds travels really easily so I can't have a recording booth :(
If you go to the extreme like I've done here with a subfloor, iso clips, and the rock wool insulation, it would deaden that sound nicely.
But I'd understand how it be. I was born in NY, and lived in both a house and an apartment that had ppl above and under me :P Noisy Noisy for sure!
Which State Dollar Sir
USD is the currency I am using here.
@@OmoiSenpai how much rupees in Indian currency 💵?
mine aint perfect but its efficient
As long as it gets the job done! ^_^
gang
LOL, YOU Funny
:D
@@OmoiSenpai does this booth have bass trap?
time marks would be much appreciated
Time markers would be too quick the way that I presented this video unfortunately. I do have a playlist where I go in depth on the steps I did to make the booth. Should be at the end card of the video.