WeatherTech StairEdge: Installation

WeatherTech StairEdge helps increase traction on indoor stairs for people and pets.
With your purchase, you should have received: five WeatherTech StairEdges.
To ensure your StairEdge is centered, we recommend using a measuring tape and painter's tape to measure and mark each step.
Before installing your StairEdge, make sure your step is completely clean and dry. Then place your StairEdge in the desired location on your step with the wider side on the top and the shorter side up against the front of the step.
Once in the desired position, place a piece of painter's tape next to the left side of the StairEdge to mark its location.
Underneath the StairEdge, from the left side, pull back the adhesive backing on both strips of tape, approximately two inches, creating pull tabs. Place the StairEdge back onto the desired location, aligning it with the previously placed painter's tape and ensuring that the inside corner is firmly against the corner of the step.
Now, while holding it in place, begin removing the backing from the adhesive on the top of the StairEdge, pressing firmly against it as you move across the top of the step.
Then begin removing the backing from the adhesive at the front of the StairEdge, pressing firmly against it as you move across the front of the step.
Repeat this process on additional steps and your WeatherTech StairEdge is now installed.
For more information or questions on installation, please call 1-800-441-6287 or visit www.weathertech.com