I was going to suggest using the breather as a fill, but you already thought of that. You need to oil the cables to prevent rust and it will help with the wear.
I was more worried about you snapping that tap by torquing on one side only. Could you put a second tee in one of the lines and also lube that cable with it? Bill
hi there well my first M18 drill was WAS 100 TIMES BETTER , alot more power .this one is junk , my first circular was alot better , my first inpact driver was better , then i bought a m18 chain saw with 2 -12.0. batteries . my 5.0 battiers that are over 12 years old are still working .the 12 .0 batteries neither made it 2 years , they were sent back would not cover the warranty or tell me even why , they have no where near the quality of what the first ones did , john
HI JOHN 😊😊 theres nothing made like it use 2 be no more cheap throw way junk theres no more good steel either even that is 2ND grade steel U are suppose 2 cutting oil 4 metal the old black and decker and rockwell drills are better than that they have a chuck key 4 them when U tighten the collar its tight the drills 2 day arent made the same way no more either 😮😮 OMG 5 3O 2O24
I was going to suggest using the breather as a fill, but you already thought of that. You need to oil the cables to prevent rust and it will help with the wear.
Great stuff John. Don't think I have ever seen you flustered as you were. Thanks for sharing. I know you will persevere
hi there i got it , thanks for stopping in and watching ,john
When john is pleased, that means progress. Thanks.
hi there i think you may be right .thanks for dropping in john
Good one. Movin ahead. 👍🏻
hi there got a little bit done today then something came up , thanks for stopping in and watching ,john
I was going to suggest using the breather as a fill, but you already thought of that. You need to oil the cables to prevent rust and it will help with the wear.
hi there i do oil the cables just with a squirt can , thanks for stopping in and watching ,john
Its just as exciting as I was doing it myself and having the misc problems you have
hi thanks for dropping in john
You got gremlins. That is why things go missing or get moved.
hi there thanks for stopping in and watching .you may be right ,john
I was more worried about you snapping that tap by torquing on one side only. Could you put a second tee in one of the lines and also lube that cable with it?
Bill
hi there you know that would be to easy ,thanks for stopping in and watching ,john
If you weren't wanting to get it over and done with and already had everything together you would be done before you knew it.
hi there i think you are right . thanks for stopping in and watching ,john
it's not the drill it's the operator☹
hi there well my first M18 drill was WAS 100 TIMES BETTER , alot more power .this one is junk , my first circular was alot better , my first inpact driver was better , then i bought a m18 chain saw with 2 -12.0. batteries . my 5.0 battiers that are over 12 years old are still working .the 12 .0 batteries neither made it 2 years , they were sent back would not cover the warranty or tell me even why , they have no where near the quality of what the first ones did , john
HI JOHN 😊😊 theres nothing made like it use 2 be no more cheap throw way junk theres no more good steel either even that is 2ND grade steel U are suppose 2 cutting oil 4 metal the old black and decker and rockwell drills are better than that they have a chuck key 4 them when U tighten the collar its tight the drills 2 day arent made the same way no more either 😮😮 OMG 5 3O 2O24
hi there lots of good points , thanks for stopping in john
I was going to suggest using the breather as a fill, but you already thought of that. You need to oil the cables to prevent rust and it will help with the wear.
hi there thanks for stopping in and watching ,john