I cried when I saw how easily you designed the house. This was something I've always wanted to do for a career. I'm now a granny and had a lot of fun designing my first house design with Revit. My grand kids are amazed by your videos. thank you!
Thank you sir for this wonderful tutorial, I'm an aspiring architect and you made my own design easier to understand in regards to working it on Revit.
That's good brother, later on you will be designing a better looking house than mine, I hope you can share it with me so that I can post your progress to the community. 👍😊
I'm new to revit but i really learnt sooo much from watch your videos! Keep it up! Just a quick question, if you could help me figure out where did you get those fancy doors and windows? Mine is just standard doors and windows. Thanks in advance!😁
Hi Harry, if you check part 1 of this video series there is a link there where you can download the doors that I used here. For the windows, I know I only used curtain wall. Thank you 🙏🙂
Hi Mara, what you do is click "View" then "user interface" then check back properties there, same goes to if you closed project browser. thank you for supporting the channel. 🙏🙂
for the second layer...when I make the walls..under the 3D being option to make it look realistic the walls become transport almost like a curtain wall even though I didn't copy that? also for the underlay... I have it shown right but no unlay is coming through...
Hi Erwin, you dont need to add reference line as for the doors and windows, it is set in the levels. They will automatically be added on the floor unless you put an offset. That is same with windows, sill height option 🙂🙏
How does one go about amending a Revit model that has been drawn on the wrong level? I've gotten to 12:01 in the second part of this house build and realised that my levels started at 0 not at 1, meaning that my levels are incorrect. In searching the web, I know I can adjust which levels my walls are attributed to, but is there any way to have the entire level (windows, doors and internal walls included) moved to an alternative level?
Hi Melanie, what you can do is select everything and under modify tab, beside the PASTE there is COPY TO CLIPBOARD, after you click that, click PASTE then select Align to selected level. Make sure you have the levels created first so that you can see it on the list. 🙂🙏
how do you make it so that your dimension lines automatically snap to the centerlines of objects such as walls and doors. mine are snapping to the nearest snappable point.
Hi Forrest, Unfortunately I dont actually know the answer to that as I just click the dimension and it is already set to the nearest snapping point. But sometimes I do adjust it. I will look in to and and let you know if there is some settings you can do. 🙂🙏
@@ArchCoreDesigns Thank you! I figured it out by diving through the settings. If I can remember where it was I will post it in case anyone had the same question.
@@ArchCoreDesigns So to access the feature I was asking about you should go to the Manage tab > Additional Settings > Annotations > Temporary Dimensions. After that a small window should pop up with options on how your temporary dimensions should behave i.e. Walls snapping to Centerlines or faces etc., the same goes for the doors and windows as well.
Hi Horace, if you can send me an email and I can send it to you directly. I think you will need to unblock it from your end but just send me an email and I will send it thru that. 🙂🙏
For a step by step video, there are some pointers which aren't mentioned. Like going on to level 2, my walls on the level 1 do not show and the instructor does not say what to do in that scenario. Otherwise, thanks for the tutorial
Thanks Walubo, yes definitely we need to improve more. What you do is go to your properties on the left side. Look for underlay and put it to base level 1.
I'm very new to Revit, and this has been more beneficial then university.
Thanks Douglas 🙂🙏
I cried when I saw how easily you designed the house. This was something I've always wanted to do for a career. I'm now a granny and had a lot of fun designing my first house design with Revit. My grand kids are amazed by your videos. thank you!
Thank you Janice 🙂🙏
I'm learning and having fun with these. Thank you very much. A good way to get familiarized with the stuff regardless of how overwhelming it may seem.
Thanks Jerard 🙏🙂
Thank you sir for this wonderful tutorial, I'm an aspiring architect and you made my own design easier to understand in regards to working it on Revit.
Thank you, I appreciate the comment. 🙏🙂
Thank you Arch Core Designs, you always teach us peacefully, really enjoy to watch it!happy new year!
Happy new year Cathy and thank you for the support. 🙂🙏
Part 2 done.
Its getting more easy after i spent so much time on curtain wall and mullion in the previous series.
Nice video man!
That's good brother, later on you will be designing a better looking house than mine, I hope you can share it with me so that I can post your progress to the community. 👍😊
@@ArchCoreDesigns i will send it to you after rendering
I will share it will everyone. 🙂🙏
Thanks for taking the time to make this tutorials, they are really helpful!
Thanks Lunaire 🙂🙏
You're the best. Thanks so much for these.
My pleasure! 🙏🙂
Thank you very much Sir🙏. These are really helpful to me. I'm so glad I found this channel.
You’re welcome May and welcome to the channel 🙂🙏
Thank you for your lessons ! Nice music
Thanks Vlad 🙂🙏
I'm new to revit but i really learnt sooo much from watch your videos! Keep it up! Just a quick question, if you could help me figure out where did you get those fancy doors and windows? Mine is just standard doors and windows. Thanks in advance!😁
Hi Harry, if you check part 1 of this video series there is a link there where you can download the doors that I used here. For the windows, I know I only used curtain wall. Thank you 🙏🙂
@@ArchCoreDesigns Ahhhh i see thank you sooo much for the help! Looking forward to learning more from your videos!😁
Thank you Harry 🙏🙂
i like the music in the background sir
🙏🙂
THANKK YOUUUU!!!!!
Thanks Ozteker 🙂🙏
Impressive!
Thank you 🙂🙏
❤❤
Thank you 🙏🙂
Fantastic stuff !
Thank you Marc 🙂🙏
this is so helpful! thx
Thanks 🙂🙏
How did you make your grids hidden on 3d view and not on the floor plan? thank you.
You make them on the floor plan, it is just visible in the 3d view.
I have question if someone make a mistake by closing the properties side how can ge open it againt
Hi Mara, what you do is click "View" then "user interface" then check back properties there, same goes to if you closed project browser. thank you for supporting the channel. 🙏🙂
for the second layer...when I make the walls..under the 3D being option to make it look realistic the walls become transport almost like a curtain wall even though I didn't copy that? also for the underlay... I have it shown right but no unlay is coming through...
Hi Ryan, If you can send me the file at archcoredesigns11@gmail.com I might able to see and fix the problem. 🙂🙏
@@ArchCoreDesigns okay I did..get back whenever you can
Thanks and I replied to your email. Let me know if that fix it. 🙂🙏
Thanks very mutch for this series!! Where can u find that type of door, I dont have it in my revit, is it a pluggin?
Hi Francisco, check part 1 of this video series. I have a link for download there. 🙂🙏
Very good
Thanks Addy 🙂🙏
oky part 2 done , will continue next morning
You can do it 🙏🙂💪
Why didn't copy the curtain wall after you set the base and height??
Hi Hyperloop, that was an older video series 🙂🙏
There is no free verison of Revit, is there?
There is not, but if you are a student, you can get 1 year free version. Thank you 🙏🙂
Thank you so much for the video, but I have a question, when I switch to level2, I can't see the walls from level1?
Thank you Captain. So go to properties, look for underlay. Set your base level from none to level 1. Let me know if that worked. 🙏🙂
@@ArchCoreDesigns Thank you for your answer, but still doesn't work.
Change your view range and also check visibility graphics (vg). If it didn’t work, email me your file and I can check it. archcoredesigns11@gmail.com
@@ArchCoreDesigns still doesn't work, I emailed you the model, thank you.
I saw the email. I will look in to it. 🙏🙂
Hi sir how can I put a reference line to identify the correct height of doors and windows like a guideline?
Hi Erwin, you dont need to add reference line as for the doors and windows, it is set in the levels. They will automatically be added on the floor unless you put an offset. That is same with windows, sill height option 🙂🙏
How does one go about amending a Revit model that has been drawn on the wrong level? I've gotten to 12:01 in the second part of this house build and realised that my levels started at 0 not at 1, meaning that my levels are incorrect. In searching the web, I know I can adjust which levels my walls are attributed to, but is there any way to have the entire level (windows, doors and internal walls included) moved to an alternative level?
Hi Melanie, what you can do is select everything and under modify tab, beside the PASTE there is COPY TO CLIPBOARD, after you click that, click PASTE then select Align to selected level. Make sure you have the levels created first so that you can see it on the list. 🙂🙏
Hey, can you please tell names of websites from where we can download Revit blocks?
It will be a huge help.
Thank you :)
Hi Sanya, I go to revit city, also revit has some when you click insert and when my project is in Twinmotion I get blocks from 3D warehouse. 🙂🙏
when i switch to level 2 ( at 0:47 ) i can't see level 1 under it. I could not find any solution. Can anybody help me?
Go to properties and look for underlay, set base level to level 1. 🙂🙏
how do you make it so that your dimension lines automatically snap to the centerlines of objects such as walls and doors. mine are snapping to the nearest snappable point.
Hi Forrest, Unfortunately I dont actually know the answer to that as I just click the dimension and it is already set to the nearest snapping point. But sometimes I do adjust it. I will look in to and and let you know if there is some settings you can do. 🙂🙏
@@ArchCoreDesigns Thank you! I figured it out by diving through the settings. If I can remember where it was I will post it in case anyone had the same question.
Hi Forrest, yes please do post here so that we can share the knowledge, thank you 🙏🙂
@@ArchCoreDesigns So to access the feature I was asking about you should go to the Manage tab > Additional Settings > Annotations > Temporary Dimensions. After that a small window should pop up with options on how your temporary dimensions should behave i.e. Walls snapping to Centerlines or faces etc., the same goes for the doors and windows as well.
Thank you Forrest for that. 🙏🙂
I blocked the download after saving the download files in the previous video. How can I unblock and download again?
Hi Horace, if you can send me an email and I can send it to you directly. I think you will need to unblock it from your end but just send me an email and I will send it thru that. 🙂🙏
Hello, thanks but it’s Revit2019?
Unfortunately Revit is not backward compatible 🙏🙏🙏
My level 2 only shows the grids 😭
😊OK I changed the underlay from level 1 to level 2.👍
Yes underlay or sometimes view range are the one needed to be change 🙂🙏
For a step by step video, there are some pointers which aren't mentioned. Like going on to level 2, my walls on the level 1 do not show and the instructor does not say what to do in that scenario. Otherwise, thanks for the tutorial
For anyone who also got that issue, simply press VR (View Range) and change view depth level to unlimited.
Thanks Walubo, yes definitely we need to improve more. What you do is go to your properties on the left side. Look for underlay and put it to base level 1.