FOXTECH T3500 Plus 3500W Tethered Power System

FOXTECH T3500 Plus 3500W Tethered Power System
www.foxtechfpv.com/foxtech-t3...
This is a new Tethered Power System-T3500 Plus!
Compared with the previous version, T3500 Plus Tethered Power System has a small volume, supports high-voltage compensation and optical fibre transmission.
Tethered power system is designed to provide unlimited, reliable and redundant power source for drones, overcome the limitation of flight duration and payload capacity. The ultralight onboard power replaces the battery, enables you to fly as long as required without worrying about landing to change batteries.
The tethered power supply system transfer the 220Vac power to 400Vdc required by the onboard power, then transfers 400Vdc back to the 12s lipo battery to supply the power for the drone or onboard equipment.
The total supply power of the power system is up to 3500W.The initial voltage adjustable range is 380V-400Vdc, high-voltage compensation voltage adjustable range is 400V-450Vdc. According to the set voltage range, the tethered power system can provide voltage compensation for large payload aircraft.
By using the onboard ethernet to optical fibre converter, it also can realize video transmission(coupled with ethernet version camera like EH314 ), and the video can directly display on the computer by using a optical fibre to ethernet converter, it's necessary for confidential data transfer.
This tethered power system coupled with commercial drones can be applied in many different fields by loading different equipment. Mainly used as relay station,long time observation station in the air etc.
T3500 Plus Tethered Power System is suitable for various drones like GAIA 160S hexacopter,GAIA 160MP hexocopter,RHEA 160 hexacopter and also suitable for DJI Matrice 200 and DJI S900 etc.
Specification:
Ground Station Weight: 30kg
Ground Station Size: 50x40x35cm
Onboard Unit Size: 22x9.5x4.4cm
Onboard Unit Weight: 700g
Cable Weight: 1.8kg
Cable Length: 110m
Output Voltage: 12S
Output Power: 3500W
Voltage Input: 220Vac 50Hz
Onboard Unit Voltage output: 50V
Tensile Strength: 50kg
====================================================
Know about Foxtech from:
Official Website: www.foxtechfpv.com/
Facebook: / foxtechhobby
Facebook Group:
/ groups
CZcams: / foxtechonline
RCG: www.rcgroups.com/foxtech-hobb...
/ foxtechaero

[@AboveandBeyondGlobalDrones]

So the Gloves are to prevent Static electricity discharge. Fiber Optic Tether for video OSD , Also now one must add the power regulator and Ethernet VTX systems to their UAV. Are these for specialty UAV's only?

[@CarrieDingUAV]

Hi. T3500 plus Tethered system is compatible with all kinds of industrial UAVs. As long as your drone's thrust is more than 3kg, it can be customized. welcome to contact via email for more support: [e-mail]

[@sampathkumarchiruthoti9288]

Can tell me the Which type of Tether using

[@CarrieDingUAV]

Hi, Sam
The cable is special customized material .
Cable Weight: 1.8kg
Cable Length: 110m
Strength of Extension: 50kg
Welcome to contact for more information via email: [e-mail]

[@tharunjavalimn]

What is the Onboard device? What is the Maximum Amp coming out of Onboard device? Do you have a link to it?

[@Foxtechhobby]

It's our mini 4K camera with 14x zoom range, here's the link www.foxtechfpv.com/fh314-4k-3-5x-optical-zoom-camera-with-3-axis-gimbal.html

[@tharunjavalimn]

@@Foxtechhobby I was not asking about camera or any gimbals. In your description you have mentioned there is converter which is onboard convert used to convert high voltage DC 400 to DC low voltage with some amps. I wanted to know any smps you have used or not?

[@Foxtechhobby]

Yes the onboard converter is the smps

[@tharunjavalimn]

@@Foxtechhobby Thanks. Do you sell these SMPS? Can you give the link to purchase?

[@Foxtechhobby]

@@tharunjavalimn No sorry we don't sell those separately

[@CreativeArtFilmss]

We can use helium balloon instead of this expansive useless dron ..

[@KefirTView]

$29,999.00 for this? Are you out of your mind? I'll pay you $60,000.00 for ONE, if you show me that in the history of this product just ONE has ever been sold. What a stupid idea to tether a drone.

[@chrisknight6884]

Actually there a number of application for a tethered drone. Similar devices have been trialled in Australia for bushfire monitoring. They can stay aloft for long periods, being tethered and therefore in a fixed location and altitude, they can be flown when other aircraft (such as water bombers) are in the vicinity. They can also lift radio antennas to an altitude providing coverage for emergency services in rugged terrain.
Still experimental, but of great potential.

[@Foxtechhobby]

there are many applications ,this 3500 w system can make a drone lifting up to 15kg payload and stay over 24 hrs in the air, think about emergency 4G network relay, signal relay and so , it worths more than its price.

[@killacovertops]

For industrial, Govt, life Safety etc. Yes this is actually useful. To your avg hobbyist may look boring but really impressive stuff tbh. Love seeing this tech growing.