First option inspect the area for any jammed paper, move carriage, check ink cartridge. Last option clean the Encoder strip. #HpdeskjetInk #Advantage3636 #E3error
Thank You !... I had a Paper Jam inside as my Error 3 Code... I only needed to see the way in :D Torx 10 was the proper fitting for mine, got in with a T9 tho.
For me it wasn't the cleaning of the strip that worked but realising that the carriage wasn't moving and the black ink cartridge that I'd just changed wasn't sitting correctly. I'd just cocked up in the way I had inserted the cartridge. Once I got the cartridge inserted correctly I just re-assembled the thing and it worked. i could have spent hours sorting out this error code. Thanks for pointing me in the right direction
Hi Cleaning did not help BUT I noticed the encoder strip had come out of the reader on the carriage. gently lifted it and placed it between the 3 plastic taps so it could read it again. closed up and worked perfectly ! thanks for heading me in the right direction (I'll pull out jammed paper more carefully in future)
salamat po sir sa tutorial nito natuto po ako kung panaano mag ayos ng hp susundin ko mga sinabi nyo rito sir lalo na linisin ang encoder strip tnx again
I have an HP deskjet 3700 printer. It has an E3 error. I have changed the ink cartridges; took it apart and looked for a paper jam; wiped the ribbon thing down; updated the drivers; unplugged it and plugged it back in. it still has the E3 error....
Hi, I have the same error on my hp deskjet 3750, when I turn on my printer i hear this noise "clak clak Chlack", after there is E3 error, I checked many times if there is paper inside , I checked cartridge, I move the carriage left to right, turn off reset. What can it be, do you have any solutions? Thank you
@@jaytechpinoychannel Thank you for responding so quickly. I already removed the carriage and put it back on and it can move normally, even when you turn on the printer it moves and when you do the reset it also moves. But the E3 error continues to appear. Thank you so much.
I have to same error. I opened the printer and found out that not only the encoder strip, but also another black longer strip below the encoder strip has broken in my printer. The other strip is opaque, black and sturdier. What is the name of that strip? It connects the two pulleys/wheels on the sides of the printer. It lies below the encoder strip. Can I buy it separately and replace the broken one? Can I buy the encoder strip and change the broken one. I need to change both. I don't know how both broke without doing anything at all. Please reply as soon as possible. Please help.🥲
are you talking about the belt? It seems difficult to find spare parts online, maybe you should go to printer repair shops, maybe you can buy second hand parts there, because I only use the parts for broken printers.
@@jaytechpinoychannel yes, I luckily came across another video on CZcams where they mentioned the name of the part I am talking about. It's most probably timing belt or something like that. Am I correct? Thank you for your fast reply.
if the encoder strip is removed from the position printer is detecting error, E3 error in the printer is general error sometime paper jam or carriage problem or they have foreign object inside printer
Good afternoon,excuse m, I did everything in the video and the same thing did not happen, it continúes to mark the same error, the cloth was dry or had some liquid
Hello boss yung amen po kase d sya kumakain ng papel di naman po paper jam gaya din po ng sainyo tsaka d po lumalabas yung puti na linya pag nag xexerox po
Maam linisin mo yung rubber nya sa likod yung sinasalpakan ng papel baka maalikabok lang yung rubber nya linisin nyo po ng brush, about linya po baka ink nya na po abg problema nag dry sya thanks 😊 for visiting.
yes po kug same problem check mo yung mga gear baka may foreign object sa loob baklasin yung sa printhead unit nya at manual paikutin ang mga gear forward reverse.
@@jaytechpinoychannel bakit sabi ng technician ko bawal punasan o linisin yung strips na yun? Kasi parang may marks ng mapa mapang brown yung strips ng hp ko. Sabi ko lilinisan ko, pero sabi nya hindi raw pwede linisan yun. Dapat daw palitan na. Kasi dapat nga raw yun medyo brown pa talaga kulay. Pag nagkulay transparent na, hindi na nababasa ng sensor. Kaya palitan nalang ng bagong strip ang solution nya.
@@hiteshshettyy try to open printer if you now how to disassembly and re assembly the printer must be check all drive gear inside maybe they have foreign object inside
Sir, ang problema po ng hp printer q,, ang daming naga blink, ung s ink alert, resume and information. Lahat sila naga blink, anu po dapat qng gawin. Sana po matulungan nyo aq
ang problema po nyan board or yung sa scanner motor nya di sya nag inizialize try mo po ulit off/on ang printer tignan mo yung scaaner nya kung gumagalaw tapos need po palitan ng motor scanner kung same problem parin board faulty na po sya.
@@aizabue5342 sira na motor nyan mahirap maghanap ng mabibilhan nyan ng spair parts kasi ginagawa ko kumukuha ako ng parts sa ibang mga sirang printer, sa mga printer shop baka maka bili ka nyan secondhand
Thus video is more annoying than a broken printer and leaves just as many mysterious unknowns in my mind. Thanks for making me decide to just go "office space" on this b****. Ahhhhhhhh starting to feel better already
I took my printer apart,but the problem did not want to go away.. There is.a.small opening with a small black rubber flap. Just underneath the flap I found a paper clip. 🤪 problem resolved
it worked , thanks a lot , i bought second hand printer (HP 4729) i was worried , but your solution worked!
It works! Thank you for saving me from frustration...
Thank You !... I had a Paper Jam inside as my Error 3 Code... I only needed to see the way in :D
Torx 10 was the proper fitting for mine, got in with a T9 tho.
For me it wasn't the cleaning of the strip that worked but realising that the carriage wasn't moving and the black ink cartridge that I'd just changed wasn't sitting correctly. I'd just cocked up in the way I had inserted the cartridge. Once I got the cartridge inserted correctly I just re-assembled the thing and it worked. i could have spent hours sorting out this error code. Thanks for pointing me in the right direction
Thanks sa mga tutorial mo boss marami akong natutunan at nagkaroon ako ng idea sa mga printer..
thanks for visiting
a lifesaver, or should I say a printer saver. I've tried every other useless advice on google, this was great. Thank you for this, it works now!
Hi Cleaning did not help BUT I noticed the encoder strip had come out of the reader on the carriage. gently lifted it and placed it between the 3 plastic taps so it could read it again. closed up and worked perfectly ! thanks for heading me in the right direction (I'll pull out jammed paper more carefully in future)
same problem.,can u send picture of correct position of encoder strip? thank you.
salamat po sir sa tutorial nito natuto po ako kung panaano mag ayos ng hp susundin ko mga sinabi nyo rito sir lalo na linisin ang encoder strip tnx again
Thank you
dapat po ba basang vbasahan ang panglinis?
This is helpful, nice sobrang galing mo boss mag fix
salamat
What type of screwdriver you use? Because mine cannot open using normal screwdriver.
How do you fix e3 error on hp printer. magaling ka talaga mag fix pla niyan
Iba na talaga ang marunong at magaling mag ayos ng printer, nakakainis kaya ung magpiprint ka tapos dimo napagana hehe
salamat sa pag bisita
This works, thank you.
THANK YOU SO MUCH! it works!
You're welcome!
Thank you a lot🙏
nice show thanks for this diy fixing printer.
Thanks for watching!
Ito yung problima ko sa printer ko Kuya.. I have hp printer.. New supporter here Kuya watching from Germany..
thanks
thanks for sharing this bro
Thank you!
Cool amazing keep it up doing well
Thank you, I will
iyan lang pala yong error e3 salamat po sa tutorial sir
ang galing nman po ang galing nyo mag ayos ganon pala yun thanks sa pashare
thank you
ang galing mo talaga mag fix
nakabalik na ulit kapuso..
fun thank you sa info..superdonesuperlike16..
Stay safe & God bless us all..!
salamat
wow brand new.
Thank you
galing po lodi nakkabilib talent mo.
thank you
Super!!
Thanks, it worked.
You're welcome!
Good job to fix your printer support
Yes, thanks
Very good video THX!!!! Very helpfull
Glad it helped!
@@jaytechpinoychannel you would have dropped your WhatsApp number
Is this works to HP 415 too?
Ang galing mo mag ayos jan brod.
thank you
Thanks
galing mo nman sir good job po sir
salamat
Super
Wow astig ang sound sir galing po
thank you
Ganda ng printer
Salamat sa pagturo lods kung paano maayos
thank you
ang galing naman
Nice bro..
Thank you so much 😀
salamat sa mga pa tutorial mo
welcome host
The video was quite helpful
Thank you
Is it applicable for Hp deskjet 2775 same E3 error. Please help
Ang gnda ng printer mo lodi. Saamin mumurahin lang hehe ika18Koments
salamat lodz
Ayun... Yung lang pala ang dapat gawin para magawa ng Tama. Kilangan lang ng tyaga sa pag aayus ng Makina.
thank you
Dito naman ako magstart ulit lodi.
thanks
Thank u for sharing kapatid may tips na ako paano mag gawa pag masea dahil mag tatayo ako printer shop ba Lang araw .
thank you
I have an HP deskjet 3700 printer. It has an E3 error. I have changed the ink cartridges; took it apart and looked for a paper jam; wiped the ribbon thing down; updated the drivers; unplugged it and plugged it back in. it still has the E3 error....
if error not disappear they have another problem mechanical not properly initialize or faulty board, you need to take him to the technician.
When i see your printer i want to have that one also .
iLove this music
salamat
Hi, I have the same error on my hp deskjet 3750, when I turn on my printer i hear this noise "clak clak Chlack", after there is E3 error, I checked many times if there is paper inside , I checked cartridge, I move the carriage left to right, turn off reset. What can it be, do you have any solutions? Thank you
Sir check the encoder strip plastic maybe not properly posistion in the sensor inside printhead.
Did it work? Mine is having the same exact problem
Tama yung encoder strip ang problema sakin, hindi naka-position nang tama. Tingin ako nang tingin kung may paper jam, wala naman. Haysss salamat.
I have the same problem… I followed step by step and reset … still have error
Sorry can I ask something alse .my printer hp2600 blinking all light.just WiFi only not blacking.the rest was blinking.so how is the solutions
if all light blinking maybe possible problem board faulty or power supply problem.
I already cleaned the econder strip and it doesn't work. Is there anything else I can do? Thanks so much.
check mechanical problem you can remove all carriage unit maybe they have foreign object .
@@jaytechpinoychannel
Thank you for responding so quickly.
I already removed the carriage and put it back on and it can move normally, even when you turn on the printer it moves and when you do the reset it also moves. But the E3 error continues to appear.
Thank you so much.
From which website ...I can buy a encoder strip of hp series?
thanks for visiting
What screw did you use to unscrew the parts?
star screw maam thanks for visiting
How to fix the blinking at ink button
My printer shows empty ink.. but the ink is new. It should be full.. why??. Help me pls
Maybe your ink problem you can try another ink for testing if same problem maybe printhead problem not detected ink cartridge, thanks for visiting 😊
AWESOME..
Thank you! Cheers!
I have to same error. I opened the printer and found out that not only the encoder strip, but also another black longer strip below the encoder strip has broken in my printer. The other strip is opaque, black and sturdier. What is the name of that strip? It connects the two pulleys/wheels on the sides of the printer. It lies below the encoder strip. Can I buy it separately and replace the broken one? Can I buy the encoder strip and change the broken one. I need to change both. I don't know how both broke without doing anything at all. Please reply as soon as possible. Please help.🥲
are you talking about the belt? It seems difficult to find spare parts online, maybe you should go to printer repair shops, maybe you can buy second hand parts there, because I only use the parts for broken printers.
@@jaytechpinoychannel yes, I luckily came across another video on CZcams where they mentioned the name of the part I am talking about. It's most probably timing belt or something like that. Am I correct? Thank you for your fast reply.
Pano po yung encoder strip eh wala ng kulay black parang na disattached na po sya. Papalitan na po ba yun?
need na po palitan yan lodz
How we know that the encoder strip is broken and should be replaced ?
if the encoder strip is removed from the position printer is detecting error, E3 error in the printer is general error sometime paper jam or carriage problem or they have foreign object inside printer
En que parte indica que soluciono el E3 no explica nada solo desarmo la tapa y listo
pudiste??
Buenas tardes disculpe hice todo lo del video y no pasó lo mismo me sigue marcando el mismo error el trapo estaba seco y tenía algún líquido
Good afternoon,excuse m, I did everything in the video and the same thing did not happen, it continúes to mark the same error, the cloth was dry or had some liquid
2nd option must be dis assembly the unit maybe mechanical problem
Nilinis ko na sir pero lumalabas parin ung e3
I did it all but it didn’t 𝓌𝑜𝓇𝓀 at all
Hello boss yung amen po kase d sya kumakain ng papel di naman po paper jam gaya din po ng sainyo tsaka d po lumalabas yung puti na linya pag nag xexerox po
Maam linisin mo yung rubber nya sa likod yung sinasalpakan ng papel baka maalikabok lang yung rubber nya linisin nyo po ng brush, about linya po baka ink nya na po abg problema nag dry sya thanks 😊 for visiting.
Where is the sensor? I cleaned the strip and the error continues.
if continues e3 problem you need to dis assembly check maybe they foreign object
right side drive gear unit.
Start here po.
Thanks 😊
hp deskjet f380. paper not feeding. error. d ko dn po alam hm magpagawa.
ipa check nyo nalang po sa printer shop malapit sa inyung lugar
A diyes ng Abril po magdamag po ulet tayo
Kuya ayaw pa din :( same error pa din po
Magkano po ang strips lang na yan?
di ko pa na try bumili nyan ang ginagamit ko yung mga use na or kapag naputol don sa dulo nya repair ko ginagamitan ko ng superglu
Problem still persists.....have the same model.printer
Try open remove all Check all gear maybe they have foreign object inside
Nilinisan mo lang yung encoder strip?
yes po kug same problem check mo yung mga gear baka may foreign object sa loob baklasin yung sa printhead unit nya at manual paikutin ang mga gear forward reverse.
@@jaytechpinoychannel bakit sabi ng technician ko bawal punasan o linisin yung strips na yun? Kasi parang may marks ng mapa mapang brown yung strips ng hp ko. Sabi ko lilinisan ko, pero sabi nya hindi raw pwede linisan yun. Dapat daw palitan na. Kasi dapat nga raw yun medyo brown pa talaga kulay. Pag nagkulay transparent na, hindi na nababasa ng sensor. Kaya palitan nalang ng bagong strip ang solution nya.
bro simulan ko dito mag paharang overnight, happy new year
Thanks bro
Hi i have a hp2700 printer and keeps giving me paper mismatch error. Will this help?
check paper size sitting in your computer
@@jaytechpinoychannel Hi, have tried everything, nothing seems to work.
@@hiteshshettyy try to copy print only not use computer then if copy print is working the printer theres no problem
@@jaytechpinoychannel Hi, copy print works but again it prints by shrinking it to A5 size.
@@hiteshshettyy try to open printer if you now how to disassembly and re assembly the printer must be check all drive gear inside maybe they have foreign object inside
3:10
bro cmulan koweekly paharang dito
thanks bro
All lights blinking.. only E is on display
salamat
Hiw to fix this problem.. help me
where I can buy that screwdriver and what was that name, Please：）
you can buy star screw T-10 any electronics shop or hardware available, thanks for visiting
@@jaytechpinoychannel thanks a lot
Tengo ese mismo error en la HP des jet Plus 41 52
i'm not understand
Talking might help
nextime thanks
I did the same now cadrige going too fast on the right side and stops at the right with l E3 ERROR IS SHOWN
you must clean properly the incoder strip maybe they have some grease and clean the sensor.
@@jaytechpinoychannel I cleaned it with baby wipes and it cleaned the black marking...so be careful while cleaning...
@@business2excel857 yes very good
Sir, ang problema po ng hp printer q,, ang daming naga blink, ung s ink alert, resume and information. Lahat sila naga blink, anu po dapat qng gawin. Sana po matulungan nyo aq
ang problema po nyan board or yung sa scanner motor nya di sya nag inizialize try mo po ulit off/on ang printer tignan mo yung scaaner nya kung gumagalaw tapos need po palitan ng motor scanner kung same problem parin board faulty na po sya.
@@jaytechpinoychannel triny qna po cya on and off tapos ung scanner indi po tlga gumagalaw,
Mga magkano po ang motor scanner, balak q nga po sana buksan kc sabi ng ibng napag tanungan q, baka may nabuhol lng s loob.
@@aizabue5342 sira na motor nyan mahirap maghanap ng mabibilhan nyan ng spair parts kasi ginagawa ko kumukuha ako ng parts sa ibang mga sirang printer, sa mga printer shop baka maka bili ka nyan secondhand
@@aizabue5342 need talaga buksan yan
That fu--ing music cant you speek ?
Thus video is more annoying than a broken printer and leaves just as many mysterious unknowns in my mind. Thanks for making me decide to just go "office space" on this b****. Ahhhhhhhh starting to feel better already
I took my printer apart,but the problem did not want to go away..
There is.a.small opening with a small black rubber flap. Just underneath the flap I found a paper clip. 🤪 problem resolved
Worst printer ever. Don't buy HP Envy 6400.
I just want to smash this piece of junk printer to bits (: It makes me very very angry (: