Thanks very much for sharing this wealth of knowledge and experience. You just saved me a lot of time trying to build a burner that is this efficient! Thank you!
You sir, have made skills ! I know because I am a Auto/Truck body man with 45yrs in the business. Im researching a waste oil heater to build for my Shop to use (as I restore my next car, a 68 Dodge SuperBee..) Your W. O. Heater is my favorite ! Keep on Fabricating my friend , your the best
Ahoj Oto, v prvé řadě díky za perfektní návod, jak postavit olejová kamna s nuceným vháněním vzduchu. Už dlouho jsem nad těmito přemýšlel, naše atmosferické jsou totiž závislé na dobrém tahu komína, což je v hluboce zaříznutém údolí docela problém. Kamna jsme dle Tvého návodu postavili, hoří pěkně, nekouří, ovšem mají malý výkon. Použili jsme silnostěnou rouru výšky 1,2m a průměru 360mm. Díry v jeklu 60x60 4mm, výška ode dna 120mm , ventilátor ze Škody 1000MB. Máš naprostou pravdu (jak jsem se dočetl v diskusi), že na množství oleje v kamnech v podstatě nezáleží. Máme tedy slabý ventilátor? Opravdu udělá větší množství vháněného vzduchu velkou změnu výkonu? Apropo, regulace otáček je super, to mě ale ještě čeká. Díky moc za odpověď. Vašek
Odpovím si sám: ano, výkon ventilátoru (množství vháněného vzduchu) v podstatě rozhoduje o výkonu kamen. Máme čtyři rychlosti ventilátoru, což bohatě stačí a kamna jedou ke vší spokojenosti. Nejlepší je, že jim nevadí ani 7m dlouhý, takřka vodorovný, kouřovod. Kamna nehouří, z komínu jde pouze horký vzduch. Čistit je stačí cca jednou za 30h. provozu, nicméně skoro nic k čištění v nich stejně není.
Hello! Very nicely built, both the burner and the add-on ventilation fins. I would make one suggestion: put in additional ducting to bring fresh air from the outside instead of using the air that is already in the workshop.
THANK YOU FOR THIS VIDEO! I SAW THE FLAME PATTERNS YEARS AGO AND COULD NOT UNDERSTAND HOW IT WORKED. THANK YOU FOR THE MEASUREMENTS OF THIS GREAT DESIGN! I AM SO HAPPY TO HAVE FOUND THIS, AM BUILDING IT NOW! MERRY CHRISTMAS, MAY GOD BLESS YOU AND KEEP YOU!
I really like the setup you've got. I like the sheets on the sides of the burn chamber. You make things with very high quality, too. I got the exact same Speedglas too by the way. lol. And you got Pink Floyd on.😍
Have you any drawings done for this this yet I would be very interested just about to start making a new one but yours is the best by far I've seen , great build. Regards Alan.
Very well done sir. Thanks for the measurements on the combustion air tube, I think that really makes the difference. I hope you don't mind if I copy your design. The heat exchanger rings are great also! It's all just wonderful. Thank You.
I would like to see more detail on your oil feed. You have done an excellent job on the rest of the video. A true craftsman. Your work is top notch. I believe you have a very efficient and effective furnace. I would be proud to build one like it for my shop.
Yea, I would like to see that too. The way it looks, the oil must come up from the bottom, but maybe not. Most use a pan of some sort, but this appears to go right into the bottom of the cylinder. Not sure, but that flame is awesome. All I need is 2k more in tools and I can use my "free" oil, lol. I do want to make something, but unfortunately it won't be as slick as that.
yes robert i paid enough attention to that minute 2:04 you can see the communicating feed tube, and at minute 5:55 it is clearly just one hole at the bottom, so it is not a drip feed system, it is simple yet effective, the dripping is done elsewhere outside the burning chamber maybe at the side hanging square vessel
Ota, this is probably the cleanest burning waste oil stove I've seen. Very well engineered! If you don't mind I think I might try to recreate this to replace my current waste oil burner.
Thanks. A seen your oil burner too and they has low consumption-performance ratio. So, feel free with getting inspiration. Mine can heat a my workshop (180 square meters) from 9°c to 25°c in 90 minutes upon consumption 2,5 L. Good luck.
Hi Ota. Great burner. I'm going to copy this design. Only question is about blowers. You indicate 2 car blowers of 3-speed design. Are they run full blast all the time or do you mix settings on each fan depending on how much heat you need for your shop?
zdravim... nerozmyslali ste aj nad teplovodnym riesenim? aby sa ohrievala voda? colovu medenu ruru v tvare slimka (sneku). vyriesit automaticke zapalovanie a mate hovotu pec :) zapalovanie by som vyriesil eletrickou teplovzdushou pistolou.
I would have to say that this heater you have built would have to be the most impressive design and function I have seen, and it is so neat. You need to be congratulated my friend. Excellent work. If you don't mind me asking what size square tube is used in the burner and what temperature does it get to . Thank you and be proud!! 👌👍
Hi ! I have watching all your video and all I can say , your burner is one of the best build which I have seen. I'll start to draw the sketch for my future burner, but I have a lot of questions about of your design. I want to use also a butan gas recipient. Well done !
I guess I'm lost as to how you're feeding the oil. I understand your heated air instruction which is genius. I couldn't see where you fed the oil though. I see the tank feeding a small box and that's it. Help would be appreciated
Really awesome setup! Two questions: 1.) Where did you get the variable speed dual blower setup? and what is the CFM? 2.) How warm does this get your garage?
hi Ota: I have been searching for a design to make a boiler to heat an orphanage in third world and yours is the cleanest burn I have seen.I cant figure out from your video how you install and control the oil feed? Is the bottom of the burn can flooded with oil to a certain depth? Thank you for the video. Its A BEAUTIFUL THING.
As far as i can tell the pipe down the middle does nothing but force air into the chamber. The oil level in the bottom of the drum is controlled via nozzle or valve. Only way to control the flow is turn it up or down. You know how much you need by watching it for a while.
you sir, are a genius!! and I give you a lot of respect! your design looks great, and looks to be more effective. I have one question, the square tube that goes into the tank and sits at the bottom, how far off the bottom does that tube sit?
hi ota that is the best build of a waste oil burner i have seen excellent work, i just built same for my workshop not as neat as yours but it works fantastic heat which you can control ,i am still fine tuning the base of your burner inside seems to be flat and on outside is domed,did you weld a flat base inside ,also i have a riello blower on mine do i need a bigger blower thanks if you can let me know,yours is the best i have seen well done
Oil comes on the bottom of the chamber, when heated up it evaporates and doesn't burn until comes in to contact with a fresh supply of air, that's why you can see it burns like it works on gas.
I've built one as close to what he has here straight waste motor oil... the hotter mine gets the more blue I see but do have some orange color in it... Clean without smoke
ten radiator má byť zvyslo a nie vodorovne na zvýšenie účinnosti :) A rozhodne nie len pribodovaný, ale navarený po celej dotykovej ploche. Inak super robotka :)
Vodorovné žebrování je z důvodu nuceného proudění vzduchu a není nabodované, ale přivařené v místě největšího tepla, které vychází z hořáku aby se mohl materiál roztahovat a nebortil se výměník. Teplota přefukovaného vzduchu je kolem 90°C a teplota na výměníku a žebrování se pohybuje 450-550°C v závislosti na kvalitě paliva. Proto mám nucené proudění vzduchu.
The oil pools in the bottom, the high temperature inside vaporizes it and the gases mix with the air that comes through the holes in the square section pipe where it burns. The fact that the air injection holes are on the corners makes the air rotate as it hits the walls making a nice cyclone which improves flow and mixing for an efficient combustion
Dobrý den. Použil jsem váš nápad a okopíroval ho, jenže výsledek hoření není tak skvělý jak u vás. Kamna zapalím a po rozhoření v nich olej prská a intenzita plamene hrozně kolísá, zkouším upravovat výkon ventilátoru, ale vždy se mi olej zahasí. Prosím o radu, co dělám blbě. Díky PS: dno kamen je rovné, olej přitéká ze spod jak u vás a jekl s dírkami mám 10cm ode dna.
Dobrý den mohu se zeptat z čeho mate to tělo toho kotle , to je z nějakého vzdušníku/zasovníku vzduchu děkuji .. a jekl na hořak na vedení vzduchu je 40x40 mm?
very nice I would build but I miss that part of the waste oil power goes directly into, and then the distance air diffuser which is stationed between the bottom and the speaker? thank you
Very nice burner. I've watched this video many times looking for details so I can copy it. A few things I need your response to please. 1- How deep do you keep the oil level in the bottom of the burner ? 2- How high above the oil in the bottom of the burner is the horizantal part of square metal combustion air tubing (distance between top of oil and bottom of the horizantal square tubing) ? 3- What is the overall hight of the unit ? 4 - What all does the electronic box do ? 5 - What kind of oil are you burning ? 6 - What is the diameter of the main burner tube ? Thanks for your help with these details.
great burner the best i have seen on youtube respekt ! ---- i am also need to copy your burner i have the same questions. ---- i have build an burner on your example bit he works not really good on wmo. I have includet a elektrical heter coil from a washing mashine to start the flames ;) thats electrician like :D My air blowers are to fast or to slow.... a lot of engeniring do have in your burner that is alsome !!! I hope you answer us the questions best regards Alex
Hello... 1. At the begining i´ve got more oil, about 2 liters. Let it burn. There is no usual oil level. 2. Depends on oil level 12-6 cm above oil. 3. 95cm 4. Downscaling 230V AC - 12V DC cause of airfan. 5.Doesn´t matter... Used motor oil, frying oil 6. 280mm (11") Good luck!
Zdravím Oto. Super hořák. Dnes jsem dokončil výrobu podobného podle tvé předlohy, ale výsledky nemám stejné jako ty. Mohl bys mi prosím tě upřesnit nějaké detaily, jako je výška hladiny oleje, výška vzduchovodu nad hladinou a jestli všechny dírky musí být opravdu 3,8mm. Budu Ti velmi vděčný za každou informaci. P.S. Myslíš že by to mohlo fungovat, kdyby to mělo dvojplášť a byla by v něm voda?
Zdar BOBO co se týče hladiny oleje mě to hoří při 1cm ,až 4cm úplně stejně strašně záleží na teplotě oleje ,aby se mohl dobře odpařovat . Hořák mám kolem 12cm nad dnem .Dírky v hořáku mohou být třeba4mm je to odzkoušeno i na jiných kamnech .A pokud jde o dvojplášť tak nech spodek jako výparník zhruba 15 až 20 cm aby si zajistil zplynováni oleje . Každopádně to funguje samozřejmostí je pojištovák tlaku čerpadlo atd.jo a taky dobře svářet .mnoho zdaru a pošli video zdraví Ota.
Amazing how much clean the burn is? Your work Sr is really a piece of art. I'd like to replicate your artwork in a smaller home-size stove, what things i have to consider? as you are an expert? any help is appreciated.
Try to avoid electricity outage for the fan. There are a lots of explosive gases. That can be solved with some kind of backup batteries. Feel free with any other questions. :)
Thank you for your response, actually you encouraged me to do this work, hence my (1/3) salary goes for warming home!. since morning I've been looking for a drum with the same size(280mm) , can't find. In order to resize you artwork To fit my home needs:: May you please provide me with a handy sketch illustrating: 1- The dimensions of the hall project including square T tube. 2- joined vessel and the evaporate process. Thanx in advance. amayruee[AT]gmail[dot]com.
the oil pipe that install in the bottom of combustion chamber does it install directly in the center and flood the bottom with oil? or is it contained in a smaller ring
multumesc ! cam atat am apreciat si eu. aveam doar nevoie de o confirmare. pot sa spun ca este un design bun care functioneaza foarte bine ; consumul de combustibil in raport cu performantele este ok. eu am undeva in jur de 2 - 2.5 l/h pentru a obtine 15 grade celsius intr-o hala din tabla neizolata termic cu suprafata de 50mp si inaltime de 4.5m, la -10 - 8 grade afara.
One of the nicest burners I've seen on youtube. Well executed build and clean running.
Thank a lot. Feel free with any questions. :)
Stay tuned for my next video, where i will explain some of that electric stuff.
czcams.com/video/Yqr2BDrWpyk/video.html Nesouhlasím. Tam jsou lepší kteří pracují roky a krutý chlad.
excellent job! the flame looks perfect, thank you for sharing your creation with us.
I've built one as close as I could to yours and it work great... not as blue but very clean.... Thank you sir for what you've shown here!!!
Great heater, love the new additions they will really improve performance.
Excelente!!! Sin dudas lo más sofisticado que he visto !!! Gracias por compartirlo!!!
Díky za inspiraci, postavili jsme kotel s velice podobným designem a funguje skvěle!!
Nemáte zač proto jsem to popsal snad dost .přeji málo výpadku proudu anebo záložní zdroj kutilům ZDAR.
Thanks very much for sharing this wealth of knowledge and experience. You just saved me a lot of time trying to build a burner that is this efficient! Thank you!
Работа профессиональная,отличная идея теплообмена,давно искал именно это ,супер
You sir, have made skills ! I know because I am a Auto/Truck body man with 45yrs in the business. Im researching a waste oil heater to build for my Shop to use (as I restore my next car, a 68 Dodge SuperBee..)
Your W. O. Heater is my favorite !
Keep on Fabricating my friend , your the best
awesome build Ota. thanks.!
Ahoj Oto, v prvé řadě díky za perfektní návod, jak postavit olejová kamna s nuceným vháněním vzduchu. Už dlouho jsem nad těmito přemýšlel, naše atmosferické jsou totiž závislé na dobrém tahu komína, což je v hluboce zaříznutém údolí docela problém. Kamna jsme dle Tvého návodu postavili, hoří pěkně, nekouří, ovšem mají malý výkon. Použili jsme silnostěnou rouru výšky 1,2m a průměru 360mm. Díry v jeklu 60x60 4mm, výška ode dna 120mm , ventilátor ze Škody 1000MB. Máš naprostou pravdu (jak jsem se dočetl v diskusi), že na množství oleje v kamnech v podstatě nezáleží. Máme tedy slabý ventilátor? Opravdu udělá větší množství vháněného vzduchu velkou změnu výkonu? Apropo, regulace otáček je super, to mě ale ještě čeká. Díky moc za odpověď. Vašek
Odpovím si sám: ano, výkon ventilátoru (množství vháněného vzduchu) v podstatě rozhoduje o výkonu kamen. Máme čtyři rychlosti ventilátoru, což bohatě stačí a kamna jedou ke vší spokojenosti. Nejlepší je, že jim nevadí ani 7m dlouhý, takřka vodorovný, kouřovod. Kamna nehouří, z komínu jde pouze horký vzduch. Čistit je stačí cca jednou za 30h. provozu, nicméně skoro nic k čištění v nich stejně není.
Absolutely one of best on youtube .
Thanks. I hope i will upload another video about oil burners.
Wow! fabulous design and thank you so much for sharing your knowledge. What's left to be said? You're gifted.
I have looked at hundreds of videos of oilburners and this beatiful design is the one I will copy.
Good luck :)
you this is the best design i have seen yet
Hello! Very nicely built, both the burner and the add-on ventilation fins. I would make one suggestion: put in additional ducting to bring fresh air from the outside instead of using the air that is already in the workshop.
Great build!
thats awesome. lets see how its built. very good job
Expertly done. Good job and didn't waste time on long explanations
pěkně vyrobený kotílek :) taky se chystám na takový :)
Great job that looks amazing.
Thanks, I appreciate it.
I would also like more details on your oil feed. Great work best waste oil burner I've seen so far.
Zdravím, to je krásná práce :)
Well just like that the man makes magic ...well done maybe 1% of youtubers could make that ..
THANK YOU FOR THIS VIDEO! I SAW THE FLAME PATTERNS YEARS AGO AND COULD NOT UNDERSTAND HOW IT WORKED. THANK YOU FOR THE MEASUREMENTS OF THIS GREAT DESIGN! I AM SO HAPPY TO HAVE FOUND THIS, AM BUILDING IT NOW! MERRY CHRISTMAS, MAY GOD BLESS YOU AND KEEP YOU!
Thank a lot. For me is reward just that somebody is able to make it himself. Good luck :)
I really like the setup you've got. I like the sheets on the sides of the burn chamber. You make things with very high quality, too. I got the exact same Speedglas too by the way. lol. And you got Pink Floyd on.😍
Thanks for your opinion. I am glad you like it. I have my Speedglas abot 10yrs. Speedglas is the n.1. 😍
Have you any drawings done for this this yet I would be very interested just about to start making a new one but yours is the best by far I've seen , great build.
Regards Alan.
Beautiful work
Very well done sir. Thanks for the measurements on the combustion air tube, I think that really makes the difference. I hope you don't mind if I copy your design. The heat exchanger rings are great also! It's all just wonderful. Thank You.
I would like to see more detail on your oil feed. You have done an excellent job on the rest of the video. A true craftsman. Your work is top notch. I believe you have a very efficient and effective furnace. I would be proud to build one like it for my shop.
I am going to show it in next video. That hopeluflly will come soon. :)
what kind of fan or blower did u use?
Yea, I would like to see that too. The way it looks, the oil must come up from the bottom, but maybe not. Most use a pan of some sort, but this appears to go right into the bottom of the cylinder. Not sure, but that flame is awesome. All I need is 2k more in tools and I can use my "free" oil, lol. I do want to make something, but unfortunately it won't be as slick as that.
Yes keep us updated want to build one of these some day
yes robert i paid enough attention to that minute 2:04 you can see the communicating feed tube, and at minute 5:55 it is clearly just one hole at the bottom, so it is not a drip feed system, it is simple yet effective, the dripping is done elsewhere outside the burning chamber maybe at the side hanging square vessel
Красивая работа!
gran trabajo!!!! felicitaciones!!! una consulta, hay peligro de explosion? gracias
impressive burn quality.
You got fast hands, brother 👌
Ota, this is probably the cleanest burning waste oil stove I've seen. Very well engineered! If you don't mind I think I might try to recreate this to replace my current waste oil burner.
Thanks. A seen your oil burner too and they has low consumption-performance ratio. So, feel free with getting inspiration. Mine can heat a my workshop (180 square meters) from 9°c to 25°c in 90 minutes upon consumption 2,5 L. Good luck.
awesome build , i never new you could get waste oil to burn blue
Why not? Fuel is fuel. You just need to find the right AFR.
Very well built and practical setup. The finning would make it quire efficient as far as these things go.
Wonder what it's output is?
What output? Have you thought about the remains or the resulting temperature?
Pre-heating the combustion air - excellent!
True Mastery!
Hi Ota. Great burner. I'm going to copy this design. Only question is about blowers. You indicate 2 car blowers of 3-speed design. Are they run full blast all the time or do you mix settings on each fan depending on how much heat you need for your shop?
Молодец! Супер!
Thank you so much for sharing
That stove is a masterpiece
Awesome stove
Supr.100% eko vytápění....
Great video...!
Thanks for sharing your talent...!
zdravim... nerozmyslali ste aj nad teplovodnym riesenim? aby sa ohrievala voda? colovu medenu ruru v tvare slimka (sneku). vyriesit automaticke zapalovanie a mate hovotu pec :) zapalovanie by som vyriesil eletrickou teplovzdushou pistolou.
Hi, very nice build burner, also burns very clean. I was just wondering where the oil gets injected?
Would it be possible to get a copy of those sketches?
Excellent work by the way.
great video thanks
I would have to say that this heater you have built would have to be the most impressive design and function I have seen, and it is so neat. You need to be congratulated my friend. Excellent work. If you don't mind me asking what size square tube is used in the burner and what temperature does it get to . Thank you and be proud!! 👌👍
Hi ! I have watching all your video and all I can say , your burner is one of the best build which I have seen. I'll start to draw the sketch for my future burner, but I have a lot of questions about of your design. I want to use also a butan gas recipient. Well done !
Thanks for your support. I wish you luck in your build. My burner is made out of old car(LPG) gas recipient.
Excelente trabalho e produto.s.p.brazil.
Great job, can you tell me how much oil you spend an hour?
I guess I'm lost as to how you're feeding the oil. I understand your heated air instruction which is genius. I couldn't see where you fed the oil though. I see the tank feeding a small box and that's it.
Help would be appreciated
Really awesome setup!
Two questions:
1.) Where did you get the variable speed dual blower setup? and what is the CFM?
2.) How warm does this get your garage?
Very good iron worker
hi Ota: I have been searching for a design to make a boiler to heat an orphanage in third world and yours is the cleanest burn I have seen.I cant figure out from your video how you install and control the oil feed? Is the bottom of the burn can flooded with oil to a certain depth?
Thank you for the video. Its A BEAUTIFUL THING.
Beautiful build !!! Yes please I have same question as Gary B ??
As far as i can tell the pipe down the middle does nothing but force air into the chamber. The oil level in the bottom of the drum is controlled via nozzle or valve. Only way to control the flow is turn it up or down. You know how much you need by watching it for a while.
Excellent craftsmanship do you have any videos on how you built this originally ?
There are 2 other videos on my channel, that could help you. :)
you sir, are a genius!! and I give you a lot of respect! your design looks great, and looks to be more effective. I have one question, the square tube that goes into the tank and sits at the bottom, how far off the bottom does that tube sit?
It´s about 120mm.
hi ota that is the best build of a waste oil burner i have seen excellent work, i just built same for my workshop not as neat as yours but it works fantastic heat which you can control ,i am still fine tuning the base of your burner inside seems to be flat and on outside is domed,did you weld a flat base inside ,also i have a riello blower on mine do i need a bigger blower thanks if you can let me know,yours is the best i have seen well done
Zdravim vas moc hezke video,jen se chci zeptat kolik to ma spotrebu oleje pri max a pri min.vykonu? A prosim,kolik ty kamna maji vykon v kw?
That is very nice! how does it feed oil into the combustion chamber?
Melvin Gunter I would be interested to know this also.
Feeding works on principe joined vessels and it works by evaporation of oil steam.
Check my others 2 videos....Hope they help you. :)
Oil comes on the bottom of the chamber, when heated up it evaporates and doesn't burn until comes in to contact with a fresh supply of air, that's why you can see it burns like it works on gas.
great build! does the flame always remain blue? or does it turn orange once lighting fluid is gone and just burning oil? motor oil?
I've built one as close to what he has here straight waste motor oil... the hotter mine gets the more blue I see but do have some orange color in it... Clean without smoke
Nice job
Zdravíčko Vedúci. Jakú farbu ste použili? Klasickú na výfuky? Cca 700°C? Vydrží? Ďakujem.
Крутая печка получилась
So perfect work!
สวัสดีครับ ผมชมจากประเทศไทยครับ
ขอชื่นชมผลงานของคุณว่าสุดยอดมาก
ผมมีคำถามครับว่า ในขั้นตอนการเริ่มจุดไฟ คุณได้ใส่เชื้อเพลิงอย่างอื่นด้วยหรือเปล่า เช่น เศษผ้า หรือเศษฟืนเล็กๆ
ขอบคุณครับ
This video was riveting.
ten radiator má byť zvyslo a nie vodorovne na zvýšenie účinnosti :) A rozhodne nie len pribodovaný, ale navarený po celej dotykovej ploche. Inak super robotka :)
s tým ventilátorom na konci voorovný radiator dáva zmysel, ale ako som písal hustejšie a nie len bodovať, ale kompletne privariť.
Vodorovné žebrování je z důvodu nuceného proudění vzduchu a není nabodované, ale přivařené v místě největšího tepla, které vychází z hořáku aby se mohl materiál roztahovat a nebortil se výměník. Teplota přefukovaného vzduchu je kolem 90°C a teplota na výměníku a žebrování se pohybuje 450-550°C v závislosti na kvalitě paliva. Proto mám nucené proudění vzduchu.
Yes could you please tell us what the black electric box is that you hang on the side ?
But where is the oil feed ?
Injected in the air feed? Where and how? Is there a nozle of some kind?
Great craftmenship , well done!
The oil pools in the bottom, the high temperature inside vaporizes it and the gases mix with the air that comes through the holes in the square section pipe where it burns. The fact that the air injection holes are on the corners makes the air rotate as it hits the walls making a nice cyclone which improves flow and mixing for an efficient combustion
Dobrý den. Použil jsem váš nápad a okopíroval ho, jenže výsledek hoření není tak skvělý jak u vás. Kamna zapalím a po rozhoření v nich olej prská a intenzita plamene hrozně kolísá, zkouším upravovat výkon ventilátoru, ale vždy se mi olej zahasí. Prosím o radu, co dělám blbě. Díky
PS: dno kamen je rovné, olej přitéká ze spod jak u vás a jekl s dírkami mám 10cm ode dna.
Dobrý den mohu se zeptat z čeho mate to tělo toho kotle , to je z nějakého vzdušníku/zasovníku vzduchu děkuji .. a jekl na hořak na vedení vzduchu je 40x40 mm?
mužů se zeptat jaký mate průměr kotle a komínu? děkuji.(stavim kotel podle Vas.)
Kotel je ze staré nádrže na LPG ø280mm a od kouření je nerez ø130mm. Přeji mnoho úspěchu. :)
dekuji
very nice I would build but I miss that part of the waste oil power goes directly into, and then the distance air diffuser which is stationed between the bottom and the speaker? thank you
czcams.com/video/uf1IVV_TJP8/video.html Yirmi beş yıl boyunca sıcak olmaya yardım ediyorum.
awesome system, can you provide plans in detail, cost?
the dr.who tank look of the aliens.great build.
Nice , how much oil does it burn per hour?
1 - 2L depends on adjustible performance. And quality of the oil.
Very nice burner. I've watched this video many times looking for details so I can copy it. A few things I need your response to please. 1- How deep do you keep the oil level in the bottom of the burner ? 2- How high above the oil in the bottom of the burner is the horizantal part of square metal combustion air tubing (distance between top of oil and bottom of the horizantal square tubing) ? 3- What is the overall hight of the unit ? 4 - What all does the electronic box do ? 5 - What kind of oil are you burning ? 6 - What is the diameter of the main burner tube ? Thanks for your help with these details.
great burner the best i have seen on youtube respekt !
---- i am also need to copy your burner i have the same questions.
---- i have build an burner on your example bit he works not really good on wmo. I have includet a elektrical heter coil from a washing mashine to start the flames ;) thats electrician like :D
My air blowers are to fast or to slow.... a lot of engeniring do have in your burner that is alsome !!!
I hope you answer us the questions best regards Alex
Hello... 1. At the begining i´ve got more oil, about 2 liters. Let it burn. There is no usual oil level.
2. Depends on oil level 12-6 cm above oil.
3. 95cm
4. Downscaling 230V AC - 12V DC cause of airfan.
5.Doesn´t matter... Used motor oil, frying oil
6. 280mm (11")
Good luck!
Zdravim Vas.Pekna praca.Chcel by som sa opytat asi aku to ma spotrebu oleja za jeden den priblizne na min az strednom vykone...cca?
Na min cca 1l -hod na max což používám nejvíce 1.5- až 2l -hod hodně záleží na hustotě,pochopitelně čím řidší tím vyšší spotřeba,ale i vyšší teplota.
dakujem ...slape to neskutocne dobre
Very nice,,I also would like to know more about your feed
Zdravím Oto.
Super hořák. Dnes jsem dokončil výrobu podobného podle tvé předlohy, ale výsledky nemám stejné jako ty. Mohl bys mi prosím tě upřesnit nějaké detaily, jako je výška hladiny oleje, výška vzduchovodu nad hladinou a jestli všechny dírky musí být opravdu 3,8mm.
Budu Ti velmi vděčný za každou informaci.
P.S. Myslíš že by to mohlo fungovat, kdyby to mělo dvojplášť a byla by v něm voda?
Zdar BOBO co se týče hladiny oleje mě to hoří při 1cm ,až 4cm úplně stejně strašně záleží na teplotě oleje ,aby se mohl dobře odpařovat . Hořák mám kolem 12cm nad dnem .Dírky v hořáku mohou být třeba4mm je to odzkoušeno i na jiných kamnech .A pokud jde o dvojplášť tak nech spodek jako výparník zhruba 15 až 20 cm aby si zajistil zplynováni oleje . Každopádně to funguje samozřejmostí je pojištovák tlaku čerpadlo atd.jo a taky dobře svářet .mnoho zdaru a pošli video zdraví Ota.
BOBO BOBO Tak už jsem na svůj kanál dal video.
Amazing how much clean the burn is? Your work Sr is really a piece of art. I'd like to replicate your artwork in a smaller home-size stove, what things i have to consider? as you are an expert? any help is appreciated.
Try to avoid electricity outage for the fan. There are a lots of explosive gases. That can be solved with some kind of backup batteries. Feel free with any other questions. :)
Thank you for your response, actually you encouraged me to do this work, hence my (1/3) salary goes for warming home!.
since morning I've been looking for a drum with the same size(280mm) , can't find.
In order to resize you artwork To fit my home needs::
May you please provide me with a handy sketch illustrating:
1- The dimensions of the hall project including square T tube.
2- joined vessel and the evaporate process.
Thanx in advance.
amayruee[AT]gmail[dot]com.
I am going to send you the sketches this week. First i must draw them.
Thanks a lot.
How often do you have to clean out the burn chamber?
It depends on purity of oil. Usually after 10l (3days). Just scraper and vacuum cleaner. :)
Hello, is this burner for in house use, is it safe?
Hello, what type of blower is it, which flow of air approximately?
2 turbine car windshield blower. Doesn´t matter. 2 or 3 speed inneeded.
Здравствуйте! Какой расход масла у ваше печи?
Fancy!
How do you clean the carbon build up out of the bottom of it??
What is the name of the blower motor?
Для общего развития ,как масло подается?
the oil pipe that install in the bottom of combustion chamber does it install directly in the center and flood the bottom with oil? or is it contained in a smaller ring
Right in the center of bottom.
10.4! your rig is awesome! Thank you for taking your time to help! Mel
bravo good
hej
Jak wysoko jest umieszczony nadmuch nad paleniskiem ?
GG
GG. NEROZUMÍM otázce.
좋아요 --- 꾹 ---------- ^^
Prosim o prumer tubicky na olej a jaky je spad trubicky do kamen dekuji
hello, can you please tell me what is the distance from the bottom of the stove to the T pipe. thank you
Ciuperca Florin 10 cm florine
multumesc ! cam atat am apreciat si eu. aveam doar nevoie de o confirmare. pot sa spun ca este un design bun care functioneaza foarte bine ; consumul de combustibil in raport cu performantele este ok. eu am undeva in jur de 2 - 2.5 l/h pentru a obtine 15 grade celsius intr-o hala din tabla neizolata termic cu suprafata de 50mp si inaltime de 4.5m, la -10 - 8 grade afara.
Do you have a drawing of this stove?