Hi from France I can't magine the time spent to restore, maintain and clean these super nice tractors. All the best for you, may your Ford continue to mow and harvest grass for many years.
Class video some lovely kit there, just love the 8210 when the puff of smoke when she get the drive on. just shows this kit is very capable of doing the job. nice one Brian
Just found your vid and what a great one it is, brings back so many memories of watching this when I was a young lad in the 80s. Those fords are a credit to you and being a ford owner myself, nothing better than seeing them working 👍
I think the ten-x was the best flywheel chopper off them all. I ran 1 for 12 years doing around 800 to 1000 acres a year never had any problems with it and we had a tm 155 on it and a ts 135 and she could handle them no problem. Fantastic video brings back lots of memories.
Lovely tractors, all of them, better than new in some aspects, the later 10 series were the best tractors built before the plastic took over. Its nice to see someone with a passion to keep them in excellent order, great video shots, thanks for making them available.
Brilliant video. We used 10 series for years with a tarrup double chop. We then mowed in front of the tarrup with an 8ft mower. We then got a jf900 which was a big step forward. We added a few tractors over the years which are all fords. 8210 turbo and 8630 powershift. Both drove the jf. The 8630 was a dream to use with the powershift at lifting grass. Theres also a 8830 Dual Power!(extremely rare dual power model) which we used on an kvernland centre pivot 10ft mower for a season or two. We pulled behind mostly but if we side filled we did it to the right. Its so much handier and more natural and easier on the neck. We changed the trailers to suit. I think we were lifting 18ft rows. 9:449:44
That's the best silage video this year i remember many summers in the early 90 drawing with 7610 and 7810 silage was good craic back then 50acres a day would be a great day now its just to fast and to much pressure and money invested
Did you have these resprayed by someone you'd recommend? I have a 8210 out of Spain on the farm that is completely rust free but in dire need of being stripped and re-sprayed to keep it that way! Located just east of Belfast
ROADEO CURVE 1200 16.8 cubic metre grain capacity 29.5 cubic metre silage capacity 5.50m (18ft) long body Sprung drawbar 10 stud Commercial axles with 420x180mm brakes 100mm wide multi leaf axle spring set Hydraulic tailgate LED lights High tensile steel body for a lower nett weight
@@millarcontracts thanks for replying I has a feeling you would as have read the other comments that you also replied to, nice to get a reply,, so what's your opinion on the idea of running the 7710 on the chopper and seeing the difference in performance in comparison to the 8210, have you done this already?
The 8210 would be rated at 115hp from the 6.6lt the 7710 would be 97hp from the 4.4lt Them extra 2 pots would make a difference Have a look at my video from 2 years ago we had the 7000 on the 10x it was going every bit as well as the 8210
@@millarcontracts ah brilliant I will have a watch of the 7000, they were a 4.2 🔥,,, yea the extra 2 cylinders definitely help in comparison to a smaller 4 pot with a turbo
@@millarcontractsThe 7710 and 7610 are 103 HP in the Gen 1 & 2.. The Gen 3 were upped to 105 HP. The 7600 and 7700 had 97 HP but the PowerPlus models on the end off their production run upped them to 103 HP which was basicly the crossover engine to the 10 Series...
Interesting, not one of these tractors would have been sold new in 2023, yet you expect us to accept that it's a 2023 video, when did ford get rebranded to New holland! thanks for sharing
Thanks for your comment this is a very armature video made by myself with a drone and my everyday phone just not that far advanced yet.... there is sound of the machines near the end of the video
I don't think you'll see a better setup in 2023 anywhere. SQ are the best looking series. Unreal.
Great setup 👌
Fabulous set up brilliant tractors 👍
Super video and superb kit, credit to the owners, wish I had a shed like that where the tractors and machines just keep coming!!
Hi from France
I can't magine the time spent to restore, maintain and clean these super nice tractors.
All the best for you, may your Ford continue to mow and harvest grass for many years.
Tractors and Machine’s are a credit to there owners. Excellent video also. 👍👍
Class video some lovely kit there, just love the 8210 when the puff of smoke when she get the drive on. just shows this kit is very capable of doing the job. nice one Brian
Well kept equipment,everything looks great! Nice video
Brilliant video great to see classic ford's at silage. Lovely fleet of 10 series.👍
Fantastic kit, brings back memories of watching outfits like this as a kid.
Glad you enjoyed 👌
Brilliant classic Ford's and great footage, a much as I liked the music I preferred the pure sound after 👍
Fantastic video! Spotless kit, and owning a 1991 7610 super Q cab myself I know what a cracking tractor the 10 series are.
Great video. Beautiful Blues...
Good video nice to see the Fords well kept, getting the Job done.
Cracking vid pure old school 💪💪👌👌
🤙🤙👍👍
Lovely outfit the blues are just class👍
Bravo sir bravo 🚜👏📸🫡 I am a sucker for any just raw power and displacement Tractors preferably 4x4 from this era , Hats Off 🎉
Love it. Great video. Love the 68 on the pit
cant get enough of the fords in action. miss driving them . brilliant work horse, thanks for putting these videos online , cheers uk
Top class collection of machinery in perfect condition
I really like this "mostly blue" setup.... ;)
The ford ten series were by far the best looking tractors 👍🇬🇧
That’s the first time I’ve seen a all Ford line up , brilliant to see real tractors ❤️👍
Plenty more blues left yet
Ihan samanlaisia paskoja kuin muutkin. Naapurini niihin lämpes kun ei päivää ilman ongelmaa,!
Lovely to see all the Fords. They look very well. Fine work also.
The very very best tractor for the farm
Trattori Ford nel cuore ❤️❤️🥰🥰🦾🦾🦾😎😎😎
Just found your vid and what a great one it is, brings back so many memories of watching this when I was a young lad in the 80s. Those fords are a credit to you and being a ford owner myself, nothing better than seeing them working 👍
Thanks 👌
I think the ten-x was the best flywheel chopper off them all. I ran 1 for 12 years doing around 800 to 1000 acres a year never had any problems with it and we had a tm 155 on it and a ts 135 and she could handle them no problem. Fantastic video brings back lots of memories.
@edgar keep an eye out we had the other 10x on the TM it made it sing
Love it 👌👌👌❤️💯
Some setup nice collection
Mint outfit 👌
I love the ford tractors and I'm also a fan of ford as well!
Nice kit 👌
fantastic collection of ford , love these tractors , nice to drive , we had a 8210 a 6710 and 5610
Nice vid of old school Fords.
Great vid, bonny yokes best of the fords good seeing a 8210 at play
The future of the very very good ford 6600
6600 super six
Lovely tractors, all of them, better than new in some aspects, the later 10 series were the best tractors built before the plastic took over.
Its nice to see someone with a passion to keep them in excellent order, great video shots, thanks for making them available.
Thanks for the comment 👌
Brilliant video. We used 10 series for years with a tarrup double chop. We then mowed in front of the tarrup with an 8ft mower. We then got a jf900 which was a big step forward. We added a few tractors over the years which are all fords. 8210 turbo and 8630 powershift. Both drove the jf. The 8630 was a dream to use with the powershift at lifting grass. Theres also a 8830 Dual Power!(extremely rare dual power model) which we used on an kvernland centre pivot 10ft mower for a season or two. We pulled behind mostly but if we side filled we did it to the right. Its so much handier and more natural and easier on the neck. We changed the trailers to suit. I think we were lifting 18ft rows. 9:44 9:44
Sounds like a dream
That's some setup, absolutely class and a very good video
Thanks
Blue power hard at work!
Claas video , and great to hear the sound near end, tenX are a great harvester, dont need loads of power
Very good video and what very well restored tractors we have a 7610 2wd AP would like to give her a bit of a make over sometime too👍
Keep us I'm mine we have quite a few cab parts
Pity it wasn't a pure sound video. In other words no music except that of those fantastic Ford tractors.
Some sound nearer the end of the video
Nice ❤ I have 7610 mk2 too 👍👍👍
EXCELENTE!!! EQUIPO FORD SERIE 10 :):)
Brian- Jusy found your channel & subscribed. I love your Fords!! Keep them coming!!
Thanks a million 👌
awesome set up nice kit
Beautiful
i was a mech of them back in their good days ;-)
Am I getting déjà vu every time a tractor comes out of the barn so does a dog 😂
Oure 7810 still does the heavy duty jobs on the farm🤌🏿
That's the best silage video this year i remember many summers in the early 90 drawing with 7610 and 7810 silage was good craic back then 50acres a day would be a great day now its just to fast and to much pressure and money invested
Thanks for the comment glad you liked it 👍
Now lads as good as these fords are you just can not beat the 50 series deeres
We had the 4755 on it a few years ago
It was a nice combo with the powershift
czcams.com/video/2hVci86s1sc/video.html
FORD IS GOLD 💪👌👍 SIMPLY THE BEST 💪👍❤️
My dad had a 7710 but only two wheel drive but still a great tractor
they look a big TRAILER
Oh finally the music disappeared lol, she sounds non turbo to me, so about 100 on the shaft
Good job
Are there any more Fords in that shed they look very well looked after tractors so good to see them working.
Few more q cabs knocking about in that shed
I like.
Great video.
I have my own Taarup 10x, but find it very difficult to find new knives for it.
Does anyone know where to buy some?
Where did you get the black straight pipe
Did you have these resprayed by someone you'd recommend? I have a 8210 out of Spain on the farm that is completely rust free but in dire need of being stripped and re-sprayed to keep it that way! Located just east of Belfast
The 7610 is the only tractor that's been resprayed as it had a few bits of the cab sorted the rest are original
Wow that's incredible, they look like they've been restored
are they 12 ton or 14 ton k two
ROADEO CURVE 1200
16.8 cubic metre grain capacity
29.5 cubic metre silage capacity
5.50m (18ft) long body
Sprung drawbar
10 stud Commercial axles with 420x180mm brakes
100mm wide multi leaf axle spring set
Hydraulic tailgate
LED lights
High tensile steel body for a lower nett weight
Name of song please
Is the 8210 turbo charged or standard, got a feeling standard???
Yes completely standard non turbo
@@millarcontracts thanks for replying I has a feeling you would as have read the other comments that you also replied to, nice to get a reply,, so what's your opinion on the idea of running the 7710 on the chopper and seeing the difference in performance in comparison to the 8210, have you done this already?
The 8210 would be rated at 115hp from the 6.6lt the 7710 would be 97hp from the 4.4lt
Them extra 2 pots would make a difference
Have a look at my video from 2 years ago we had the 7000 on the 10x it was going every bit as well as the 8210
@@millarcontracts ah brilliant I will have a watch of the 7000, they were a 4.2 🔥,,, yea the extra 2 cylinders definitely help in comparison to a smaller 4 pot with a turbo
@@millarcontractsThe 7710 and 7610 are 103 HP in the Gen 1 & 2.. The Gen 3 were upped to 105 HP.
The 7600 and 7700 had 97 HP but the PowerPlus models on the end off their production run upped them to 103 HP which was basicly the crossover engine to the 10 Series...
Aksaray Ali Mutlu ❤🎉😊😅
Interesting, not one of these tractors would have been sold new in 2023, yet you expect us to accept that it's a 2023 video, when did ford get rebranded to New holland! thanks for sharing
The change over was 1995/96 and yes this was only 2 months ago
My favourite 8210 sweet machine. Ti be fair there all nice
brilliant video ruined by awful music, please put mic on machinery !!!
Thanks for your comment this is a very armature video made by myself with a drone and my everyday phone just not that far advanced yet.... there is sound of the machines near the end of the video
big guy pisher
??
Shame about the music…dire
7:00 onwards no music