iPhone 11 Restarting Every 2-3min (AOP PANIC [pressurecontroller.cpp.280])
Vložit
- čas přidán 14. 07. 2024
- Hello Everyone.
in today's video, we have an iPhone 11 came restarting every 2-3min so we've jumped to panics to see that we have a panic : (AOP PANIC [pressurecontroller.cpp.280]) so this one has something to do with the barometer so from the iPhone XS and up the barometer is on the charging flex cable so the first thing to do is change the charging flex cable but again the problem was not solved so I hope you watch this video till the end because a lot of interesting stuff going on in this one so enjoy.
0:00 Intro
1:48 Viewing the board under the microscope
2:33 Testing the phone after changing the flex
3:44 Checking and measuring lines
5:29 Removing upper speaker iC
6:00 Measuring under the iC
6:45 Removing ARC and main speaker iC
7:13 Soldering everything back together
7:26 Testing everything and the last update
Now All The Links Has Been Updated To Aliexpress Links Except Microscope Stuff And All The Links Are Working Fine
(BUT YOU HAVE TO SKIP THE AD TO ENTER THE LINK ANY LINK DOESN'T WORK PLEASE MAKE SURE TO MENTION IT IN THE COMMENTS DOWN BELOW)
Quick 861DW Hot Air Station: ishortn.ink/XJvdBKX2i
Hakko FX-951 Soldering Station: ishortn.ink/KtX3Wl0S9
Desoldering Wick Braid: ishortn.ink/JtUlnxvqM
Solder flux: ishortn.ink/YD18IvRKe
Phone PCB Circuit Board Holder: ishortn.ink/Lihx9N5EH
Curable Solder Mask Repairing Paint Green: ishortn.ink/LBn7pY41D
Best Stencil for all iPhones: ishortn.ink/kcY1p0IKO
Wire-type soldering iron tip cleaner: ishortn.ink/08Zdtf8AI
Solder Paste: ishortn.ink/AVh9ekcCu
Low-Temperature Solder Paste: ishortn.ink/kXexte5pi
CHIP JUMP WIRE: ishortn.ink/emd06HILE
*NOTE: YOU CAN OPEN THE UPPER EAR SPEAKER OF ANY IPHONE AND TAKE AND TAKE THE ORANGE COIL FROM IT AND USE IT AS A CHIP WIRE JUMPER
DURABLE USB UV LAMP: ishortn.ink/yzZ1D6eR9
SOLDER WIRE: ishortn.ink/lrex5VTcr
Barrier Pure Copper Heatsink Shim: ishortn.ink/y5bBOW4Ay
LED Ring Light Illuminator for Stereo Microscope & Camera: ishortn.ink/RTyoiBNVO
My Microscope: ishortn.ink/0SY8WjC3M
Polytetrafluoroethylene Tape: ishortn.ink/ohXlQouzw
MINI PORTABLE IC CHIP GRINDING: ishortn.ink/PNbBIGIUm
My Reddit: / antoinejk10
Follow Me On Instagram: / ajkb10
Join our Group On Telegram: t.me/antoinekiriaky
t.me/microsolderingrepair
Join Our Groups On Facebook: / msdrteam
Thanks for watching and as always I hope you enjoyed the video and it was helpful for you if you have any questions please leave them in the comments down below and for more interesting Fixes and Future videos please leave a like and subscribe to the channel.
AJK;)
#aoppanic #iphone11restarting #microsoldering - Věda a technologie
THANKS YOU!i have the same Problem too,and i do a reballing,it working good now.
Hi, mine Iphone SE shows panic because of missing sensors: TP1A, TP3R, TP4H, TP0Z. What should I replace in this case? Thanks!
Thanks thanks brother gerad very ex....t job.
Sound lines not shorted . Lines have a lot of caps . To measure line you must discharge them. You just changed all the amplifiers, but the problem with reboots if you left it for another reason
I agree with the discharging,each line has 2 caps but for the SPKRAMP_TOP_TO_COIL_POS the line is not shorted on a functional working board so until this day the customer didn’t send his phone back and last time I checked like 2 weeks ago when I started to edit the video 😅
Thanks for this info I changed the charging socket. I also removed both the face id and the charging socket from the card, but the device restarts again.
SD: 1 BC: 1 RC: 0 BS: 2, Missing sensor(s): Prs0
I have the same thing, what did you do next?
find a good quality or original replacement part and replace the charging socket.@@ArturD-gn3gw
AOP PANIC K2 Bosch controller restart when volume is max. Any idea what issue is?
I have Iphone 11 with erorr log on 3utool [crash reson: problem conecting CPU peripherals][crash code: panic cpu x caller ] due to this problem i cant activate my phone, its show unable to activate request update but its not going off randomly, how to fix it, I though the housing was changed
Hello i have panic full it says "panicString" : "panic(cpu 0 caller 0xfffffff01254cf2c): \"SEP Memory Protection Module error\"
Hello, thank you again for your videos. Do you know this breakdown by chance an iPhone 11 Pro which reboots every 180 seconds with the error code Panic full sensor missing TP2C thank you
Hello,send me full panic on my telegram
i have the Problem with iphone 12 mini missing tp3r Sensor after i made board reball. Do you have any idea. Thank you for your video. please show also my chanel.
Bro you’re fucking nailed it
Nice
its very common in iPhone higher models the boot loop after 2 to 3 minutes related to charging flex audio chips and charging ics
my iphone 13 pro max has it rn
is it covered by apple?
What is 'aop nmi: no response to ap power notification' means? (Ipad m1 pro 11)
Replaced 3 times, same symptom. Is this a hardware problem?
DM me
hi, i have had the prs0 error and restarts, tried to install a new oem charging port, had the same issue with it, but the weird thing is after trying a few new charging ports flexes, the prs0 error is gone but now the touchscreen is not working anymore. do you have any ideeas what is the issue please? :)
DM me
before update work fine but after update it same problime wtf why i need do this
What about the shield you have destroyed? Do you put another new one ?
The phone can live without it
Hi, My xs keep restarting when only not use the phone… that means when the display stand even until battery full empty , no any issue…
report says Possible issues U2700/U6110/J6400
May i know what kind of issue that…
Thank you
DM me
@@AntoineKiriaky10 how to DM you brother
👍👍👍
Hi, i am not sure, did you change the ICS? or only do a reballing?
Change.
Bro i have short this side and arc side first must i check arc ic
Or north ic
Now i have short arc ic and north speaker and south speaker pleas what must i do
DM me
Top
Which message is "AOP PANIC - K2-Bosch control channel write failures"? It's usually okay, but if you raise the volume to the maximum, it reboots and panics like that pop up.
Try original charging flex first, and if it still the same DM me
@@AntoineKiriaky10 what is solution?
I just simply replaced power flex,
I did the same work. Change the ICs like 2 times and still rebooting. Any advice?
What is your panic ?
Do u know how to fix a kernel data abort sir
DM me
What does "panicString": "panic(cpu 4 caller 0xfffffff01a744348): mean?
Can you send the full panic please
How do I get in touch with you? Would like to have IPhone 11 checked. Reboots after 3 minutes.
Check my channel and description
Itu ic apa yang diperbaiki?
Hi, mine says "panic(cpu 1 caller Oxffff((fO1ce70c88): AOP PANIC - No pulse on
Ox1119dc0 - power(2)
No pulse on 0x1119dc0"
Alto Falante, flex do power
The editing is too much in ur videos