AP Servis instruktáž: Výměna spodního topení trouby Whirlpool a Bauknecht
Vložit
- čas přidán 21. 01. 2019
- Instruktážní video k výměně spodního topení u vestavných trub Whirlpool a Bauknecht.
Topení i jiné náhradní díly můžete zakoupit zde:
Topení dolní 421: www.servis-whirlpool.cz/nahra...
Topení dolní 1150W: www.servis-whirlpool.cz/nahra...
@APservisPraha
Praha 10, Francouzská 114
Mailto: objednavkynd@apservispraha.cz
www.servis-whirlpool.cz - Věda a technologie
Dakujem za video AP Servis!
A couple of comments. First thanks Peter for this video, concise and helpful. Second better to wear gloves and a mask when handling this kind of insulator. Third @Tomas is right you do not have to swap the cables. Actually this do not harm the equipment and you can go back and swap the cables and everything is ok but you have to do that ASAP. The reason is that the main switch of every appliance cut off the non-blue line and, nowadays, in your home you have one wire (non-blue) with 220V and one with 0V (blue) so if you swap the cables you have some parts of your appliance still connected to 220V even if the appliance is switched off. You might like this so that, whenever the appliance insulation fails the (differential) protection switch everything off immediately. Yet you might not want the fridge to melt when something fails in your home and you are away. In the end, this is just to say the two situations are not equivalent and, usually, people like to keep this coloring consistent. However there are whole nations that don't care since you can connect the schuko plug into the wall socket in two different ways in Italy and you have not these two options in France.
díky
Why at the begining there is blue cable on the right and when you assamble it is on left? Will this work?
you've good eyes Thomas. But as it's AC, this shouldn't matter. The current changes direction all the time 50x a second.
Any one still watching video ? :)
Well i have question, what about front hooks ? Do they need to set on some specila holes ? I have replace bottom heating element on my oven and now revetment bottom of it is aroumd 80C what seama like to much to me ..... i guess i have contac of heater and revetment or isolation is removed or 80 C is normal ? Anyone have experiance ?
Co je to za komponent nalevo od trafa větráku, jde tam bílý a mpdrý drát. Díky! (0:34)
Na našem webu najdete servisní rozkresy všech spotřebičů www.servis-whirlpool.cz
Ja mam troubu Framtid, tak to u vás nenajdu, protože je třeba zadat označení trouby Whirlpool. Ale ta moje vypadá stejně. Patrně to bude topné těleso okolo ventilátoru.
@TheYeeshkul v tomto případě bude lepší obrátit se na informace výrobce spotřebiče či prodejce. Jsme speciálka na Whirlpool značky
Jsou to kontakty kruhového topného tělesa, co jde okolo ventilátoru.
Škoda jen, že přehodil dráty😂
Kable kolorami pomylone przy składaniu