Why is it not Patented? Drip Super Glue on the LED Bulb and be Amazed!
Vložit
- čas přidán 12. 02. 2024
- Why is it not Patented? Drip Super Glue on the LED Bulb and be Amazed!
🔴Wrap an LED bulb with electrical tape and you will be amazed - • Wrap an LED bulb with ...
Glad to see you on my video - Every video is creative hacks that help people in everyday life!
See, rejoice and develop all this just for you!
Don't forget to subscribe and like, glad to see you on my channel, you can watch my other videos✔👇
🔴 More of my videos here: www.youtube.com/@CreativeHack...
On this channel you will find useful tips, time-tested life hacks, you will need it in your everyday life and it will be useful, WELCOME TO MY Channel CREATIVE HACKER !
#superglue #lifehack #ledbulb - Věda a technologie
This is dangerous for the following reasons. a) By shorting one of the LED's the voltage on the others is higher and out of range. b) The used powder to connect over the missing LED could deteriorate and heat itself up to eventually catch fire. c) The only pushed back on bulb part might more easily get back of because it was glued. Touching the inside of the bulb's trunk will give you an electric shock and could even kill you. I strongly advise not to perform the repair attempt as shown in this video.
a) might not be true, depending on the driver. If it's a decently designed constant current driver, then the voltage might not be out of the absolute electrical specs of the individual LEDs. Anyway, because most of the bulbs are Chinese bulbs with a driver designed and made on a boat, your point stands. After all, why did that LED fail? Most likely the cooling solution was insufficient, meaning the design was bad, meaning everything else was probably bad.
Instead of doing all that, you go and buy a light bulb😅
That would be way too easy. And what do you do during all that time you are not working on the bulb?
Thanks for the comment
Waarom is dit niet gepatenteerd? Wat een stomme vraag is dit. Wij zouden ons beter afvragen waarom dergelijke video's op you tube en dergelijke komen. U creëert hier een super gevaarlijke situatie
Wij begrijpen uw bezorgdheid, maar deze video is bedoeld voor educatieve doeleinden en moet met voorzichtigheid worden uitgevoerd. 🤔👍
@@CreativeHacker7 educatieve doeleinden? Als u de ambitie hebt om "educatie" te geven moet u meteen erbij vermelden dat men dit beter NIET toepast, en zeker niet spreken over patenten 😒
You forget - a First Aid Kid - is a must - to be prepared when things don't turn out as easy as it seems.
There isn't a First Aid Kit against electrocution out there.
Don't forget: at the end of dead LEDs in that configuration is full 230V to ground.
Detecting a dead LED needs only an Ohmmeter:
in one direction is infinite resistance and in the other a much lower, because LEDs can be considered as an rectifier.
Without any high voltage you risk nothing. The Ohmmeter function is driven by ONLY 9V
@@bildungfehltimland He said First Aid Kid, meaning having a kid beside you to pull the plug if you start shaking is a must. Just make sure it isn't your own kid. Also, make sure it isn't Billy the Kid, there is no such thing as First Aid Billy the Kid, only Kill Yourself Aid Billy the Kid. (If I wasn't very clear, don't worry, I'm Romanian, we're still using electrical wires made of wood, the same good old material Vlad Țepeș used to make those missiles designed for high-precision ass targeting. You may know Vlad Țepeș, pronounced Tzepesh, as Count Dracula).
Used a lighter to burn the plastic shielding but still had to use a knife off camera 🤦♂️
Sorry to hear about your struggle! Make sure to watch the whole video next time for all the steps 😊.
This is dangerous, CZcams should take it down.
It's a cool DIY trick, but be careful when trying it out! 🚫🔥
Graphite conducts electricity this will burn a hole threw the housing of the plastic. if you're lucky enough it doesn't catch on fire.
Graphite conducts electricity, but when used properly with super glue on an LED bulb, it can create amazing results 🔥.
Watched it , could not be bothered, too much trouble.And how long does the bulb last after all this mucking about.
No long as the DC driver is still putting out the same voltage, so the remaining LEDs are being overdriven, for 20 pence he could have just soldered a new led on and actually repaired it😂
forse un ponte fatto con un pò di stagno avrebbe risolto meglio il problema perchè è vero che la grafite è conduttiva quindi crea un ponte ma la colla cianocrilato rischia di rendere tutto non conduttivo, comunque vedo che ha avuto successo anche il tuo metodo quindi bene così, mi sembra però che non faccia molta luce ora, forse perchè appunto crea un ponte poco conduttivo a causa della colla?
I don't like led bulbs because of the frequencies' that are not good for humans. Just saying
Quality LED bulbs do not flicker
Interesting. Could you please elaborate on that issue?
this is a pile of red flags from start to end. dont know where to begin.. Mum i saved 5 euro, and the house is burned down and the dog is eletricuted
Looks like you're not a fan of DIY projects! Maybe try our next tutorial on how to safely repair a broken vase instead 🏠🔌🐕.
😢 супер тъпотия. До няколко дена лампата ще изгори
You must reduce the current by the driver.
Reduce the current by the driver for a safer and more efficient experience with the drip super glue on LED bulbs! 💡👍
Ojalá 🇲🇽
¡Gracias por tu comentario! ¡Ojalá que puedas probar este truco con tu LED! 💡👍.
Solder a New Led inside!
Sorry, I prefer the super glue method for this project 🌟🔧.
I mean the LED inside the bulb!
Desolder and solder with hotair wiring Station. Its so easy!
See how bright it isn't?
All that power is now being dissipated as heat in the graphite.
There is onlyt a tiny amount of current getting through the graphite, that is why it so dim and so little light. Just a stupid click bate channel, put them on your do not recommend list.@@stalincat2457
... or buy a new one.
Why buy a new one when you can easily fix it with a drip of super glue? 💡👍
"Burn your house down with just a drop of super-glue". No thanks.
Did I see the "bad" light turn on as if it were totally fine just after he marked the "bad" led around 2:20?
The wet ink is probably a bit conductive.
1358 version.
Every comment is a gem. Thanks for adding value to our page! 💎
Or just buy a new bulb for $1
I like your idea
Absolutely
It depends of good or bad fortune.😆
Is that low price of a new bulb worth that risk???
ma na goccia di stagno col saldatore no???
Ma certamente! Dai un'occhiata al video per vedere come funziona 🤯🔧.
nice work!
Thank you! We're glad you enjoyed it! 😊.
Nu faceți ca el ,becul va lumina slab și se arde repede!
Nu vă faceți griji, acesta a fost un experiment pentru a demonstra un concept interesant! 😉🔧
I’ve got a much easier way to repair the bulb, just go buy a new one.
And how do make a CZcams video out of that?
Thanks for the comment
I have wasted my time...
You missed out on a game-changer! 💡 Better late than never, give it a try and see the magic! 😉
facevi proma a cambiare il led...il carico e troppo si brucia ancora
Non serve cambiarlo, prova a mettere una goccia di super colla sull'LED e sarai sorpreso! 😉
you do very well
Shit experoemnet
It's all about the experiment! 😅 Keep watching for more surprising tricks with super glue!
CHEAPSKATE😂
''Who needs a patent when you've got DIY skills like that? 😉💡''
🤮🤮🤮🤮🤮🤮😭😭
Really appreciate your input! Stay tuned for more content. 🌟