You should really spend the time trying to bend those radiators back. Put them on a table or the floor and with a block of wood tap then back plumb. They are soft aluminum and makes it an easy job👍👍
i just subscribed today but have been watching videos for a lil bit. ik alot of people would disagree with me but one day in a video could you tell us how you started in the hustle
you should wash that engine properly before mechanical works, when You assembling new piston dust from that dirty water hose easily goes in to the crankcase.
Yo bro I’d love to get started doing what you do your a big inspiration to me. I was just wondering how you find you bikes, like where do you look and on what sites? Thanks bro
@@johnberry2877 I’ve found it pretty easy to find a decent bike around for a good price. I think blown up ones cost more and are harder to find becuase people want projects 😂
man I dont know how so many people in your area treat their bikes so bad lmao, I just got my 2022 crf450 and planning on making it last 4-5 years, have no idea how those people clap out new bikes so fast or wash them at all lmao have yet to seen a clean bike when you pick them up
If you weren’t so far from me I’d buy it from u😂 but I got a 2012 rmz250 that has the same ticking noise this did you think I should do the timing chain or what do you you think it is on a rmz250 😂🙏🏼🙏🏼 all the rmz250s you had didn’t make the noice mine does😒😂
Dj Garage Why Cr 125 1993 keep scraching My piston I ride only 3 Time and it blow up it blow up 2 brand new piston only 2 hours in it so can you help me fix the problem
@@DJsGarage Cylinder is stock size the bike is all servise with Wosner The cylinder is brand new no scraching and the cranks is new is all service top and
I hope the scumbag who stole it gets stomped by the bike !! Worthless dirt bags won’t work for their stuff 🤬🤬🤬🤬! My buddy got his stolen right out of back of his truck. The rear wheel was chained to the swing arm and they literally dragged it and carried it for miles before it was trucked away! However, he did put his birth month and year on the number plates. Well , he put out a add on Craig’s list and the ass hat who stole it rode it around before removing the numbers and he was turned in by an old dirt biker down his road ! Thankfully he got his bike back within a couple days and the perp was arrested. It always a good idea to put numbers on your plates regardless if you race or not !
Both those radiators are pretty bent, that bike was ridden hard. You should re-grease all the bearings and change the oil in the forks and shocks
Wow, I didn't know the 2018's came with curved radiators. That's sweet!
OEM!
You should really spend the time trying to bend those radiators back. Put them on a table or the floor and with a block of wood tap then back plumb. They are soft aluminum and makes it an easy job👍👍
If you try and bend them back they could bust open
Just replace them.
@@shawnmoore5621 exactly
Bro that's dumb see so many people crack them when they do that just spend the money to buy new ones or just run those
i just subscribed today but have been watching videos for a lil bit. ik alot of people would disagree with me but one day in a video could you tell us how you started in the hustle
That bike has seen better days. But thats the life of a motocross bike.
“13 hour bike”
… yup
I agree
I bet it was a beginners bike didn’t know how it worked didn’t use clutch right and probably redlined it alot
Great bike build man loved it 👍
loved the video and cant wait for the next one
I love this video upload schedule
I think we all do 😁
It would be cool if u did a build on a cr500 or kx500
Trying to find one!
Hard to find
@@DJsGarage there is 3cr500’s in southern colorado one runs ones a parts bike one is mint but needs a rebuild
you should wash that engine properly before mechanical works, when You assembling new piston dust from that dirty water hose easily goes in to the crankcase.
This is the perfect 450 to do a 450x build on it..
Boss A quick look at those radiators. They need replaced bent to hell and back.
Yo bro I’d love to get started doing what you do your a big inspiration to me. I was just wondering how you find you bikes, like where do you look and on what sites? Thanks bro
U deserve more subs
Nice video bro have an 19! Deff helped I’d like if you’d mention torque specs
I just sold my bike a month or so ago and now I want another lol shoulda just kept it
Yep ! They are NOT getting easy to find and the prices just keep going up and up 🔥🔥
@@johnberry2877 I’ve found it pretty easy to find a decent bike around for a good price. I think blown up ones cost more and are harder to find becuase people want projects 😂
Aluminum brightner the fwak out of the bike
Good job bro
It’s Lit 🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥🔥 Bro
when selling stuff do you close the garage so they dont know you have other toys?
I ussually meet them at a local gas station
I know your a bike guy, but I wanna see a sport quad like a Raptor 700r, Yfz450r, Trx450r, Trx400ex, Banshee??
rockymoutain has a place in ky to not just utah
those radiators make me cringe
Same haha
Did you ckeck the ring gap? Forged pistons require more clearance than OEM.
What’s good cuh
All these new strokes like timing chains and valves pistons some even like to eat the head up where cams lay lol Bike should clean up good
Is it just me or are half the dirtbike sim the world in South Carolina
Uhhhhhhhh idk
man I dont know how so many people in your area treat their bikes so bad lmao, I just got my 2022 crf450 and planning on making it last 4-5 years, have no idea how those people clap out new bikes so fast or wash them at all lmao have yet to seen a clean bike when you pick them up
My 2021 yz125 was pretty clapped out too😹😹
@@DJsGarage they just dont care apparently lmao
cant believe how clapped out that bike was being as new as it is.
Whoever owned it, gave two fucks about it.
great content as always
Thought the 19's came with black rims. Aftermarket rims?
Holy fuck that bike was used look at the rads
Support RUMBLE!
Hey I got a 2019 crf450r and I was curious how much will it take to tear down the engine and is it hard to do.
Get a Suzuki Rm125 07 the last one when they done last update on the motors
I want one
@@DJsGarage I have a 07 cr125r last year and I will not sale it I want a rm also just can’t find one
If you weren’t so far from me I’d buy it from u😂 but I got a 2012 rmz250 that has the same ticking noise this did you think I should do the timing chain or what do you you think it is on a rmz250 😂🙏🏼🙏🏼 all the rmz250s you had didn’t make the noice mine does😒😂
We're you using any torque specifications?
Did you put actual oil on the clutch side
Where are you in SC? I moved down here few months ago. Outside of Charleston
Upstate
Like your video question how do you advertise your bike for sale
Facebook
How do you know which piston size to put in the bike?
Dial caliper
how do we buy these?
How much did you get/sell the rzr for?
Paid 5 sold for 7.5
I found a 2006 crf450 for only $2000
Dj Garage Why Cr 125 1993 keep scraching My piston I ride only 3 Time and it blow up it blow up 2 brand new piston only 2 hours in it so can you help me fix the problem
U probably need new cylinder or crankshaft
You may have put the rings in the wrong way or your pistons may be the wrong size or your cylinder is bad causing it to blow up
Cranks probably bent
Could be big bore cylinder with stock power valves?
@@DJsGarage Cylinder is stock size the bike is all servise with Wosner The cylinder is brand new no scraching and the cranks is new is all service top and
RM125 :):);)
Would you want to buy my 2016 Yamaha yz 250F it’s seized and clapped from a wreck I got in (3,000)
Maybe. Where you located
@@DJsGarage Washington I was wondering if you wanted to cause I have to go over their to a friends anyway
Sell me this bike!! Mine got stolen, from Fayetteville
I hope the scumbag who stole it gets stomped by the bike !!
Worthless dirt bags won’t work for their stuff 🤬🤬🤬🤬!
My buddy got his stolen right out of back of his truck. The rear wheel was chained to the swing arm and they literally dragged it and carried it for miles before it was trucked away!
However, he did put his birth month and year on the number plates. Well , he put out a add on Craig’s list and the ass hat who stole it rode it around before removing the numbers and he was turned in by an old dirt biker down his road ! Thankfully he got his bike back within a couple days and the perp was arrested.
It always a good idea to put numbers on your plates regardless if you race or not !
Sealant job on the cam cover would be enough to put me off buying the bike... sorry 😆
It all peels off…
How much
5k 💰
@@DJsGarage I’d give you 4750 is it titled ?