Corvette C6 Grandsport Long tube header installation! PT1 (Speed Engineering)
Vložit
- čas přidán 17. 05. 2022
- This video is the first of a series of clips focused on upgrades to the C6 Corvette. You will see me remove the stock exhaust system and install a pair of Speed Engineering long tube headers in PT1. This is a follow up to the comparison video between Texas Speed and Speed Engineering.
Tap the THUMBS UP if you've found this video useful and SUBSCRIBE to stay up to date with the channel. Thanks!
CZcams channel: / @smokingasphalt8050
Instagram: smokingasph...
Facebook: / smokingasphalt
Website: www.smokingasphalt.com/
______________________________________________________________________________________________________
****Mike Myke's before and after dyno test of my T-rod modded LS3 intake manifold!
I Gained 44rwhp With These 3 Mods!!! Here’s The Dyno Proof
• I Gained 44rwhp With T...
______________________________________________________________________________________________________
Longtube Header & X-pipe comparison! (Texas Speed vs Speed Engineering) for C6 Corvette
• Longtube Header & X-pi...
______________________________________________________________________________________________________
Fbody Camaro (427 LS3/Manual trans) NEW personal best at the drag strip
• Fbody Camaro (427 LS3/...
______________________________________________________________________________________________________
Fbody Camaro vs C6 Vette (Battle of the Stroker LS3's!)
• Fbody Camaro vs C6 Vet...
______________________________________________________________________________________________________
Camaro SS, DIGS, Rolls, & a RIDE-A-LONG! (SmokingAsphalt FBODY)
• Camaro SS, DIGS, Rolls...
______________________________________________________________________________________________________
Music by: Hey Sailor: Letter Box. - Auta a dopravní prostředky
Most detailed c6 GS header video I’ve watched. Thank you sir! Installing mine this weekend
Much appreciated bro! Good luck with your install.
nice to see another 2013 IO C6
Looking forward for pt2
Perfect music for header install. I will be putting on my pfadt tri y headers and midpipe on my gs this summer.
Right on! Good luck with your installation.
Looks great, very informative and nicely edited.
Thank you Terry vetteharley man
Looking forward to the rest of this. Can't wait to see your overall thoughts on the Speed Engineering product and hear what you thought of the install. I'll be doing mine myself as well.
Great video! 👌👌
Thanks bro!!
Can you please post a pt.2 of what it sounds like, i see that you lost the media LOL, i want to hear the longtube headers & x pipe to see if its any good.
Finally, someone wearing safety glasses. :)
No anti-seize on the new header bolts???
A tip on loosening those bolts - tighten 1/8th turn before cracking them loose. I know, counterintuitive, but it releases the threads and keeps you from breaking any bolts.
Excellent tip, heat also helps.
Great video man! Do you have the part number for the gaskets, ARP bolts and 02 extension harness ? Please & thanks !
ARP Stainless Steel Header Bolts 400-1209 (12pt)
ARP Stainless Steel Header Bolts 400-1110 (hex)
Chevrolet Performance Exhaust Manifold Gaskets 12617944 (you'll need 2)
ICT Billet Oxygen Sensor Extension Harnesses WE0XY33-24 (2)
All of this is on the drop down on Speed Engineering's site and much cheaper if bought through them.
Where did you pick up those ramps? Great Video.
I got them from Walmart, thanks man
How'd they fit overall? I'm looking at the 2" set from them for my 2012 GS.
Great fit overall. Didn’t have to modify anything.
Off topic but you use a low car jack or a regular one? I’m about to get a GS and I want to know if my current jack is fine
I use a low profile jack man.
How long ago did you order those headers? Reason I’m asking is speed engineering discontinued that long style header and went to a smaller mid length header which a lot of people don’t like now
Interesting, this was purchased March 22’
I agree I just purchased the new style headers!!!! What a pain to install them way different from any of this videos I’ve seen on here. If I would of known they went differently I’d never purchased them
1 just bout a c6 and I got speed engineering 1 7/8 headers with X pipe do you think this will be loud with stock mufflers?
It will be louder but nothing crazy.
I’m hooked (pun intended :), but I can’t find Part 2?
Part 2 coming soon bro!
Did these hook up to the stock mufflers? I’m trying to install on my GS now and can’t get the slip joints to line up with the mufflers
Yes these lined right up with the stock over the axle pipes. The kit came with mid pipes for GS, ZO6, or base.
@@smokingasphalt8050 hmm, and you tightened the headers up and then worked your way back and hooked up the mufflers last correct?
@@thiggtrouble that is correct
Do you have a part # for the gaskets and arp bolts? Thanks
ARP Stainless Steel Header Bolts 400-1209 (12pt)
ARP Stainless Steel Header Bolts 400-1110 (hex)
Chevrolet Performance Exhaust Manifold Gaskets 12617944 (you'll need 2)
Does the Xpipe connect well to stock NPP mufflers?
Yes, it did no problem.
Where is part two
How was the fitment ?
Very good on this GS, no complaints!
Was this a dry sump car?
No, this was a wet sump automatic.
Looks great, my only complaint is you have uploaded sound clips :(
Yes sir! I’ll have a before and after sound clip in part 2🤙🏼
rip part 2 😭
What happened?.no part 2.
Unfortunately I lost the media from that install. Funny thing, I've installed a dozen of these systems since this video just haven't recorded it. My apologies!
I guess he never finished the install….
Haha, yeah that GS is still on jack stands in my garage…🤙🏼 seriously I need to complete part 2. Since then I’ve done quite a few C6 builds. Sorry.