Fixed it with a steal bar. Plastic Pin was broken. Sony should fix that issue. They just need a New mold for the trigger with a little more plastic to stabillize the pin. Sorry for bad english !
No problem I tried it out of desperation , but it really works , I imagine anything like PB blaster or WD 40 would work , haven't had a problem since I did it
IMPROMTU FIX I did not have a screw-driver that would fit those very skinny screws but I figured out HOW to push the R2 button so it doesn't stick. Push the R2 trigger on the outer right edge/corner ( NOT squarely on) and when you push it, push to the LEFT. This would be like XB1 R1 button. Your actually pushing the R2 button to the left from the right hand side of the trigger, kinda diagonally to the left. Mine does not stick. I finally used a regular (not phillips) screw driver from a jewelers set and a pair of pliers for grip.
I replaced it springs inside the button for the stronger one, still got fault but its FULL FUNCTIONAL ...like before :):) ...stronger spring pushes it back to the end even with damage I hope someone has helped...enjoy
Fixed it with a steal bar. Plastic Pin was broken.
Sony should fix that issue. They just need a New mold for the trigger with a little more plastic to stabillize the pin.
Sorry for bad english !
they wont fix it bro, use your brain it makes money
Thank you man it worked perfect!! You can use many sorts of oil, except cooking oil lol
I used massage oil from my mother it worked perfect!
Unfreakingbelievable !!! I used wd40 and it works SO FAR!!! Thanks dude!!!
No problem I tried it out of desperation , but it really works , I imagine anything like PB blaster or WD 40 would work , haven't had a problem since I did it
Oh shit it worked, good looking, I used the jojoba oil I use for my beard.
cool
I took mine apart and took a little spring out. it works great
thnx it works with WD-40 also
Sorry to the person who put the whole damn can in his joy stick it only takes 2 drops
All u do is squeeze the button open so u can see the hinge and put a drop or 2 in it
is this to fix the problem when playing shooters where u go to aim and the damn button stays in just enough to keep firing after you u killed someone?
IMPROMTU FIX
I did not have a screw-driver that would fit those very skinny screws but I figured out HOW to push the R2 button so it doesn't stick. Push the R2 trigger on the outer right edge/corner ( NOT squarely on) and when you push it, push to the LEFT. This would be like XB1 R1 button. Your actually pushing the R2 button to the left from the right hand side of the trigger, kinda diagonally to the left. Mine does not stick. I finally used a regular (not phillips) screw driver from a jewelers set and a pair of pliers for grip.
Okay? The R2 of my dualshok4 broke yesterday .. Could you pass me the "step by step" how to fix? Have to open the control? Thank you!
I have to press a little hard now to get it to work mine doesn't stick
no problem n it probably works for all the buttons
i just used wd40. I can say that it isn't perfect but it does improve
I have the same problem it gets stuck please help anyone? Do i gotta open the control ?
same here pin is broken L2 and R2 tigger
2 controllers down waiting for playstation to fix it
I only put one drop in...
Please comment if the video was helpful
It works on mine now all of a sudden it lags i push the r2 n it takes like 3 seconds to actually work
Same happened with me!! Any advice?
Well i already gone through 2 controls n i use baby oil n its working fine
its pissing me off so this happened to a lot of people and they charge 60 for a new 1.
I replaced it springs inside the button for the stronger one, still got fault but its FULL FUNCTIONAL ...like before :):)
...stronger spring pushes it back to the end even with damage
I hope someone has helped...enjoy
Well this wasn't helpful at all it completely broke my r2 button now it doesn't work...
Same with me man
Can any body tell me wot other things i can use???
Put wd40 and it works fine!!
really? a troll to break peoples controllers.