Suzuki Every Da64v Radiator Flush with ABRO Radiator Flush n Waxed with Tonyin CERAMIC Wax
Vložit
- čas přidán 29. 08. 2024
- Hey guys, in my previous video I showed you guys how to properly wash and clean Radiator.
After Few months, i got an issue with the thermostat , so i changed it
But i lost a lot of coolant in the cooling system. So i poured Low grade coolant and Tap water.
After couple of months. It got rust in the cooling system also in the radiator.
So i used ABRO RADIATOR FLUSH and cleaned thoroughly until it gets clear water.
Then i Thought to clean all the sensor of throttle and plugs also injectors with PCV valve.
At the end, I used Tonyin CERAMIC CRYSTAL COATING WAX. And it is worth trying using.
If you are not a subscriber, Please subscribe to my Channel. Hit like, Share and Comment.
Thank you!
ALLAH HAFIZ
Hey guys, in my previous video I showed you guys how to properly wash and clean Radiator.
After Few months, i got an issue with the thermostat , so i changed it
But i lost a lot of coolant in the cooling system. So i poured Low grade coolant and Tap water.
After couple of months. It got rust in the cooling system also in the radiator.
So i used ABRO RADIATOR FLUSH and cleaned thoroughly until it gets clear water.
Then i Thought to clean all the sensor of throttle and plugs also injectors with PCV valve.
At the end, I used Tonyin CERAMIC CRYSTAL COATING WAX. And it is worth trying using.
If you are not a subscriber, Please subscribe to my Channel. Hit like, Share and Comment.
Thank you!
ALLAH HAFIZ
Good job. I do apply this to my every wagon sporty. thanks for uploading.
Your welcome sir. Keep supporting
Thank you for uploading. More power to you.
Thank you sir. Keep supporting
Mashallah bro keep it up❤️
Thankx brother
❤❤
😍
Are going to drain the old coolant before put the cleaner solution or you mix the cleaner solution to the old coolant?
I mixed it with my old coolant. But you can also mixed with only water but it is recommended to mix it with old coolant. It gives maximum results. Thank you
How many liters of coolant we put on the radiator after we fully clean it sir?
@@saidskalipa7971 sir it is depend on the Unit Variant. If it is Turbo, then almost 4.5 litres of coolant will be used. If it is a normal variant, then 3 to 4 litres is used.
Thank you very much.. god bless you
@@saidskalipa7971 your welcome sir.
I drain po ba dapat ung dti bago lagyan ng pang flush or ihalo na po s dting tubig?
Sir If you could Write in English. It will be helpful for me to understand it better but As I guess you are asking for draining the flush or or mix with water?
Well you can mix the Radiator flush or cleaner on the existing coolant or water and run the engine for about 15 to 20 minutes then drain it. After draining repeat the process, this time only water will be using. Repeat the process until you get clean flush drained water.
Then you can Add new coolant and you are good to go.
Thank you !
Boss para sa Anong unit na transformer Ang ganyang radiator?
Any kind of radiator . It works perfectly