How to convert a Cisco AP from Lightweight to Autonomous by Khurram Nawaz
Vložit
- čas přidán 11. 09. 2024
- In this video I will show you how to convert Cisco lightweight access point to Autonomous or standalone access point.
Commands: -
ap: delete flash:private-config
ap: delete flash:private-multiple-fs
ap: set IP_ADDR 172.16.10.100
ap: set NETMASK 255.255.255.0
ap: set DEFAULT_ROUTER 172.16.10.12 (TFT Server/ Macbook IP)
ap: tftp_init
ap: ether_init
ap: flash_init
ap: tar -xtract tftp://172.16.10.12/c1140-k9w7-tar.153-3.JD.tar flash:
ap: set BOOT flash:/c1140-k9w7-mx.153-3.JD/c1140-k9w7-mx.153-3.JD
write set to view the parameters
ap: set
make sure
BOOT=flash:/c1140-k9w7-tar.153-3.JD/c1140-k9w7-tar.153-3.JD
ap: boot
If you have any questions please drop a comment, thank you!