Gotta be honest I’m scared to clay, due to me being a novice to polishing. But your clips are absolutely a confidence booster. Maybe in the future you can give us “driveway” folks a step by step? Pads, compound etc? Baby steps for some if us baby’s lol…..thanks Josh
@@KeysDetailing - you should post a link to your vids if you want ppl to watch them. This comment is over a year old but it's impossible to know if it's closer to 1 yr or 2 yrs old. Posting a link removes the ambiguity and makes it easier on everyone.
I did it! 5 year old White Jetta never been clayed just stated down the detail road and wow, just do it. I used iron remover and a rinsless wash. What a difference now I just got to get the confidence to polish nd paint correct.
Dude!! You’re a lifesaver. I was about to clay my vehicle the traditional way. I had to search up a new method and for some odd reason you popped up on my recommendation list. This new method of clay bar looks way better than the little clay bar. Definitely going to order this today.
Thank you for posting that Josh. I actually had some clay on me, but I was thinking to grab those clay mitts from The Rag company just because it is easier. Glad you explained in detail the difference. It helps a lot!
Right on man. As a beginner in the car detailing business i have to thank you for your videos. Thank you for sharing your knowledge man, you’ve helped me a lot already
Love the clay scrubber from the rag company. Had to get my hands on it as soon as it came out. I find it to be very useful for stuck on bugs and debris along the front of a car when I pair it with p&s bugoff before a wash with p&s pearl auto, which gives a ton of lubricity so theres never really any marring at all. Great video!
I’m the one that told you to try them 😂. I’m so glad you like them man! Haha. I haven’t used the mitt or the block but man that material is great. Great for cleaning as well, because you can see the contamination come off. Sorry my rant is done 😂
I just wanted to say that I’ve recently gotten back into detailing. I make a bunch of how-to CZcams videos on car stuff and track days, and just wanted to chime in and say thank you for the videos you make. Extremely helpful, well done, and to the point. Keep it up! Subscribed.
As a rule, I generally use the Mother's Synthetic pad for my primary claybarring. The one very important aspect of my process is that I keep a well dampened Terry cloth hand towel folded lengthwise over my shoulder. 2 virtues are because the towel is damp it tends to stay on my shoulder [I generally wear a t-shirt] and after several passes with the synthetic claypad I wipe it clean while the towel is still draped over my shoulder. It is quick and efficient- MOST IMPORTANTLY - it keeps the pad clear of contaminants! It is amazing how much crud [depending in the vehicle] can be seen in the towel. It certainly keeps any potential marring to a minimum. As Josh mentioned about the mitts - keep them clean. It makes the difference!
@AudieConrad - Good to see that you have had success with these pads. I plan on using the Mother's Speed 2.0 clay soon for the first time on a very neglected Scion xB. If you have one near you, I found them available at Ollie's for $9.99 each... along with quite a few other Mother's, Griot's and Chemical Guys products at greatly reduced pricing.
@superado2k Gee, that's a better than good price! Don't know the store but will look it up - thx 4 sharing. Good luck with your project. Shine on you crazy diamond!
Great explanation Josh. What about using the mitt or sponge with a high lubricity soap? Wash then foam with something like Mr. Pink and clay with that in the shade?
Just wanted to give a tip when using a clay mitt or towel. I'll wash my whole car with my regular wash mitt and get it all rinsed off Then I'll get new/fresh soapy water in my bucket, and just dip my clay mitt into the wash bucket amd clay the car. The soap water has plenty of lubricity for the clay mitt.
I too have been using the TRC synthetic clay mitt and these were done to help my ceramic spray waxes bond to the surface I never did any polish afterwards as the car were light colors and the owners were not paying for the service. Most customers want a clean and shiny vehicle and cannot detect a swirl or any micro marring.
Excellent video! I've not used a traditional clay bar in awhile unless you have heavy contamination and then you need to polish its abrasive. The ultra clay and the DIY Detail clay towel are synthetic like you say. The DIY Detail for sure I know contains no abrasives but you need ample lubrication like Josh has. I personally am primarily rinseless that gives me a little of an edge and then I add the iron remover and clay in one step. Depending on how heavy your decontamination is, and what media you use. With ample lubrication you do not always have to polish. I really like this video! That Porsche is going to look fantastic
Thanks, can i ask what iron removal you are using with the clay and is it deteriorating the clay at all? most itron removes are neutral so its probably fine but i just wanted to see what your experience was
Yes synthetic clay can scratch but if used correctly there's very small risk for marring. Proper lubrication and zero pressure on the clay is pretty safe. Clay and seal packages wouldn't exist if it weren't reasonably possible.
How do you feel about claying ceramic coating? I’ve seen a need when maintaining coatings that I haven’t seen in 6 months to a year, and I don’t want to expect clients to recoat and pay for a polish6 months after paying around 1k for a 3-5 year coating.
The next best thing is an all in one polish where it corrects and adds protection. Other wise if you just wax or add protection after clay you may notice your paint appear cloudy from marring or not at glossy.
@@imjoshv and Josh you are one of the best, together with Pan, Wilson or Forensic, who's videos I m watching ALL OF THEM cause are so exhaustive, complete and professional to help and give tips and tricks to approaching baby detailers like me. Great job mate 👌👌👌🤷🏼🤷🏼🤷🏼👍👍👍
Great video and great information. I've noticed recently on the videos your pressure washer hose is a dark color - not the bright blue of Uberflex or bright green of Flexzilla. Are you using a different brand now? What polish do you recommend after claying before a ceramic coat?
Most ppl will have years coating on it, but it feel rough few months later, if Polish after Clay, which means we need coating the paint again? Any suggestions?
Is there need to clay a few months old 7 year Ceramic (H9) coated paint? Guess the best thing to do is look at & feel the paint after washing it. If I need to clay & use the proper amount of lube & pressure, would the clay holding any contamination scratch the paint to the point I'd need to polish, once again I'd need to look afterwards. So at last comes the questions I need your help with & let you answer, what would I use to polish a H9 coating? And would I need to reapply the coating again afterwards? I'm guess no, I should just put down a coating of something to protect & to fill the holes the removed contamination left behind. Or am I wrong? But would "holes" in the H9 coat be compromising its structure after everything I needed to do to keep the H9 coat from "falling apart" ... could moisture get under it a lift it off the paint? Guessing I need to learn more about its atomic structure & how it bonds to the paint & are Ceramic coatings are self repairing. And if a car has a problem with paint chipping easily from driving in traffic, would a Ceramic coating stop it from chipping? My daily car is a Mazda CX-5 with the notorious Soul Red Crystal Metallic, it is very well known to have a problem with chippy to the point owners on Mazda fansite forums are trying to get a class action lawsuit started.
So, if I live on the coast with all the salt buildup (Car really needs regular washing) I may need to clay it at least yearly? (My nephews car stays outside in the weather) What if it has ceramic coating? Would it still need claying? Polishing after the clay with the ceramic coating? Then re coat with ceramic?
Josh, Another very informative video - Thank you. Question: My truck sat under a tree in the Pacific NW for a couple years while I was overseas and now it has moss, dirt, lichen, tree sap, and who knows what else covering it. I'm sure I need to clay, but how do I know which grit to use?
Just go with medium or heavy. Light clay is only for every 8 months or so on cars that are well waxed or coated. Anything less than medium is just a waste of time in your scenario
Thanks Josh! Planning on decontaminating, claying and polishing a neglected Scion xB in the very near future... first time for me regarding all 3 procedures!
After I Clay is it recommended to use a panel prep prior to starting my compound? And after I apply 3D One do I panel prep prior to a wax or will it strip the 3D One?
I noticed u use a disc clay in some of ur video s during ur wash. Do u polish after that as well? I d like to clay my car but I don’t know how to polish with DA. Can I polish by hand or will it not be good enough? So maybe just forget the clay?
Blah blah blah!! 10% dawn dish washing soap and 90% water will do better than any product these people are trying to sell you for the couple bucks they get for product promotions!! 🖕 prove me wrong!?
Great vid and tips again Josh. Question, whats the best way to get rid of harsh wiper marks out of the windshield? I tried the yellow clay, it cleaned up the windshield but didnt get rid of the streak.
Dude you got to slow it down,to much information at one time on all your videos, then on alot of your opinions you have never used the product your just going on here say,you confuse alot of your viewers, your so wishy-washy on alot of your opinions, you act like you are in a race,dude slow down and keep it simple,lay the pipe down for awhile
Gotta be honest I’m scared to clay, due to me being a novice to polishing. But your clips are absolutely a confidence booster. Maybe in the future you can give us “driveway” folks a step by step? Pads, compound etc? Baby steps for some if us baby’s lol…..thanks Josh
I just posted a full video on how to do a complete polish and compound, iron decon and clay bar post yesterday! It’s my recent video
I second this… beginner polish or light correction. Speed and pads dumb it down. My car got some car wash damage I d like to fix.
@@KeysDetailing - you should post a link to your vids if you want ppl to watch them. This comment is over a year old but it's impossible to know if it's closer to 1 yr or 2 yrs old. Posting a link removes the ambiguity and makes it easier on everyone.
I did it! 5 year old White Jetta never been clayed just stated down the detail road and wow, just do it. I used iron remover and a rinsless wash. What a difference now I just got to get the confidence to polish nd paint correct.
Dude!! You’re a lifesaver. I was about to clay my vehicle the traditional way. I had to search up a new method and for some odd reason you popped up on my recommendation list. This new method of clay bar looks way better than the little clay bar. Definitely going to order this today.
Thank you for posting that Josh. I actually had some clay on me, but I was thinking to grab those clay mitts from The Rag company just because it is easier. Glad you explained in detail the difference. It helps a lot!
Very thorough explanation of what Claying does and not does. Excellent review of products. Thanks Josh
Thanks!
Right on man. As a beginner in the car detailing business i have to thank you for your videos. Thank you for sharing your knowledge man, you’ve helped me a lot already
Love the clay scrubber from the rag company. Had to get my hands on it as soon as it came out. I find it to be very useful for stuck on bugs and debris along the front of a car when I pair it with p&s bugoff before a wash with p&s pearl auto, which gives a ton of lubricity so theres never really any marring at all. Great video!
Thanks! Yea its a fantastic tool to have
What is the orange clay lubricant your using? Awesome channel learning so much!
I’m the one that told you to try them 😂. I’m so glad you like them man! Haha. I haven’t used the mitt or the block but man that material is great. Great for cleaning as well, because you can see the contamination come off. Sorry my rant is done 😂
I just wanted to say that I’ve recently gotten back into detailing. I make a bunch of how-to CZcams videos on car stuff and track days, and just wanted to chime in and say thank you for the videos you make. Extremely helpful, well done, and to the point. Keep it up! Subscribed.
Thanks Josh you saved me a lot of trouble I am on well water and was going to leave my car wet when I clay my 2006 Subaru Impreza
As a rule, I generally use the Mother's Synthetic pad for my primary claybarring. The one very important aspect of my process is that I keep a well dampened Terry cloth hand towel folded lengthwise over my shoulder. 2 virtues are because the towel is damp it tends to stay on my shoulder [I generally wear a t-shirt] and after several passes with the synthetic claypad I wipe it clean while the towel is still draped over my shoulder. It is quick and efficient- MOST IMPORTANTLY - it keeps the pad clear of contaminants! It is amazing how much crud [depending in the vehicle] can be seen in the towel. It certainly keeps any potential marring to a minimum.
As Josh mentioned about the mitts - keep them clean. It makes the difference!
great points!
@IMJOSHV - Car Detailing and Reconditioning Tips Thx Josh. Happy to share a tip here and there. Love your channel! 🤝🤜🤛
@AudieConrad -
Good to see that you have had success with these pads. I plan on using the Mother's Speed 2.0 clay soon for the first time on a very neglected Scion xB. If you have one near you, I found them available at Ollie's for $9.99 each... along with quite a few other Mother's, Griot's and Chemical Guys products at greatly reduced pricing.
@superado2k Gee, that's a better than good price! Don't know the store but will look it up - thx 4 sharing. Good luck with your project. Shine on you crazy diamond!
By the way ur videos are the best! Love the way u give ur real opinions trying out products. Ur easy to listen too and address the topics nicely. 👍
The rag company clay towel and sponge are the best for very minimal maring.
Awsome video. Your channel is my go-to for car detailing. Well done, sir 👏
Great explanation Josh. What about using the mitt or sponge with a high lubricity soap? Wash then foam with something like Mr. Pink and clay with that in the shade?
I just bought a clay mitt, haven’t had a chance to try it yet, thanks Josh 👍😁
Excellent video on the benefits and risks involved with claying your paint. Thank you!
Thank you!
Great video!!
Thanks
Excited to use my sponge!
Josh how bout using a iron remover as the lube ? Knocking out 2 steps in one chemical and mechanical
Appreciate all your videos! Been getting in to detailing and it's been a big help. Just ordered a MJJC Foam Cannon from your site. Can't wait!
Just wanted to give a tip when using a clay mitt or towel. I'll wash my whole car with my regular wash mitt and get it all rinsed off
Then I'll get new/fresh soapy water in my bucket, and just dip my clay mitt into the wash bucket amd clay the car. The soap water has plenty of lubricity for the clay mitt.
Great channel! I'm glad I found you!
What did you use as clay lube? I see it wasn't the product listed due to color difference. Thanks Josh!
I’m also wondering the same?
Thank you so much for making this video, I’m about to claybar my car and I will refer back to this, thank you again!
I too have been using the TRC synthetic clay mitt and these were done to help my ceramic spray waxes bond to the surface I never did any polish afterwards as the car were light colors and the owners were not paying for the service. Most customers want a clean and shiny vehicle and cannot detect a swirl or any micro marring.
Excellent video! I've not used a traditional clay bar in awhile unless you have heavy contamination and then you need to polish its abrasive.
The ultra clay and the DIY Detail clay towel are synthetic like you say. The DIY Detail for sure I know contains no abrasives but you need ample lubrication like Josh has. I personally am primarily rinseless that gives me a little of an edge and then I add the iron remover and clay in one step.
Depending on how heavy your decontamination is, and what media you use. With ample lubrication you do not always have to polish.
I really like this video! That Porsche is going to look fantastic
Thanks, can i ask what iron removal you are using with the clay and is it deteriorating the clay at all? most itron removes are neutral so its probably fine but i just wanted to see what your experience was
Great video love the clay sponge 👍
Hi Josh. Excellent video as always..
always informative thank you sir beautiful car btw
Yes synthetic clay can scratch but if used correctly there's very small risk for marring. Proper lubrication and zero pressure on the clay is pretty safe. Clay and seal packages wouldn't exist if it weren't reasonably possible.
I best clay I used so far is Am details clay bar.
You need to try the DIY Detail iron remover and their towel, no marring in any way.,
Another awesome video. So Josh when you're mobile do you still have deionized water if so can you do a video showing the set up.
It's also good to know if your car has a soft clear coat or a hard clear coat.
How do you feel about claying ceramic coating? I’ve seen a need when maintaining coatings that I haven’t seen in 6 months to a year, and I don’t want to expect clients to recoat and pay for a polish6 months after paying around 1k for a 3-5 year coating.
Thank you, great content as far as I am concerned.
I been trying to find videos, but whats thoughts on claying carbon fiber? Mainly dry. Same priciples as paint? Figured itmight be more sensitivitie.
What if you can’t polish afterwards… what’s the next best thing? Or is polishing a absolute must? Great content as always!
Why was this person's question not answewed?
The next best thing is an all in one polish where it corrects and adds protection. Other wise if you just wax or add protection after clay you may notice your paint appear cloudy from marring or not at glossy.
@@Jnaszty559 thank you! I appreciate your feedback.
Great video! Which soaps do you recommend to use before claying the car
That s such an awesome great fantastic Porsche color 😱😱😱👌👌👌👌
Thanks I agree
@@imjoshv and Josh you are one of the best, together with Pan, Wilson or Forensic, who's videos I m watching ALL OF THEM cause are so exhaustive, complete and professional to help and give tips and tricks to approaching baby detailers like me. Great job mate 👌👌👌🤷🏼🤷🏼🤷🏼👍👍👍
Great video and great information.
I've noticed recently on the videos your pressure washer hose is a dark color - not the bright blue of Uberflex or bright green of Flexzilla. Are you using a different brand now?
What polish do you recommend after claying before a ceramic coat?
I understand that after claying the paintwork, I should polish the paintwork, but after claying the glass, is it necessary to polish the glass?
Can I use hybrid solutions 3and1 detailer as a clay lube if not what is your suggestion?
So - it's actually removing part of the clear coat? Right?! How often can someone expect to clay before it messes with the paint job?
Most ppl will have years coating on it, but it feel rough few months later, if Polish after Clay, which means we need coating the paint again? Any suggestions?
Use iron remover bro
Is there need to clay a few months old 7 year Ceramic (H9) coated paint? Guess the best thing to do is look at & feel the paint after washing it. If I need to clay & use the proper amount of lube & pressure, would the clay holding any contamination scratch the paint to the point I'd need to polish, once again I'd need to look afterwards.
So at last comes the questions I need your help with & let you answer, what would I use to polish a H9 coating?
And would I need to reapply the coating again afterwards? I'm guess no, I should just put down a coating of something to protect & to fill the holes the removed contamination left behind. Or am I wrong?
But would "holes" in the H9 coat be compromising its structure after everything I needed to do to keep the H9 coat from "falling apart" ... could moisture get under it a lift it off the paint?
Guessing I need to learn more about its atomic structure & how it bonds to the paint & are Ceramic coatings are self repairing.
And if a car has a problem with paint chipping easily from driving in traffic, would a Ceramic coating stop it from chipping?
My daily car is a Mazda CX-5 with the notorious Soul Red Crystal Metallic, it is very well known to have a problem with chippy to the point owners on Mazda fansite forums are trying to get a class action lawsuit started.
Can synthetic clay mar the paint like traditional clay bar?
Can you review the Feng pai foam Cannons? New budget foam kinga
So, if I live on the coast with all the salt buildup (Car really needs regular washing) I may need to clay it at least yearly? (My nephews car stays outside in the weather)
What if it has ceramic coating? Would it still need claying? Polishing after the clay with the ceramic coating? Then re coat with ceramic?
Are you going to review the new harbor freight da Hercules?
Can you use clay for a boat with Gel Coat? If not, what would you recommend?
Josh, Another very informative video - Thank you. Question: My truck sat under a tree in the Pacific NW for a couple years while I was overseas and now it has moss, dirt, lichen, tree sap, and who knows what else covering it. I'm sure I need to clay, but how do I know which grit to use?
Just go with medium or heavy. Light clay is only for every 8 months or so on cars that are well waxed or coated. Anything less than medium is just a waste of time in your scenario
Should i clay towel my car that i dont want to polish after wards?
your website store at checkout will not function...just gives refresh button option.
Hello. Are you able to use the soap you use to wash the car with a clay mitt ?? Like use it after you wash it ?? Ty
Great vid / content! TRC clay pads and mitts both still need to be used on glass prior to paint, correct?
It’s always a good idea especially when they are fresh out of the package
Thanks Josh! Planning on decontaminating, claying and polishing a neglected Scion xB in the very near future... first time for me regarding all 3 procedures!
Do I need to rinse the clay if it’s getting all that stuff off the paint? Or just keep claying?
After I Clay is it recommended to use a panel prep prior to starting my compound? And after I apply 3D One do I panel prep prior to a wax or will it strip the 3D One?
Thanks Josh! Great information. I have a question, will carpro reset deteriorate ceramic sealants like Hydr02 and wet coat?
It shouldnt. Its a ph neutral soap so you should be good!
Appreciate it, keep the informative content coming!!!
@@imjoshv are you able to add a shot of green star to reset for non coated or sealed cars?
What’s your method washing convertibles ?
I noticed u use a disc clay in some of ur video s during ur wash. Do u polish after that as well? I d like to clay my car but I don’t know how to polish with DA. Can I polish by hand or will it not be good enough? So maybe just forget the clay?
It takes a strong man to admit his pride and joy, is that contaminated! Did you polish after?
Is it OK to clay a ceramic coated vehicle or will it damage the coating?
Can I use gold class shampoo as clay lube?
Chemical after mechanical or vice versa?
It really don't look like it needs polish after claymitt.
Hey imjoshv is the Milwaukee cordless polisher safe on paint like the maxshine polisher
Yea it’s the same type of movement (dual action 15mm throw). Safe and cordless!
What is your quick Detailer looks like bead maker
Its froma chemical manufacturer that ive been trying out. It works well but not on the market yet
What ceramic coating do u use? Maxshine?
Yea I like the maxshine graphene coating a lot!! I also use gyeon mohs evo. It’s super easy to work with as well
I bought maxshine. Haven't done it yet. Soon I will try it.
Can u use the maxshine coating on the trim, headlights and windshield?
Can a cleaner wax remove clay scratches
in many cases yes.
If you clay you most definitely will be buffing and polishing your clear coat...
Porsche... what about your '69 Fairlane?
Would you clay a brand new car?
Watching this after I clayed my truck 😂
If you’re claying you’re polishing…No shortcuts people!
Blah blah blah!! 10% dawn dish washing soap and 90% water will do better than any product these people are trying to sell you for the couple bucks they get for product promotions!! 🖕 prove me wrong!?
Dish soap ruins your clay bar little by little 😂
Great vid and tips again Josh. Question, whats the best way to get rid of harsh wiper marks out of the windshield? I tried the yellow clay, it cleaned up the windshield but didnt get rid of the streak.
there are some specialty glass pads and polishes that you can use but personally i havent been able to get the results i want from them
Dude you got to slow it down,to much information at one time on all your videos, then on alot of your opinions you have never used the product your just going on here say,you confuse alot of your viewers, your so wishy-washy on alot of your opinions, you act like you are in a race,dude slow down and keep it simple,lay the pipe down for awhile
Nothing to do with current content, but just wanted to say,, "THANK YOU!" You just saved me $20 on the Maxshine M8S V2, with your IMJOSHV1 code! 👍