How to fix TV main board with usb firmware update software guide
Vložit
- čas přidán 5. 11. 2015
- How to fix TV main board with USB firmware update software review, usb update repair works for Sharp Aquos TVs, and Sony, Samsung, Vizio, LG and more tv models, fixes internet issues, apps problems, audio and video problems. Sharp TV update bit.ly/1OuKOq6
get tv parts, tcon, inverter, power, main boards at shopjimmy.com - Jak na to + styl
Way to go! I ordered my replacement main board from one of your recommended suppliers and I was delighted to find your helpful video on doing the software update. MY set is a smart set but I am sure that the manual method would be a better way and perhaps faster. I am awaiting the replacement board. Thanks again for your very helpful videos.
Omg THANK YOU SO MUCH, I have a 48 inch, no firmware for it on the sharp website, I used the 55" firmware and I was way too happy when I saw it come on
Amazing!...It worked perfectly. I was about to call a technitian for changing the main board, but this fix did it. Problem: TV was on, but all what I got was a frozen black screen - Solution: firmware update.
Thanks mate, you helped me a lot! Cheers!
Thanks for this! My Sharp Aquos 55LE653U was stuck in an endless reboot cycle. It was not getting far enough into the boot cycle to recognize the set of button presses to bring up the factory service mode. After inserting the flash drive with the firmware file, the instructions from Sharp said just to restore power by plugging back in and wait for the white front power light to begin blinking, indicating a firmware update in-progress. There was nothing displayed on the TV during the update. The update took 3 minutes, after which the TV rebooted and came up in the initial setup menu. Fixed!
Sharp requires one additional step with my model: With TV powered on, use remote to enter "MENU-2489". This brings up the service menu. Navigate to Setup/Clean Storage and select "YES". I believe this clears out the EEPROM settings. Power off and on to restore normal operation
df9999999999 this is the same tv i have, sharp logo comes on and off. this fixed it for you??
how did you get the tv to power on before you did the "menu2489" step ? was it just during the boot loog loop? and , do you have that firmware by any chance?
Thanks, I just fixed the TV of a friend thanks to this video
I'm working on a sharp lc-60le950x tv with problems on the mainboad, for all modules I've checked normally including backlinght, I'm having trouble finding software for this type do you have this type lc-60le950x?
omg!!!!!! thank you sooo much for this !!
would the led driver be located on the main board? flashlight test i see an image (no signal). but no back lights so i watched a few of your very helpful vids. and led me to that.
Ok, soo, I had to download the firmware from reddit. I bought a 8gb thumb drive off of ebay. I formatted the drive with FAT32 (not the exFat that the video shows) and I had to uncheck the "quick format" option. I then renamed the unzipped firmware file to install.img and copied it onto the thumb drive. Then I unplugged the TV and held down the power button for 30 seconds to drain the power from it. Moment of truth, I plugged the thumb drive into the USB slot, and plugged the power cord back into the TV. I did not press any buttons. After 3 seconds, the power light on the front of the TV started flashing and blinking white. This continued for about 10 - 15 minutes till the TV turned it's self back on and went into setup mode. After setting up the language and timezone, it works. I took the USB out. Golden.
Hey Tampatec, been admiring your work. Any hint on a Panasonic TX 58AX802b that starts up gets stuck in logo then turns off with 13xflashing red(faulty motherboard)? Tried firmware update - no go.
Can not find new MB worldwide but hoping there might be something else I can try? Its a 4k beauty, hate to see it wasted..
Cheers
would the led driver be located on the main board? flashlight test i see an image (no signal). but no back lights so i watched a few of your very helpful vids. and led me to that. model # SE322FS
@tampatec I tried the usb and it still was stuck on the reboot screen logo, where did I go wrong? I noticed that the usb drive would light up for a second and then turn off. Do I need to buy new main board?
What if my tv has no firmware in that list? Can I use a different one? Mine is LC-49xu
tampa tech, cannot find the software for serial 3 like you downloaded, got a copy for a lc70c6500u??
Excellent tutorial
Will you please help me with abaj led tv
Model LN 60T
How can i update software
Screen show only blue color
Hi! Thanks for the vid! My 3d tv (un55d7000) keeps turning off and on. I have about 15 to 20 seconds once it turns itself on to do stuff with the menu and then it locks (can't even change the volume) for like 10 to 12 seconds before it turns off again. All this "ad infinitum" Do you think if I plug in the usb with the update before I do the hard reset it might give enough time to for the tv to update itself?
Hello I had to replace the main board on my Sharp LC-60LE640U and when I plug it back I don't get the menu on picture (Cable Coxial was connected) do I need t o do the Firmware update after installing the board?
Hi, I have a Sharp LC-55P6000U model tv and it displays the sharp logo and then goes blank(led lights are still powered on). Will the firmware update fix the issue or I need to replace the main board? Would appreciate a reply. Thanks
thanks for this...but my tv model, lc-32le375x does not show from the selections. ur helpful advice wud b a huge help.
Thanks a lot
Thanks. I have skyworth 55e200a I need firmwar
I'm your biggest fan, thank to this video i got my tv back!!! 👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼
hola amigo donde puedo conseguir el firmware para el kdl-46nx700 ya que sony retiro el soporte para este modelo,gracias de antemano
Does this work for Philips TV's such a their 32PFL5332D/37 firmware downloads, too?
great video,need help my Vizio 55 led tv turn on OK but no sound,noticed the front standby light is off usually yellow also my HDMI don't get any response please help
god bless
Hi I have a sharp lc le654u model tv that is stuck on sharp logo. I purchased a motherboard replacement and swapped it but still get the same issue. would this update be possible for me being that i cannot get to menu at all? any help would be appreciated thank you
What format is your stik ?ext fat or fat 32 or ntfs. please tell me.thanks
Just hope it works for this LCD Television of mine. I think it has other issues, too. Set goes off in about 10 minutes, then you get 6 flashing lights, pause then 6 flashing lights. It's continuous and the set won't come on unless you unplug it to let whatever is heating up cool off. I think it's diodes. No bad caps noted
Hello tampatec, my sharp lc49cfg does not have buttons on the side, it has a toggle- so its going to be impossible to do, is there a way around this , its stuck on logo loop and the usb is not recognised. I cant afford to replace the board, is there anything i can do to the board?? love your videos mate:)
Good day!
I updated the software of my Skyworth LED TV 32E3300 with a wrong Merge.bin resulting to blackout of screen and cannot be turned but only standby. Tell me how to fix my TV into normal and how to do a proper software update. Thank you very much for your favorable response.
Whooohoo. Had my Sharp Aquos for 2 years... it was stuck on the Sharp Logo screen. It would not turn off unless unplugging. Tried all the resets for TV. They did not work .. This works, did not have to take off the back off TV. Just plugged the USB in n the TV reset.. After that just input all the stuff, when you first got the TV (antenna, time, type of wireless)... 👍what a relief 😅.. didn't have to watch how to change motherboard
christyxy702 yes!!! I did the same 🙏🏾🙏🏾🙏🏾
Hi how did you get the file, is not in the website anymore, could you send me the file?
I updated my 2012 32"Samsung HDTV (not smart, using as a second mac monitor) firmware via USB. Got the update from Samsung's website. Turns out the firmware on the TV (same as when purchased in 2012) was already more up to date than the update on the website in 2020. Now my TV doesn't work at all, not even as a monitor. Remote still turns TV on and off, back light works, but no other remote graphic. Any suggestions? Did I brick it?
Any idea what I can do about an RCA RLED4778A with a red screen that states program update (recovery) every time I plug it in. The screen automatically comes on when plugged in. Even if I remove the equipment connected.
Hey Tampatec, I'v been stuck on this Sony Kdl-75w850c. It started out with 6 red blinks which watching your videos and others figured out it was the light strips but put in a new power supply board anew t-con and a new main board because it's my mom and dad's TV. which I will never do again, this TV has been in my living room for months now and I'm having nightmares about this TV. Now I have to put the new firmware on the new main board But I have no back-light. Do I have to put the firmware on the TV before I tear down this xoxo I mean this nice Sony of my mom's. I wish there where more people like you to really put there hearts out there to help other's, I really do thank you again for putting hours and hours of video, you are a celeb in Sac,Ca..Tony Montiero
Hi my Haier TV stuck on stuck up screen I press input menu power it works a couple time but it's not working anymore it just the unstuck of scream what do you think
How do you correct screen with left side dark shadow on 70" sharp Aquos TV model # LC70LE650U.
where do I get firmware for magnum TVs ??
Hello friend, where can I get the firmware for the kdl-46nx700 since Sony has withdrawn support for this model, thanks in advance.
hello,
have you got a firmware for tv sharp lc-46le730e ? thank you
hello sir . do you have a sharp lc-40le360d3 firmware
Hello, how change logo star up on main board Tp. vst 59s. pb801? Please help me
can you show us the components of a tv tuner card in a tv..
always wondered if tuners can be switched to an auto selection mode.. so being able to detect the region by the incoming signal.
Thanks for your videos. They are very good and very informative. I am trying to avoid replacing the board on my 60" Sharp Aquos. Sharp sent me two firmware files and instructions to manually install the files not using the menu. Instead, they have me doing a series of steps and to be honest, their support isn't great. The steps they sent me was 1) unplug 2) power on the tv 3) hold the power button to shut it off and keep it held for about 5 seconds until the triangle flashes on and off then release power button. Then press the power button AND the Channel (whatever that means) at the same time to initiate the install of the USB firmware.. That doesn't work, it just turns the tv back on. Any ideas? the menu update doesn't work.. It is a sharp model number LC-60LE810UN. They had to send me the firmware, it doesn't exist on their website
Hi will this work on a magnum 42" TV where the mainboard is not working
Hi, I updated the software on my Grundig (Tv 40 VLE 8270 WP) with the wrong software from (GRUNDIG New York 40 S WEB) and after updating I get no further picture. It is likely that you can restore original programs but I can not get the Picture running. Original softwares that were on television from the beginning was TPGRMR.-.- .-. V05.013.00. When the TV starts, I can hear that the channel is on and I can change channels but no picture, please help me fix the TV. I thought other software could help me get the youtube app to work.
Hello. I search a firmware for Sharp printer, model mx-c300w, for a firmware restore. You now where I can find it? I search in my national driver support and us support but I don't find it.
Thanks! I went to this site and my sharp model LC65LE645U is not listed. Can you advise?
Hi i have a samsung 55" 3D LED TV Model # UN55ES7100FXZA
Serial # Z5HP3CACB00035Y. My wife kinda messed 2 usb ports by tripping over the cable while they were connected. Is there anyway to just replace those damaged usb ports or do i have to replace the entire mother board ? Thank you for your time sir
@TampaTec
I cant find to download Firmware Upgrade for LG M2362D.
Does anyone have any link to sent me?
can you help for tcl firmware upgrade
Where do I can find TH-32C410K Panasonic LED TV firmware
I have a non brand china LED tv.which is not support mkv file.if i convert mkv to mp4 then i can play.I have found an option of USB software update.But i didnt found the manufacture website for update softwre.What should i do? Thank u...
I want to update my Philips LCD TV 46PFL5505D/V7 firmware. But I am worry about if something goes wrong then how to revert back. Do you know how to revert back ? Any tips for me ?
My 55"Sharp smart TV aquos stuck on Sharp logo and fades away ,ik hear audio very good from the local channels backlight lit ,but no video,can you help me with the right firmware to update,because I cant download the firmware from sharp USA,cos it gives an error if I select the model number,my TV is LC-55P6000U
I ask you to help me with a problem: after updating my LG TV model 42LE7500, it now turns on and then turns off. I made an update via pen drive, and when the TV was rebooted, I started to present the problem. The file has been downloaded on the official website, and I have already updated some LG TVs in the same method, no problems, I've done everything I could, I tightened the screws all on the card, I pressed the reset button even though nothing was right, there is a method of how to restore the TV. Please help brother with some tips. force
Hi. I have a mitsubishi model Wd-65733. think it may have been struck by lightning. I replaced the power board but can't get anything. any suggestions? thanks
I have a Sharp LC-70LE657U that I am trying to fix the main board using this method but I was unable to find the firmware download for this model. The sharp support site does not have the firmware for this. Does anyone know where I can download it?
I know this is an old video but I hope I can still get an answer. I followed all of your instructions and when I was ready to do the update on the TV, I got an error message saying that the file is not detected in the USB memory device. I tried formatting the USB several times and it still didn't fix it. My problem is that I get a black screen when trying to access Netflix by the way. Software I downloaded is the same one on the TV.
Hi, can you help with firmware for JVC LT47N95 Smart tv
I have a vizio M3d421 SR tv that won't turn on. I have a suspicion that it may be a firmware update issue but I cannot find the firmware file anywhere to download. Can you help me know how to fix this issue?
I need help, cant find an update for a konka tv...
i got my leeco super 4 x43 briced during firmware update only red led remote is aloso not working not turning on the tv help please
Hi there. i have an issue with my sharp tv, i performed an update through usb and my tv now has now sound or not clear picture. how can i resolve this issue? My model number is lc-40f13322e and i cannot find an appropriate firmware everywhere else.
You Vedio is useful...
I have problem with my singer tv led model tle470a,software need to update,please can you help to solve problem?
Please help me with the firmware for SHARP AQUOS LC 42LE860H 3D SMART TV
I have problem my on SonyTV
KDL-47W802A from 1 year my picture quality very poor video noisy and color not quality as well contrast low, I see HD content like SD content ,
are you advise me to replace my main board
Hi...Need your help pls..what can I do with a JVC 65" SMART CLOUD TV IF IT'S JUST LOADING BUT NOT OPENING ?
I have a problem with a mitsubishi tv model LT 46151 the image was flushed when I installed a penddrive to see some photos and videos. Where can I download the software and if someone has it, could it happen to me?
What program do you use to for the computer screen streaming?
Thank you.
+DizzzyKipper either screencast-o-matic (good for basic) or geforce shadowplay (gameplay) both free.
+Tampatec Thanx.^_^
Hi Im sorry to revive your post but I was searching for something like this. I have bricked my samsung tv by going to service menu and selecting micom upgrade option, then it was allways on waiting and without thinking cause I should know better from experience with bios upgrades on laptops I turned the power off. result tv completly dead, I have tried to short the eeprom by connecting vcc to sda with no success, but also from my experience with computers I think that should be some way to force the board to load the firmware from a usb or service cable or even from and external floppy. Do you have any tip or idea on how to solve this? thnk you in advance and I would appreciate any help I could get with this
Hi I have Panasonic plasma 50inch when I start my TV it's only shows logo nothing comes after that I have downloaded the firmware from Panasonic site want to know how to install in TV is there any software to connect with TV with computer and install the software in the tv
Hi. I have a Sharp LC-70LE657U and cannot locate the firmware anywhere online. Please help me find the right firmware. Thank You.
Please help me why our sharp t.v. cant detect my flash drive/usb?
I did the same as (A Fields) but with the correct firmware for Samsung LED TV UA39EH5003, i got a blank screen with a standby red light, Keep in mind a installed older firmware the last 2 years but it worked correctly
Hi i download the firmware for my tv and extract it to flashdrive and it extract it to a folder the bin file is in this folder must the bin file be outside this folder
this tv is work but if the main boar is did and the problem in firmware how we will do the force firmware reflash by usb some say in samsung press input but it didnt work
Hi i have 42TL515U toshiba tv. As soon as i power it on, no pic no sound. Only green light on front side is blinking 3 times after interval of every 3-5 sec. Any idea for this problem.
I have TCL 60e6000us stuck in startup loop. How can I use a usb to upload firmware l?
Hi, I have a smart tv sharp 4k model LC-55P6000U and the page web of sharp no find the firmware. The TV signature was uninstalled. It does not recognize the input ports, the buttons of both the control and the TV do not work. Only the on / off and channel. Could you tell me that another firmware version is compatible. And that can be downloaded, where do I find it? Please could you help me.
What do you find is the most reliable LED/LCD tv brand?
Toshiba has low repair rate but I saw that in consumer report magazine few years ago.
I stay away from Sony cause many Sony lcd panels have been defective which is unrepairable. any tv I can fix I like. I still have my old samsung tv I fix in my first video over 5 years ago.
plise DUMP tosiba model 32RL938
We bought a Sony ( the tube type) t v which lasted only 2 years. We replaced it with a Toshiba 37" that kept working for over 15 years till this date when we gave it away. Of course, I'm talking about the early 2000's when big boxy tv's were commonplace,
Bought a 37'' Philip TV 5 years ago and it's still working. Bought a 56'' Toshiba last year and it lasted only a year.
Where do i get the repair kit for the sharp main board Qpwbxe373wjzz
Help! I’ve replaced the main board and the power board on my Lc-52sb55u and still not functioning......
I’m having problem with my Sony XBR-65X850e, it shows some
Kind of lines after Sony logo. I have changed t-con board. Still it remains same
how can i find soft ware for denka
Hello tampatec. I have an inquiry. I bought devant smart tv 2 years ago. Recently we decided to have an internet connection. When we connect the tv to the internet, we tried to use the applications like youtube and the tv browser. But nothing happened. It just turned black and then back to the applications. Need help please. Thank you.
Very Nice!!
My Sharp Aquos Tv got a problem with the HDMI connection between the TV and PC...My PC recognize the TV but the TV don't react..so i tried the software update from this video and it work! But... everytime i close my TV for more than like 2 or 3 hours the same problem happen and i need to repeat the software update with the hard reset .. is there a way that it can be fix?
Hi, i have problem i downloaded a wrong software update in my Sony bravia klv-40bx400 tv is there a way to update to the previous version?, or other way to fix because i no longer receive any Chanel feel sad 😔
I have a thomson 65ub6406 and i put the usb stick with the software update on it says software file check failed do you know what to do?
I have a Sony Aquos that is pixelating. How do i fix this?
cannot find the firmware to my LC-49CFG6001K any help please
I live in Ireland and I'm trying to put my tv model number but it won't work when I press enter. Help !
HI, I DO HAVE SHARP AQUOS MODEL LC-50N8002U CANADIAN HAS SEAM PROBLEM I COULD NOT FIND ANY FIRMWARE ONLINE AS WELL AS THE VIDEO BOARD TO REPLACE IT PLEASE IF YOU HAVE ANY SOLUTION FOR ME THANKYOU
I need software update file to (ld46hk07a)Tv please.
Hey any idea how to Uninstalle an update on my 900e
Hi, I have a sharp tv Lc 70le660u that goes off immediately after displaying the “sharp logo”. I’ve tried hard reset but didn’t help. Pls kindly assist. Thanks
I downloaded the software(for Telefunken D48F275R3C) from Telefunken company and saved it on a new formatted USB stick. and during the installation I pressed the OK button on the remote control and the LED also blinked for a while but the screen remained black and I tried again but unfortunately without success, and now the TV doesn't work anymore when switched on, the screen is always black. I have completely pulled the TV out of the power and all the cabling out and i repeat this procedure but the screen remain black and the LED does not flash anymore. Can you you help please?
i want to do this with a hitachi lcd but i cant find the updates-.- model CDH-LE32FD06